HP Officejet Pro 8600 paper Premium - Legal Issues

Similar Questions

• OfficeJet pro 8600 paper tray slides not well

  OfficeJet Pro 8600, Vista.   Newly purchased.

  It is about the paper tray (and there's only a single tray for the Pro model).

  It is not related to change the paper size, or how to close the tray when in legal size I've seen in a post.

  This tray is attached directly on the surface of the table. When you open and push to close, he rubs too on this surface and is very difficult to open or close.  It will just slip off as my other hp printers.  The friction is causing this frustration.   I have to actually lift the printer with my other hand to remove the bin to.

  Anyone else having this?  How to remedy?

  What a shame of a problem.  Looks like a nice printer.

  Problem solved.  The table of this printer on a material cover.  I placed the printer elsewhere with hard and soft surface.  This seems to work better.  However, not the best slides inside and out, but a lot better.

  conclusion: do not throw a printer on any material!

  Sorry for the inconvenience.

  Solved.

• HP Officejet Pro 8600 Plus Scan quality issue

  Hello

  I just set up my HP Officejet Pro 8600 Plus, and everything seems to work properly.  I am really disappointed by the quality of the images so, so I thought I'd see if anyone has experienced the same problem?

  The scanned images are very dynamic, but are too.  Detail is lost in the scan either because the brightness, or because the scanner is not properly using the resolution I have him ask to scan (600 dpi).  I have tried various different brightness and contrast settings in the scan dialog, nothing helps.  Printing HP and Scan Doctor reported no problem.  Increase the resolution of scanning on the 8600 is not helped either.

  I joined a segment of an image of the 8600 and a lot cheaper all-in-one I expected to replace, a canon mp630.  I have bought the 8600 because the scanner component had good reviews, but based on my experience, that I'm starting to have my doubts!

  Please let me know if you think there's nothing I can do to improve the quality of the scans?

  I use Windows 7 Ultimate, 64-bit.

  Thank you

  Pete

  8600 scan 600 dpi (Note lack of paper grain)

  

  Canon MP630, 600 dpi (capture of paper grain, wash the details)

  

  Unfortunately, I must point out that the replacement was no better.  It's a real shame, old flat scanner HP I was replacing with the ACM was high quality, but the Pro 8600 scanner was simply not enough good.

  Ultimately I exchanged for another manufacturer MFP that produces a large part analysis better (even if printing is not as good).

  I had much rather have paid more for a higher quality scan on the HP, but this option is not available to me, which is a shame!  On the 8600 Pro scan color reproduction was great, but there not only to capture the details.

  You can adjust for color problems in the software, but if the detail is not captured, you can't put it in!

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• OfficeJet Pro 8600 Plus touch screen issue

  Hello

  I have an officejet pro 8600 and the touch screen has a very annoying attribute. The touchscreen overlay coincide with the screen itself. On the left side, the overlay is in the correct position, but when you move to the right the overlay gets more and more mismatch of whats on the screen. For example, when the screen is showing a keyboard it is indeed impossible to type a '0' (zero) as 1 mm from the right side of the overlay gives a "9".

  I used to have a windows device THIS old iPaq you rebooted it asked you at each of the corners touch in turn so that he could align the screen with the touch screen overlay. The more than 8600 there any possibility to align the overlay, perhaps with a downloadable application, or am I stuck with not be able to use certain bits of functionality on the printer because the overlay align properly?

  Stuart Watton

  Sorry, but this printer does not have the opportunity to download an application, or align the touch screen. It is more of a hardware issue, and you must contact the Support HP (1800-474-6836). I hope this helps.

• OfficeJet Pro 8600 - paper format and copy

  I have an original document which is 216 x 330mm (8.5 x 13 in) and the paper of the same size. I want to copy the document to its original on the document size. When I try this, thumbs down, or so of the original are not copied. Now, for reasons known only to HP, the "Paper size" menu (on the printer) in the copy options gives a very limited number of possible paper sizes, and 8.5 x 13 is not one of them. From there, I understand:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/unable-to-copy-legal-size-on-HP7610/m-p/297...

  that replace the region of the printer setting affects which paper sizes are available under the menu copy and this seems to be true, but I tried a lot of different countries and none of them include 8.5 x 13.

  My only option was to scan the document and print it then my PC. Note that when you print from the PC the 8.5 x 13 size is available, and if I get the result I want - an enlarged copy on paper of the same size. However, it's much slower just made a copy of the printer, and if I had to copy a large number of documents, it would be really possible.

  So is there a solution to this? I for the life of me don't understand why everyone thought it would be a good idea to limit considerably the range of sizes available destination when copying. What would be really nice would be to have all of the available formats, the same list see you if you go to 'Print Options' on the PC, the printer, what that is the region, and if this list is deemed to be a bit heavy so to choose the settings by default, perhaps in an 'Advanced' options menu

  Hi Bell,

  I cut paper format legal until Folio and tested on a 8600 JO.

  I found that the setting of the copy to legal size and feed the page via the ADF has copied the entire page on Folio paper I created.

  There is no errors if the printer did not bother the paper more short.

• HP Officejett Pro 8600: paper jam

  I have a paper jam and I cannot fix it after viewing the video of HP.  The paper is visible from the front and after removal of the duplexer.  The book seems to be tightly wound around the roller.  I can't go out fron the front and it's wrapper around the roll, when I look at the back.  Any suggestions?

  Dottie

  Hey @Dottie11,

  I see that you have some problems with a paper jam in your 8600 e-all-in-one printer Officejet. I can help you with that, but it is not a lot that can be done in this situation.

  If the printer is still under warranty, I suggest to contact the HP Support by clicking on this link and fill out the form below.

  If the printer is out of warranty, the best I can do is suggest more strength or cutting paper with scissors. Those who are not HP recommended troubleshooting steps and HP can not guaranteed that they will help with the jam, but it's the best I can do.

  Please let me know the results after following the above. If you clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8600: paper feeding problems

  Help!   My printer has all of a sudden decides to try to feed a bunch of paper at the same time, ruining the leaves.  May 6-12 pages.

  I don't know the terminology to search for this problem.  There are times when paper changes (for example the new color), but not always.  Hate waste, hate to lose the County. Should I clean something?

  Welcome to the HP community @macandsons!

  I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to help. I would like to see you link below and try the steps in the order for that matter. Generally a good cleaning roll will help this type of concern. If you still find the printer pull in several sheets of paper, then I recommend finally call phone support to talk of a replacement printer.

  More than one Page at a time feeds through the printer

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• HP Officejet Pro 8600 Fax (CM749a) Email problem n911a

  Hello!

  I use a HP Officejet 8600 aio n911a (CM749a) connected to a network via ethernet.

  My fax machine is currently set to 'Fax to Network Folder', but I would like to change this to 'Fax to Email. I went to the Fax tab and clicked on the HP digital Fax Wizard to try to change the 'Fax to Network Folder' to 'Fax to Email' but I cannot find anywhere how to do this.

  It only allows me to disable the HP digital fax or fax to network folder.

  I don't know if this helps, but I have configured alerts to e-mail through EWS/settings/Email Alerts, which seems to work fine. If the printer can send emails.

  I would be grateful for your help.

  Kind regards

  Osman.

  Hi Osman,

  The HP Officejet Pro 8600 (N911a) support only the digital repository (Scan or E-mail) to a network folder.

  Only the Officejet Pro 8600 Plus / Premium models provide the specific functionality.

  You can find this information in the product specifications:

  Digital sending features
      Scan-to Folder; Fax Archive to Folderhttp://shopping.hp.com/en_US/home-office/-/products/Printers/HP-Officejet-Pro/CM749A?HP-Officejet-Pro-8600-e-All-in-One-Printer-N911a&jumpid=oc_r1002_usen_c-001_r0001&lang=en&cc=us
  

  Shlomi

• OfficeJet Pro 8600 Wifi question

  My company delivered my new of Officejet Pro 8600 with locked out wireless capability... I guess that they do not want printing wireless at the office, but I use this printer home and print to it my personal devices wireless... any advice on how to re-engage the wireless features?

  Your company would mind if the printer has been completely reset?  I'm guessing that they disables wireless and also put a password on the printer, so you cannot turn it back on.  I would call your business or if you know that you can't find in trouble do complete a reset on the printer.

  How to reset the printer is provided here.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/how-to-reset-OfficeJet-Pro-8600-plus-premium-to-factory-default/TD-p/1094005

• New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?

  I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600.  Can I do this?

  The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.

  * The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.

  Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd.  The current price is $79.99 usd.

• OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

  OfficeJet Pro 8600 Premium, Windows 7

  How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

  Thank you!

  Greg

  Hi Greg,.

  At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

  1 Ctrl + p to open the print dialog window.

  2 Select the printer of desire and click the preference.

  3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

  See you soon,.

  Kimu

• Do not feed paper for incoming faxes, officejet pro 8600 premium

  I have a HP Officejet Pro 8600 Premium.  Recently I started having a problem with my incoming faxes.  An incoming fax comes through, and when it will feed the paper to print, it shows on the screen that it is paper.  He goes through the process of trying to feed paper through and makes the sounds, it does usually when I am out of paper in the feeder, but I'm not.  It prints and copies fine.  Just having this problem with the incoming fax is not able to print.  Help!

  Too bad!  I found the problem.  This is a printer 2 bins and sort my incoming faxes were trying to feed from the 2nd drawer (which was empty).  I have no idea how the setting has been changed, or how to restore it, but I'm not worried about it, now that I know what it is.  I was able to print any faxes that never came through (all 24 of them, Ouch!)

  Thank you!

• How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

  How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

  Hello

  The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

  Save and close the application.

  Now you can scan in legal.

  Note:

  You can also create your own settings for scanning HP scanning parameters.

  Good impression

  Evelyne