Legal issues - manual

Similar Questions

• Obtaining a disk image of Vista (legal issues)?

  My girlfriend bought a laptop with Vista Home Premium pre-installed, but it seems that the laptop didn't come with the CD of vista, or she has since lost their. Because I'm not really a Windows person, I would like to know the following:

  (1) where can I find the vista license code? Is glued to the underside of the machine labeled Product Key (and composed of five blocks of 5 alphanumeric characters)?
  (2) can I download a vista from an official source disk image?
  (3) otherwise (I have not found one so far), it is legal to download vista family premium by the way and then use his license code to reinstall it on the same computer?

  Yes.

  The product key/license of Vista is this Sticker with 5 groups of 5 figures (25) stuck to the bottom of the laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  Or borrow a good DVD (not Dell, HP, etc.) Vista.
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Legal issues with Firefox Add-ons

  How can we report an add-on that uses illegal data (such as the licensed data)?
  It's a simple procedure, or we should follow the official legal steps?

  [email protected] address is not just for this purpose, please try to send your comment to amo-editors @... on the contrary

• HP Officejet Pro 8600 paper Premium - Legal Issues

  This printer supports legal communication, and it prints on legal paper but:

  (1) I am unable to get it printing double-sided paper legal?  I thought he did it?

  (2) the album paper Manager (were the printouts) says he's set to A4/Letter but what print legal paper, the document of clusters to the top where is spell.  It seems that this must slide to accommodate legal paper, but I can't figure out how to do this?  The end result is that of legal paper jams their output.

  (3) I had set up the printer so that the Tray 1 (top) letter-size and tray 2 was legal.  Unfortunately, in the order of the printer print on legal paper I had to put the lower shelf as the default tray (it does not automatically detect letter / legal) and once I did that it won't return to letter-size (even by resetting the default to the letter).   The only solution I found was to install the legal on tray 1 and the letter on tray 2.   Is it a software error?

  Thank you...

  Hi, the 8600 is printing double-sided legal impossible.

  

  The 8600 does not automatically detect the type of paper in the tray (s).

• Legal issue of XP Pro activation

  I'm having a problem with XP activation: activation continues to tell me my product key is not valid, but microsoft says that it is valid. I got a new PC built to replace my old pc. Installed and activated Windows XP successfully in February or March... due to call to activate, but it worked. I caught a virus and had to reformat my hard drive. Now I'm trying to activate it everytime told me 'this product key is not permitted. Activation cannot be completed both entered a valid product key. The 25-digit product code must be located at the back of the Windows XP CD... "that is exactly where I get the code. I called six times telephone activation: first call to customer service tells me that it is a valid product key and I should go to the web address (then cut), second call to the 'invalid product key' customer service please go to the Webhttp://tinyurl.com/2vkfhg7 that tells me that I need to activate Windows (no ____), third call to the client code "invalid product" service 800-936-5700. So I call the 800 number gve, them my product key that they prove VALID, which means that I'm having a technical problem (really) and I can try to fix it myself for free or pay at least $59 dollars for tech support (pretty sweet) explaining that XP is more a product of primary support (but we will always give users a rough on its use).

  So here I am trying to understand why this won't work, here is my report ofMicrosoft Genuine Advantage Diagnostic Tool :

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - R8KFY - GKFBR-YG3C6
  The Windows Product Key hash: Q5YHdwYoaDlt1p6 + rDDT48fVldA =
  Windows product ID: 55274-005-5870305-22625
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.0.0.pro
  ID: {AFDC0ECE-1E69-4DE2-99A9-748372DDCC45} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: unknown. Not found adjustment.
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AFDC0ECE-1E69-4DE2-99A9-748372DDCC45}1.9.0027.05.1.2600.2.00010100.0.0.prox 32*-*-*-*-YG3C655274-005-5870305-226255S-1-5-21-602162358-1563985344-839522115the system manufacturer,System Product NameAmerican Megatrends Inc. 1306 20080820 *. + *5EFE34070184807804090409Time(GMT-08:00) Standard Pacific03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13790:ASUSTeK Computer Inc. 14E31: GENUINE C & C INC.
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Any ideas? help... Please... Thank you!

  "jtacken" wrote in message News: a4cdfa48-3316-4cdb-97f9-38f06f5c739b...

  I'm having a problem with XP activation: activation continues to tell me my product key is not valid, but microsoft says that it is valid. I got a new PC built to replace my old pc. Installed and activated Windows XP successfully in February or March... due to call to activate, but it worked. I caught a virus and had to reformat my hard drive. Now I'm trying to activate it everytime told me 'this product key is not permitted. Activation cannot be completed both entered a valid product key. The 25-digit product code must be located at the back of the Windows XP CD... "that is exactly where I get the code. I called six times telephone activation: first call to customer service tells me that it is a valid product key and I should go to the web address (then cut), second call to the 'invalid product key' customer service please go to the Webhttp://tinyurl.com/2vkfhg7 that tells me that I need to activate Windows (no ____), third call to the client code "invalid product" service 800-936-5700. So I call the 800 number gve, them my product key that they prove VALID, which means that I'm having a technical problem (really) and I can try to fix it myself for free or pay at least $59 dollars for tech support (pretty sweet) explaining that XP is more a product of primary support (but we will always give users a rough on its use).

  So here I am trying to understand why this won't work, here is my report ofMicrosoft Genuine Advantage Diagnostic Tool :

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - R8KFY - GKFBR-YG3C6
  The Windows Product Key hash: Q5YHdwYoaDlt1p6 + rDDT48fVldA =
  Windows product ID: 55274-005-5870305-22625
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.0.0.pro
  ID: {AFDC0ECE-1E69-4DE2-99A9-748372DDCC45} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: unknown. Not found adjustment.
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AFDC0ECE-1E69-4DE2-99A9-748372DDCC45}1.9.0027.05.1.2600.2.00010100.0.0.prox 32*-*-*-*-YG3C655274-005-5870305-226255S-1-5-21-602162358-1563985344-839522115the system manufacturer,System Product NameAmerican Megatrends Inc. 1306 20080820 *. + *5EFE34070184807804090409Time(GMT-08:00) Standard Pacific03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13790:ASUSTeK Computer Inc. 14E31: GENUINE C & C INC.
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Any ideas? help... Please... Thank you!

  Your problem is that you have installed with a detail of the disc - and try to activate using an OEM key. its simply won't work.
  You must either use the key supplied with the disc retail, or reinstall using the correct recovery disks or OEM media provided with the machine.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• I intend to give my old computer. I also think giving the accompanying software, including windows xp home edition reinstallation cd. Are there legal issues doing this?

  ......

  NO.
  It would be wise to clean install win xp before donating to ensure that all data has been removed

• Legal notice - change image of banner XP classic logon screen?

  I recently discovered how to change the banner of "the classic logon screen" XP up to the top of a logo of my choice, however, before you deploy this change to all clients in my network, I would like to know if there are legal issues with the removal of the existing "Windows XP" banner. Someone at - it any information on that? Thanks in advance.

  If you don't know what banner I'm talking about, see this image: http://yfrog.com/5nwindowsxpctrlaltdeletelj

  All what you need to do is replace msgina.dll in the folder system32 with a program like reshack (it is safe to use and is free)

  Matt

• Aspire the s7 - 392 fn keys not working do not: airplane mode and switch poster

  Hello

  I read messages on the other fn keys not working do not, but can't find anything about these two (fn + q and fn + e). I just reinstalled windows 8.1 (and spin the dual boot ubuntu) and now these two keys have no effect.

  Does anyone know that drivers are responsible? Or have any other ideas?

  Thank you.

  Yes, if you look in the applications section of our manuals and drivers, you can download the Acer Launch Manager. Good starting point, but I'm not 100% on what software is required for the keystrokes, and not all software can be downloaded (in reason of the royalties and other legal issues).

• How to stop grouping Adobe 'MALWARE' with their updates.

  We must launch a petition to Adobe to stop the McAfee group automatically with each update. Not everyone is tech savvy (including my parents) and I'm sick of helping those who have accidentally install this shit on their machines. If they are unable to stop the group he have at least the box unchecked on the page set up so people can manually check themselves after they read whatever it is if they still want installed. It of bad netiquette and doing business, and it must end now.

  This isn't a good reason for self opt in. There is very little reason to auto opt in anything, especially something unrelated to your software.

  A lot of people do not trust McAfee in particular for many reasons arising from their history of advertising, mediocre ability, wrong size, wrong gear and many other things. Even IF they did a reliable product, flash is too ubiquitous to think that end users do not already have an AV installed.

  Software AV usually don't play well with other AV software, including McAfee and Symantec.

  This also opens the Adobe Flash Installer for Trojans tie so that the portion of McAfee requires a high level of function security. If you think this is a reason for direct downloads, it's not that it would not be a big problem to the Adobe servers target for a feat.

  The latest incarnation of McAfee AV is very buggy and creates its own weird UI with no warning is another very bad question.

  Note that this problem is on top of the already bad issue of the update of flash too often; always use automatic updates is enabled instead of remember the choice of the user; and the additional steps new, horrible to have to go to adobe.com to update while keeping the annoying popup previous installer.

  [mug shot = response to reply comments section]

  Jeromie Clark wrote:

  Thanks for your comments.

  Flash Player is extremely expensive to develop, maintain and distribute.  It requires the effort of a large number of specialized and talented people, and by pushing a single implementation to day consumes approximately 50 petabytes of bandwidth.  To offer Adobe products free bundles represent a necessary cost-recovery mechanism.

  If Adobe had "50 petabytes with a value of bandwidth", they wouldn't need McAfee for advertising revenue they'd already one of the richest companies in the world. Why? Because Google uses only 25 ~ TB of bandwidth, and it would take 2,000 times more than that. Check your knowledge before the representative of your company.

  If you mean that the total amount of data transferred to end users by adobe for an update, then you have another problem, which would be > 1 billion downloaded best!

  If it's so expensive to Adobe to "develop, maintain and distribute" flash drive, maybe Adobe should look to make a few changes:

  • Stop requiring direct downloads (they are irritating and considered dangerous)
    • Deliver via the channels of the torrent/cloud/normal add-on: secure, fast and efficient
  • Rewrite your drive (it's already slow, outdated, bloated, buggy, proven risk security, etc.)
  • Open source (what are you afraid of?) We will steal your crappy code, create a better product in less than a year, know that there are really malware?)

  "bundles represent a necessary cost-recovery mechanism.

  • Explain why you and Oracle are the only two major software providers who do this
  • Is this the reason why you must group an AV program, to mitigate the cost of garbage on the computers of people fed by force?

  To get more technical account users use only your product to avoid legal issues surrounding copyright godawful Adobe Flash there solutions much better flash out there who are in questionable legal territory (although probably safe).

  [/rant]

• Retrieve text messages from old iphone with another carrier and its been reset?

  Is it possible to retrieve text messages from old iphone with another carrier and its been reset? I have an iphone 4 that was with att then I switched to tmobile and I reset it as I was planninging on selligg, but I face some legal issues and I was wondering if it was still possible to be able to retrieve these messages? I also have an iphone 4S that I used after that id like these old messages tmobile too and I am currently usin g an iphone 5 c If anyone knows or can help make em let me know please thanks

  If you have a backup of the 4 from iTunes or iCloud, messages can be in there.

• HP Probook 440 G3: HP Probook 440 G3 sleep instead of shutdown

  When a user chooses stop from the menu of Windows 10, HP Probook 440 G3 is happening in mode 'sleep' rather than stop.  This has been verified in several ways, including a review of logs of system events and of the command

  SystemInfo | find the 'Boot '.

  It is a problem because business critical applications (Mitel Micollab to name one) require a stop every day or they have erratic behavior.

  Laptops are already configured to sleep when the lid is closed and the system is on battery power.  If users do not have another way to make the system sleep.

  Problem occurs on multiple versions of Windows 10 x 64, lately Version 1511 (OS Build 10586.420)

  All windows updates and patches available, including those from HP Support Assistant have been applied.

  stop if the command line is not an option - users are very busy lawyers and paralegals not computer experts.

  The power button was programmed to stop the machine, but users were trained based on previous machines always use the closing of Windows and not the power button.

  Users use some legacy machines that need to be taken out of windows service and not the power button.  Tell your users to use the power button would be a matter of training.

  Our users are specialists of the legal issues criminal and Civil and should not be forced to learn the intricacies of Windows to do their job.

  HP - please provide a fix so that they have been trained since the closing of windows, users can shut down windows.

  A difficulty that has worked for us:

  Update to the latest version of the bios 01.14 SP77161 or later

  HP Recovery Manager updated SoftPaq NUMBER: SP74707

  ESU for Microsoft Windows 10 sp76202 HP

  Note desired power settings, restore default and go back and get back to desired

• What happened to the recovery of the Options software Dfault factory to win 8.

  We recently bought a C50 - B Satellite laptop for one of our boys to use at school (since they decided that the laptop replaces the need for text books) and needed to be implemented. It will be his only machine and it will also use to play games and surf the net. Past experience with his games, he done always something that slows down the system and finally makes it almost unusable, a State that I can't leave because it is necessary for school. I thought I would dualboot, one system for school only and the other for its games so that if its OS is messed up games he can still do his school work on the other OS.

  Microsoft say that, since the OS will be installed on the same computer twice, but that an installation can be run at any time that it does not violate their license agreement, so no problem with legal issues.

  System recovery, in Win7 under "Recovery of Factory Default Software" has three options.
  1 get out-of-box state.
  2 recover without changing the hard drive partitions.
  3. recover a custom size partition. The memory option 2 or 3 allows a 2nd installation of the operating system even though I think as the BCD needed some changes to both work.

  My problem is that the C50 - B comes with Windows 8.1 and the recovery procedure and options have changed. Win 8 / 8.1 seems not to have option 1, or an equivalent, as it says Win 8 s reset is similar to the recovery of Win7s, but this removes the partitions and the existing operating system, so I can't get two operating systems on the computer by using this method.

  Does anyone know a way to dual boot to help to win 8 / 8.1 recovery partition?
  OR is it possible to modify the script to allow options 2 and 3 of Win7?

  Win 7 was not ideal for this, but the deletion of these two options, it is difficult to use other operating systems such as Ubuntu, Linux etc.

  I would like to see the recovery for the other operating systems partition, do not assume that it will be the only OS that requires the user on the machine.

  Help with this will be appreciated.
  Thank you.

  Windows 7 recovery option is different of options of recovery available in 8 Win / Win 8.1 but of course possible to use a dual boot system (Win 7 / Win 8.1) on a laptop computer.

  Here are a few beautiful /TSB FAQ I found on the Web from Toshiba site on the process recovery running Win 8 / Win 8.1

  How to recover a portable device or Tablet from Toshiba with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Windows Recovery 8 & repair
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Steps to install Windows 7 on a unit of Windows 8
  http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

• WinDVD for Toshiba - no function screen Cap?

  Hello

  I just bought myself a Toshiba A200 15I (I think it's the name of the model, or something c. similar in any case) and I'm just starting to get comfortable with it.

  One thing I noticed it's a disappointment is that the version of WinDVD, I had with this laptop is different to the one I'm used to, I've got WinDVD 4.0 on my old laptop and one that came with my new laptop is a specific version of Hitachi (InterVideo WinDVD "Toshiba").

  One thing that I really like WinDVD on my old laptop is now that he allows me to take screenshots of the video/DVD files I play on it but I can't find any mention of a feature of Cape screen on this version of Hitachi of it. After a while, I found the help section and searched for screenshot, but nothing helped, so im guessing he is not there (?)

  If Yes, I checked and managed to find the CD for my old laptop that contains WinDVD 4.0 but I'm not sure if it would be safe to uninstall the current version of Hitachi and try installing that, as the CD of WinDVD 4.0 is specially for my old laptop Fujitsu Siemens (it is one of the CD that came with the laptop and FSC (Fujitsu Siemens Computers) wrote next to the version number) as it is a few years ive no idea if it would be at all compatible with Vista and my new laptop obv. a Vista (Home Premium). I don't know if it would be a good idea to have installed either both, we could confuse the system with two WinDVDs installed on a computer (?).

  Am I right in thinking the Hitachi program WinDVD don't let me do / select screenshots? If Yes, what is the best thing to do, so I have a program that will allow me to quickly and easily get caps of video files and DVD... is there a known Vista friendly program that would allow me to do this as an alternative? or WinDVD 4.0 works well and it would be safe for me to maybe try to install that... I don't want to risk of confusion between the system and/or uninstall Vista friendly program to finish with another who does not really I think. I checked to see if the MovieMaker version that comes with Vista, would allow me to do it, but it doesn't seem to have an option of course screen too, even if I don't check this program in pretty good detail so I could be wrong, but when the old icon of camera used to be, I did not see it... has this option been removed these programs due to legal issues or something perhaps? I never heard of something like this...

  Any help is much appreciated; Thank you!

  Edit:-I just noticed it says "InterVideo WinDVD for Toshiba 8.0" If that helps...

  Post edited by: IzzyS

  Why Don t you use another program to make the screenshots like VLC or media player classic? I mean, WinDVD is ok, but why not use more professional and perhaps more opensource and not programs of some manufacturer changed without feature for users who need a?

  I suggest you look at VLC since it s a good tool and very useful. Maybe you can find more applications in that direction.

  Welcome them

• P50 - easier to test the brightness?

  basic question, what would be the easiest (for example less expensive) for me to measure the brightness of my P50 Panel? (btw, I have not found a way to identify the FAB of the Panel, when people quote is Sharp because they opened the chasis and saw a label?)

  Comment to Moderator: The model is added to the object for clarity.

  I forgot to say that the colorimeter must also be adapted to the types of LED backlight. Old designed for CRT or CCFL types don't work reliably, and they can bring up the bad light output.

  It is always interesting to complain, if that bothers you. I don't know what really are the requirements of Lenovo, but for legal issues that they better test according to the manufacturer tolerances and methods of measurement. I don't have the technical details of the Panel from Sharp, but the LG 15.6 "screen LP156UD1-SPA2 4K can be found on the net. The typical brightness is 300 nits. Guaranteed minimum is 255 nits. And those values are still based on an average of 5 samples, measured perpendicular to the screen using a spectrophotometer placed 50 cm from distance.

  The reason why the Sharp 4 K Panel looks dark is due to the kind of absurd angles, vision, so no perpendicular with your eyes everything loses brightness. But I don't think that there is no requirement for the severity of this anywhere. Except that the angles of vision is defined as the angle where the contrast rate of 10:1.

• The Globals and Globals station brought in the sequential model of the file

  Hello

  I create sample files to illustrate the use of the station globals and globals using TestStand 4.2, model batch file.  I was assuming that station overall value would be persistent to the station and file global values are persisted to the file (as long as the file is not deleted, the value will remain).  But, after the executions of couple, I found that I'm wrong.

  He's looking to me that globals file, the value reset for each new execution.  I would like to ask if this is a correct behavior?  If it is correct, I can say that: because each run contains the new instance of the file, so at the beginning again, new copy of the globals file are created.  (I'm borrowing the idea of the model of batch execution logic, but for my example, I use only the sequential model).

  In addition to reading the other posts, for globals station, value is not persistent until a file Save command issued manually.  How to deliver this command?  And, is there a similar command for globals file?

  Thank you.

  Peggy

  Hello

  When teststand is closed the StationGlobals file is updated automatically, you don't have to do anything.

  For FileGlobals, there is a static version, that you create at the time of editing, and there is a version of the runtime. When you change the values during execution, these are not kept when execution is completed. So if you want to maintain values of execution you will also change the static values and also save the file in the sequence.

  There are examples in this forum to do just that.

  Hope this helps

  Concerning

  Ray Farmer