Left click on a button on the front

Similar Questions

• Is there a way to put a button on the front panel only when clicked gives a pop-up dialog box with more information on it?

  Hello world

  The simulations that I create are very simple themselves but are intended to use in the classroom to help students learn more about the proven theory.  I hope to be able to place a 'help' or 'other info' button on the front panel that rises wants more info on theory, they can click on it and a pop up appears with background information on it.  It should also have a second button to close it and return to the main façade.  Can anyone lead me in the right direction?

  Thank you!

  Use a structure of the event on the main vi when the button is clicked, launches a "help" void / vi. On the inside of the Sub vi (with the set properties to load the front when it is called, of course), use another structure of the event to wait until then click on the button of the Subvi, you can return to the main VI. Do you need assistance on using the structures of the event?

  Charles

• Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  clear your adobe.com cookies or use a different browser.

• Call a help file (.chm) when press a button on the front

  I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.

  Call the help file (.chm) when press a butto wrote:
  I have only called when press a key then right click the mouse and navigate the selected key for the button.

  This part is not so clear for me.

  But you have coded according to the part file .chm calling within the event to change the value of this button?

  If not try this using the Structure of the event & post here.

  If you post your code here, someone can help reg what has gone wrong.

• Scan of the computer does not work in silent mode of the button on the front panel.

  The machine is the Photosmart all-in-1 6280 on a network of small size and using the HP Solution Center. Basically everthing works fine, but when I use the button on the front panel to scan a document, it seems necessary to walk to the computer to answer a question about whether I want to scan another document until I could walk to the printer/scanner and press the button to scan the following document. Surely, there must be a way to do the scan run in quiet mode so that I don't have to keep clicking OK on the computer every time? I have already disabled the overview of digitization and the prompt for advanced options.

  Oops, forget all that; now I found the setting 'interrogate analyses' which stood on another branch of the installation menus. That solved my problem

• Satellite Pro M30: buttons on the front don't do media control

  Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

  Hugo

  Hello
  to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
  After that I inserted a music CD, and portable he played very well in "offline" mode

  But this time I had to study the manual actually.

• How to customize the 3 buttons on the front of the Portege R400?

  I wonder if it is possible to customize the function of the three buttons on the front of my R400?

  For the moment, they seem to do nothing. I would use both of them as PgUp and PgDn display documents in tablet mode.

  Using the program "Toshiba button Support" I am only able to set the knob to "e-mail" under the screen.
  Documentation, forum, knowledge base do not mention anything about the R400 and three buttons. At least not how we define their function.

  Is to customize their possible at all?

  Hello

  What buttons do you mean exactly?

  As far as I know there are 5 different buttons;

  -Switch
  -Cross-functional button
  -ESC/display rotation button
  -Windows Security button
  -Toshiba email button

  The user manual must provide details of the simple buttons.
  But as I m don't me wrong, the configuration button is not editable. It's fix.

  You're right about the utility of Toshiba button support. This utility controls the functionality of the mail button. It is a single button that can be configured and you could assign an application to the it.

  Concerning

• HP Envy 120: Touch screen does not show. Buttons on the front are unresponsive.

  The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.

  If it is not under warranty take it. Buy something else.

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• Create a button on the front for the diagram

  Hello

  I am looking to create a button on the front for the diagram.

  Is this possible? If so, how?

  Thank you!

  
  

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.

• How to open a modal dialog box of click of a button on the Panel?

  Hi all

  I tried to open a modal dialog box on the click of a button on the Panel the other day. But failed. I managed to have a panel appear on click of a button. But the Group appeared at the forefront of the parent panel. I don't want to. Here are some screenshots of what I managed to do and what I want to do.

  This Panel will appear on the click on the button "Click." Note that the child Panel cannot be moved outside the bounds of the parent panel.

  

  Instead, I want the behavior of the child Panel as shown below. As the modal dialog box that appears when we create a new action game in the Actions Panel.

  

  This Panel can be moved all around the application window. Kindly guide my way through from there to achieve.

  Thank you!

  Post edited by: poortip87

  You can open a modal secondary window like this:

  var w: Window = new Window(); A mx:Window, or your own subclass

  w.type = CSXSWindowTypes.MODAL_DIALOG; in the package com.adobe.csxs.types

  w.Open ();

  There are up to four types of different windows that you can open in the form of secondary windows, although not all are currently available in all products.

  HTH

  David.

• button clicked brings an object to the front

  Hi guys,.

  so I currently have a set of buttons that when clicked, make certain visible items. These objects are layered, and I want to bring everyone forward when the button is clicked, but I fight with the code snippets for "foreground" - I'm pretty new to actionscript, so child stuff is a bit confusing

  Basically, what I want is this:

  button.addEventListener (MouseEvent.CLICK, showobject);

  function showobject(event:MouseEvent):void

  {

  code to place the object at the front *.

  }

  Thank you!

  There are two ways I can think to be coming forward...

  button.addEventListener (MouseEvent.CLICK, showobject);

  function showobject(event:MouseEvent):void

  {

  addChild (objectName);

  or

  setChildIndex (objectName, numChildren-1);

  }

  If objectName is replaced by any instance name you assign to the object

• Symbol of the three discs stacked to the left of the power button on the front of the CPU

  Pavilion p7_1070t CTO desktop PC

  What is the symbol on the left of the power button on the odf before the CPU?  It looks like three stacked discs and a light under the symbol flashes?

  Hello

  It's just a visual indication of when your drive is reading or writing data - so if it flashes quickly this would indicate a lot of hard drive activity, less when the LED flashes slowly.

  Kind regards

  DP - K

• Create new vi by clicking a button on the front panel

  Hello. I'm quite new with Labview.

  I have to use an if statement to activate a button (I don't know if it is possible or not in LabVIEW) then when the button is enabled for the user must click on the button (allows the button say NEXT) to close that vi and open an another vi to a specific address. I have need to record anything the previous VI that I just need to close and open a new one.

  Does anyone know how to activate a button to get the right answer to an if statement first and also how to close and open the new vi by clicking this button.

  Thank you very much.

  I think that the seal will help you much further.  I have documented if necessary.  If you have any other questions, feel free to ask.

  Open Main.vi and run