layer selection event

Similar Questions

• I want to value report a selection event (user) menu

  Hello

  1.i want to value signal a selection event (user) menu of the first image of the sequence structure, a vi and the watering duration menu is attached.kindly solve my problem.

  2. can we use fixed menu point info function in one event other menu then selection (user).

  Thank you

  If you want to run this code unconditionally as a first step, you don't need a structure of the event. It would make no sense at all, just do the following:

  

  Just use plain old dataflow instead of a sequence. Use the mistake to enforce the execution order (not shown).

  (btw: your question.zip file is not a zip file.) To open it, we need to rename it to question.rar first. Is there a reason why you changed the extension?)

• Errors with the selection event

  Hello everyone!

  I have two problems in an application I'm developing, I would like your help.

  My first problem:

  I have a table, this table each row includes a checkbox. When I click this checkbox to perform an operation, the "Event Selection" event fires. This line has a "Event Selection" event so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  My second problem:

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  I appreciate everyone's attention.

  Hello

  "Event Selection" so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  By selecting the check box check must also select the row (you should see the selected highlighted line). Your message does not have a version of JDeveloper, so I blindly suggest to check what you see with a newer version.

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  
  

  Well, the listener of selection is more of a selection to change listener and with one line, there is no change in the selection and the single line is automatically selected. So the question is what the code is that the selection listener must invoke.  One option is to call getEstimatedRowCount on the iterator and if there is only one line, run the logic otherwise performed by the select listener

• How can I change the color of the user interface of a layer selected in PS CS5.5?

  Hey,.

  I was wondering how to change the color of the layer selected in the palette layers? It's quite embarrassing like that (dull blue/gray) and sometimes hard to see what layer is selected?

  I prefer the lighter blue on my other computer.

  Any advice much appreciated

  

  Oh, I missed that you said cs5 and cs6 not?

  Post edited by: R_Kelly

  If it's cs5, have you tried to change the highlight color in preferences under appearance, or general system?

  

• [JS/CS4/CS5] Capture a selection event in a ScriptUI interface.

  I have this ScriptUI (javascript based) interface, and now I wonder if it would be possible to change one of its legends of button based on the question of whether something is selected or not, in the current document (will also be updated if the user selects or opens another document).

  1. is it possible to write for this event listeners?

  2. it would be possible to include this in the same script as the rest of the code of the Script UI interface (in other words, I prefer to avoid a separate file in the startup folder).

  3. What is the best source of information about the events, those who are and how to manage them in javascript?

  Andreas

  1. Yes. Selection events work well in my experience.

  2. Yes, you don't have to add them to the boot. You can do something like:

  app.addEventListener("afterSelectionChanged", selectionChangedFunction);
  

  before opening your window. Remove the window onClose event listener. I think you should make an error recovery in the selectionChangedFunction against any mistake app.selection after a close document or in the course of a previous version.

  3 see this thread for an extension that allows you to see events as they pass you.

  Jeff

• Cintiq 21UX/Photoshop CS4 / Win 7 64 b/layer selection problem

  I have problems with Photoshop CS4 and the selection of layers.

  For example, when working with an image with multiple layers, suppose I have 3 layers and the middle layer has a line drawing. The first layer's color. Suppose I want to get through the lines below. I first select the tool move, then I select the layer containing the lines in the "area of selection of layers", then I switch my stylus to paint and if I touch anything other than the line in the picture that I'm working on (for example some traces of paint), the layer containing the traces of paint is automatically selected in the 'selection box of layers' and what is inappropriate.

  
  In other words, when the move tool is used, I select the layer by touching the image rather that by selecting the layer in the layer selection box. Very frustrating. In this case if I am using the mouse or stylus.
  In addition, if I do a group and you put several layers, I can't move the group. If I put the stylus on the work surface, the group opens and inside layer is selected. Again, this happens if I use the mouse or stylus.

  I'm running a Dell Studio XPS 8000 with Windows 7 Home Premium 64-bit, have 8g of ram and using a Cintiq 21UX.

  I went into the Panel control/Pen and Touch and 'Movies' is disabled.

  I went into Photoshop and deselected preferences "Select panoramic Flick".

  I went in the utility preferably the Wacom tablet and deleted all my preferences, uninstalled the driver for Wacom Cintiq and reinstalled the latest driver. No change.

  Can anyone help with this? It's driving me crazy. I called Wacom and the support guy said he thought it was something that needed to be turned off in Windows as Microsoft has a setting so that select you automatically the nearest window to the top of the screen as you watch.

  Thanks for any help, pg

  Yes I agree, this can be real boring, but there is a simple solution.

  In your taskbar, uncheck the automatic selection.

  

• Best way to detect the select event list?

  Hello

  I have a ListField where I get many elements of the list. Whenever we choose any item in the list, I would like to immediately detect which line is selected with its data. What is the event to be perfect to achieve this goal? I tried, 'invokeAction', but is not detected when any list item is selected in the listview.

  Thank you.

  I prefer this and then adding a listener to changes to the ListField.  In the FieldChangeListener, you must use "getSelectedIndex".

  SerializableAttribute public class ClickableListField extends {ListField

  protected boolean navigationClick (int status, int time) {}
  this.fieldChangeNotify (3);
  Returns true;
  }

  protected boolean touchEvent (TouchEvent message) {}
  If click process changed field
  If (message.getEvent () == TouchEvent.CLICK) {}
  this.fieldChangeNotify (3);
  Returns true;
  }
  Return super.touchEvent (message);
  }

  }

• How can I change the color of a layer selected in the layers of grey to blue Panel?

  When you work on an image editing in Photoshop CC 2015, the layer in the layers panel highlighted is a gray color.  In tutorials, it appears as blue.  How can I change the color in my layers panel so the highlight layer is blue, not gray?

  I don't think there is an option to set the highlight color for the selected layer - the shift from blue to gray was introduced between 2014 Ps and Ps 2015, tutorials where you see the highlighted in blue are probably just be using an older version of Photoshop.

• How can I activate / display the layer selection indicator?

  Hello

  I use Indesign CC 2015 since shortly after its release. As in previous versions of InDesign and other applications (such as Illustrator) Adobe, there is a useful feature in the layers panel, which allows direct selection of a layer or layer point. It appears in the layer panel to the far right of the layer element. It is a small square and it becomes highlighted/provided that layer/item is selected. I have a page of InDesign CC 2014:

  

  It's a blue square in the screenshot above, next to the pencil icon bit. This square icon disappeared from my indesign layers CC 2015 Panel. I searched preferences, Options for the layer, options, modes of display panel, I can't, and I use it very frequently. How can I turn this feature on? Help, please!

  Thank you in advance.

  -Aaron

  See replace your preferences

• Photoshop CS6 [command + click] layer selection "Problem" solved

  Good afternoon fellas,.

  
  I recently noticed something rare when working with Photoshop CS6 under Mac OS X 10.8.x.
  When I tried of course select a layer by the [command + click] (say) shortened, it failed. This little thing was driving me crazy, and I don't know that he must do some people without hair, too.

  Anyway (s), looking at another thread to read-only, I noticed the problem has not been resolved and received pretty lame recommendations. Luckily, I finally found the solution and was able to solve this small inconvenience that maybe we've all experienced. So here's the workaround solution, then maybe you never will consider downgraded to 5.5 again as I was thinking:

  (1) in Photoshop, make sure that the move tool is activated by pressing "V";
  (2) in the submenu of the tool, forget the selection/marking 'automatic selection '. I know that sounds nonsense, believe me;

  (3) Although, sure of 'sex' is selected next to the 'Automatic Selection' button and you should be as I am.

  I hope this can help some people! I would be very happy to know, since I just created this account to help you guys.
  I don't know if this problem has been resolved and already posted, I'm sorry. I want to just make sure that we will all be happy!

  See you soon,.
  "Let him go, Jack."

  I was wrong! The Cmd key override to always activate the automatic selection. She calls the opposite behavior from the setting.

  If the box is checked, Cmd will disable temporarily Autoselect.

  If the check box is cleared, Cmd will temporarily allow automatic selection.

• What happened to layer select click option?

  Hi all.

  I use Photoshop CS4 and I was wondering if there is a way to get the old 'option click' to select a layer?

  I noticed he went into this release, but is at - it another command I could use without having to go to the selection > load selection?

  Thank you!

  B.

  Hi Trevor.

  Yes - sorry, I meant click command.  And it does nothing! Am I missing something?

  B.

  -Here's an update: I was clicking on the layer name and not the tile of the real.  NOW it works!

• How can I change the color of the layer selected in the layers panel?

  When I select an object in my PS5 image with the selection tool, it is supposed to select the layer in the Panel (automatic selection on). Depending on where in my line of sight the layer in the Panel, the color is so close in contrast with the other layers that I can hardly find than what I chose. Is there a way to change the default color that indicates when a layer is selected? Maybe they need a black line around the selected layer?

  Note: I will not how to change the color in the "property of layers" window to a specific layer.

  Thank you

  Good to hear. Please mark the thread as 'response '.

• VISA select events dumps memory LabVIEW on serial port

  I recently tried to use the VISA Event functions for serial communication and had a nasty surprise.

  For some reason, it seems to drop a few hundred bytes of memory of LabVIEW in the COM port!

  I do something terribly wrong or is it nasty bug lurking in LabVIEW here?

  You'll need 2 COM ports, a null-modem cable and the attached vi in order to test this. (Null-modem: as long as the pins 2 & 3 are exchanged and PIN 5 connects via it will do.)

  1. connect a COM (A) port to another COM port via a RS232 NULL-MODEM cable.
  2. run the "Port B.vi" (the port COM B value).
  3. run 'Port A.i"(position A COM port)

  4. click on send a bunch of time at random on "Port A.i".

  Result: If it worked correctly you should only get a single WAITING response from Port B.vi for each request sent.
  If the bug appears, you get a few hundred bytes of memory of LabVIEW dumped on the COM port by Port B.vi.

  It does not always seem to do, you may need to stop and start "Port B.vi ' a couple of times and quickly click the button send on"Port A.i"when they run together."

  It happens on 2011SP1 and 2009SP1 of LabVIEW.

  Bug seems fixed in NI-VISA 5.4 that comes with LabVIEW 2013. (Does not test in-depth yet, just using the screws included in the original post).

• VISA select events fails for TCP/IP resources

  When I call VISA activate events to activate Service requests for my instrument of TCP/IP (VXI-11), it returns the 1073807265 error code, "no listeners is detected (NRFD both NDAC are Desassertion).»

  Apparently this error means that you are not connected to your instrument. all the end of Discussion Board by referring to these Knowledge Base articles:

  Error-1073807265 and

  Error-1073807265 or-1073807304 was held at VISA Write

  But this isn't the case here: open/read/write/status-byte /... all operations work perfectly.

  Other observations:

  • What allows a USB connection for the same instrument (USBTMC-USB488), service requests works as expected, so I think that basically, I know what I'm doing.
  • I tried the same operation in the Test VISA Panel in MAX - same result (works on USB, not on the TCP/IP Protocol).
  • I tried Mac OS as Windows - same result.
  • A curious thing: Mac and Windows pops up a warning of firewall when I ran my test program. ???

  For completeness, I included my program small test, which should work with any compliant IEEE 488.2 instrument. Any ideas would be GREATLY appreciated; This thing is driving me crazy. Oh, by the way, I use LabVIEW 2010 SP1 and 5.0 VISA.

  Update:

  The main problem proved to be a problem with the unit - one of ours, being developed. Slot VXI-11 (= IEEE 488.2 top of the TCP/IP Protocol), the event allow visa emits a CREATE_INTR_CHAN RPC Remote Procedure Call (), on which the instrument is supposed to open a socket (the channel of the interruption) to the host. On our instrument, this socket connection was failing, causing VISA activate events return the error indicated.

  A secondary issue was that the instrument requires the status byte to read in order to recognize the host received the interruption. I have that in the original version of my test program.

  For those interested, I attach the output of the software Open Source network analysis, Wireshark, showing the build-up and disassembly of the chain of interruption VXI-11 - the working version and the non-working. I also include the updated release of my test program.

  Special thanks to Lam Dang of NI Applications Engineering (Germany), which got me going in the right direction to solve this problem.

• ChoiceField Select event

  How are we going to another screen on the selection of the item in the Dropdownlist control.

  What is the interface which should I implement

  and what method should I use.

  In your case, it would of course getSelectedIndex CF field.

  Dim str As String = (String) cf.getChoice (cf.getSelectedIndex ());

  It should work.