LCM causes Essbase security to rewrite and can connect is more.

Similar Questions

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• WebCenter spaces managed server error: JPS-01520: cannot initialize the identity store, cause: oracle.security.idm.ConfigurationException: unable to connect to the directory. Check configuration information...

  WebCenter Portal 11.1.1.9.2 has been installed on a single node and configured using external policy based JPS Sotre 11.1.1.7 OID LDAP and Oracle Access Manager 11.1.2.2.0 for Single Sign-On.

  For WebCenter Portal managed starting the server (and all the other managed servers, Portlet, Collaboration, utilities, etc.) the following error message is recorded in the log files:

  <Oct 26, 2015 10:35:32 AM COT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..> 
  <Oct 26, 2015 10:35:32 AM COT> <Error> <oracle.adf.mbean.share.connection.ConnectionsHelper> <BEA-000000> <Failed to get credentials for alias ADF and connection name PageletConnection
  java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
    at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:386)
    at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
    at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
    at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
    at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
    at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
    at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
    at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
    at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  Caused By: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:381)
    at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
    at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
    at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
    at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
    at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
    at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
    at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
    at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
    at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
    at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  

  OID contains all users belonging to a group and can be viewed correctly using DOHAD.

  Users cannot connect to the portal WebCenter or any other application of the field gets initialized because JPS store does not.

  However, the JPS store gets initialized for the administration server, users and group membership can be toured from the areas of security-> users and groups to the weblogic console window.

  A few days ago the users connected to the webcenter content was not asigned no role.

  WebCenter star in the field of content very well, Admin Server and store of JPS is initialized correctly, users and members of the group can be seen in areas of security-> users and groups to the weblogic console window.

  

  This error started to appear a few days before, before that, everything was normal, and users could connect to the webcenter portal group for membership and get the OID and the privileges of JPS LDAP store.

  Servers werer started first, using Nodemanager script to start the server administration, and after that the administrator of the booted server, console weblogic was used to start managed servers.

  Is there a way to debug the JPS Store initialization?

  Hello Amey

  The indicator for OAM ID Asserter is required for single sign on functionality, whatever it is, the problem, seems to be communication with the DNS server, which makes a delay that could be verified using traceroute and ping commands.

  This delay caused the connection failure to the OID server during initialization of JPS.

  As a solution, thefully qualified hostname to OID server has been configured manually to the file/etc/hosts. After this change, JPS can be initialized correctly.

  Howerver, that the log shows no time-out or any other exception during the initialziation, making diagnosis difficult to obtain.

  Thanks for your help.

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I've upgraded to PhotoShop CC 2014 and can access is more to my Collection of NIK.  It worked fine in PhotoShop CC?  What can I do?

  I've upgraded to PhotoShop CC 2014 and can access is more to my Collection of NIK.  It worked fine in PhotoShop CC?  What can I do?

  Contact Nik/Google to update plugins that work in the new version of Photoshop.

• I can connect is more to my connection Wireless on my HP ProBook s 4430.

  I can connect is more to my connection Wireless on my HP ProBook s 4430.  The problem occurred after I allowed the Wizard update HP.  The network card is recognized in Device Manager and claims that it works correctly and that the drivers are up to date.  However the laptop is unable to recognize the available wireless networks and the diagnosis seems to indicate that the problem is with the drivers for the network card.  After spending 2 1/2 hours online with HP tech support after you remove the current drivers and replacing witht latest and disable the NIC in whole and then by reactivating, the tech then informed me that I would need to send the computer and wait for about 1 to 2 weeks to get it back.  Any suggestions on how to solve this problem would be greatly appreciated.

  original title: wireless connection problem

  Do you have this problem is resolved. I have the same problem. follow the same steps. Nothing has worked.

  I have a HP Probook s 4430 and I can't get the wireless adapter to work!

• can connect is more to Z10

  Something strange has happened my Z10 / computer (2007 Mac Book Pro, OS X 10.8). Did some changes tonight. I had left Momentics opened with SSH attached, but the app is not running.

  I unplugged the USB cable connecting my Z10. A few minutes later, I have reconnected and could no longer connect from the development environment. The Z10 gave a message trying to install the link on my computer. Link does not connect properly - don't list not my music, etc.

  I reset the phone and laptop. Same thing. Disconnected/reconnected the cable USB to Z10. This time, reinstalled link, since the phone hooked me on installing it. Now the link seems to be able to see the phone (although sync music hung) and I can browse the built-in flash and the SD card in the Finder, but I can still connect to the Momentics device.

  The specific error is:

  Unable to connect.  Make sure that the Wi - Fi or USB cable is connected, the IP address is correct, and mode of development.

  I can't watch the chips of debugging either. Same mistake.

  I checked several times that the development mode is on. I tried to change the IP address. No luck.

  Any ideas? I really need to get this working again (obviously).

  EDIT: actually... Perhaps the link is not connect properly. He told me that my phone has never been saved, which is false. He got the wifi by the name icon, and there is no explicit backup option.

  EDIT 2: randomly decided to turn off wifi. Finally asked my device by connection password and was able to start a backup. Unfortunately, I was stuck at "preparing backup" for a few minutes now. Don't seem to be getting anywhere at all. In the menu device Link, backup, restore, and delete are available - the rest of the options are grayed out.

  .. .and now it works. I put in flight mode, disconnected and plugged in. Link is finally able to make a backup and Momentics can connect for file browsing, SSH, etc.

  An index to monitor - when he's not working, Finder shows the aircraft mounted with an IP address that is not the IP address of development. I don't know why it took disconnects / reconnects as much to finally use the IP address of development.

  I hope that this had nothing to do with wifi turned off or in flight mode.

• can connect is more

  I am currently unable to connect to my website with dreamweaver or my browser. We have three computers and none of them can connect even if the site is running. There is no firewall or proxy servers is blocking access. This has happened once before, and after a few days, I was able to connect with dreamweaver and browser again. Any ideas? My host server guys say that the problem is not on their end.

  Good luck!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "derfie" wrote in message
  News:er7q34$qkk$1@forums. Macromedia.com...
  > Hi Murray, thanks for responding. Fixed the problem somehow herself, but
  > since
  > It happened twice, I still want to go to the bottom of it. I brought my
  > laptop computer to another location and used the connection to internet of someone else. I have
  > was
  > able to connect to my host via dreamweaver, so the problem seems to be
  > to
  > House, not in the software. When I came home and reconnected to the laptop
  > with my
  > Access DSL, I could access my site and dreamweaver connected
  > fine.
  > Even for my other computer. I spoke with my internet provider who advised
  > me
  > to clear my cache using the terminal utility.
  >

• Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

  I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation.  Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is.  I can files in front on other computers on the network (at home) and I can access the internet.  The active profile is public, although it should be private. I created this to access the homegroup during installation.

  I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.

  What can I do to get this working properly.

  a. no red X

  1. I tried to download a different driver, but it didn't work at all so cancelled.  To check if it was a pilot, I bought a usb wireless adapter.  I've disabled the ethernet connection and used the wireless connection.  The results are the same regardless of which connection I use.

  2. ran every convenience store without success

  3. services were what they were supposed to be

  4 safe mode is worse.  No network connection (cannot see other computers in all), although internet is accessible

  5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records.  Internet is available.

  I installed the software very little on this computer (just installed Win 8 last week.)

  The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.

  The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).

  I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.

  *************************************************************************************************************

  A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.

  To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install.  I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.

• Can I put my Compaq Presario SR5030NX to win 8 and can it use more than 2 GB of memory so?

  Hello

  I have Windows 7 on it now and it works fine, but the specs say that it can take only 2 GB of memory. I didn't know if the Compaq Presario SR5030NX is capable of running Windows 8 and if that would allow him to use more memory, or if the memory is a hardware limitation.

  Thank you

  Tania

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  According to the specifications of your system, the motherboard can support only 2 GB of maximum memory:

  http://support.HP.com/us-en/document/c00910113

• I have a CC account and can connect but I need to reinstall the program, how do I do this?

  I had my computer worked one and my CC Adboe became uninstalled.  I have a password to log on to the adobe site, but need to reinstall CC.  How do I do that? Thank you

  Hi jimmyd15,

  the application of the Adobe Creative Cloud 'Office' can be downloaded here:
  " DOWNLOAD Adobe Creative Cloud apps | Adobe Creative Cloud free trial (or try this direct link)

  Kind regards
  Maurice

  
  

  This answer was helpful? Please consider marking it as 'Useful' or 'Right answer' (as appropriate) to help future customers with the same problem. Thank you!

• Can connect is more VirtualXP in Windows 7 Professional

  Trying to put in place access to the virtual drive c in the "virtualxp" mode, I changed the default XPMuser in my own name and removed the password (since I am the only user). Now, I can not connect to the "virtualxp" mode. When I try to log on without password it says "Cannot be logged on because of an account restriction". If try with my old password deleted it says : "the system could not log. Make sure your username and domain are correct, then type your password again. Letters in passwords must be entered using the proper case. »
  On the Security tab in Windows XP Mode.vmcx properties, everyone, system and all others who are listed have full control.

  How can I return access and log on to the VirtualXP mode?

  Hi Star4514,

  Welcome to the Microsoft Answers site!

  Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.

  "Microsoft's strategy concerning lost or forgotten passwords"

  http://support.Microsoft.com/kb/189126

  You can try to uninstall Windows XP mode and reinstall and check if it works very well. You cannot create a virtual XP Mode without any password, then don't let not not the password field empty. Follow the links below to download and install Windows XP Mode

  Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Install and use Windows XP Mode in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my iphone 6s can connect is more to bluetooth

  When I try to associate a device through blue tooth I can do it no longer.  pinwheel just turn and cannot figure it out.  What can I do?

  What device?

  IS the unit of discover mode?

  Do you have plugged in the appliance before?

• Can connect is more to my email of border through Firefox.

  I use Firefox for some time, but since I have recently upgraded to Windows 7 to Windows 10, he no longer works for my email. What is the problem?

  I just tried to visit www.webmail.frontier.com and got the same problem. It must be because this address is no longer valid, as a result of the Web site that is moved.

  Try to visit login.frontier.com/webmail/ to connect.

• I have an old Adobe Flash and need to update, but I can not connect properly.  I just reset my password and can enter the general Adobe OK website, but when I click on install it won't take my user name and password and let me continue.  What it

  What do I need to get some help here?  I just try and get nowhere?  I need to be able to connect so I can update my Adobe flash player.  I have reset my password and can connect to the Internet site fine - but it won't take my user ID and the password for me to get an update... y at - it someone who cares enough to help? !!  I don't need general thoughts as someone who can guide me through the process to achieve this!

  Hello

  What site are you using to update Adobe Flash player? No Adobe website never ask any id and password to update the flash player.

  If you are using MAC machine and is the password during the installation of the update that you speak, so please follow what userid & password I need to install Flash Player?

  Varun-