Length of time line

Similar Questions

• Error compiling FPGA-61332: the length of a line to < "file.vhdl" > is too long for xilinx 10.1. Length: < length > Max Length: 4150

  Hello

  When compiling a fairly basic FPGA VI, I get the following error:

  61332 error occurred in niFpgaCompileWorker_ProcessStatusPipe.vi:1<><>

  Possible reasons:

  LabVIEW FPGA: An unexpected error occurred with the build tools. You try to compile the FPGA VI again could solve the problem.

  The length of a line in "NiFpgaAG_0000002e_WhileLoop.vhd" is too long for xilinx 10.1. Length: 32845 Max length: 4150

  Departure time: 17:22:06
  End time: 17:22:12
  Total time: 00:00:06

  Apparently, the vhdl code generator OR forgot to add some CR + LF in the intermediate files. How to work around this bug?

  Kind regards

  Lukas

  Hi Lukas.

  When LabVIEW compiles a VI, the VI is converted into virtual hard disk to be compiled into a file bit by Xilinx.  As you have already understood, this error indicates that a line of code vhd had a length of 32 845 characters, which exceeds the maximum length of 4150 characters for the Xilinx 10.1.

  Although 32 845 characters is very long, it is possible that this is due to the codification of LabVIEW rather than a bug. Some common causes of this problem include large enums, a matrix, or clusters in the code.  Please check in your code.  If you have no luck, please attach a screenshot of the code.  I hope this helps!

  Kind regards

  Dayna P.

  Technical sales engineer

  National Instruments

• Using the button to increase the length of the line (an easy!)

  Hi I want to set a script to a button which will increase the length of a line (movieclip) by x amount each time.

  I tried to use this:

  on {(press)

  this.line._xscale = this.line._xscale + 5

  }

  .. that work, but also scales upward the value y of the line. How can I A) lock one end of the line in position and B) stop the value y of the line?

  Thank you! R.

  It is an alignment problem.

  If you go into the symbol of the line, select the line and line up at the high point and left (so the collimator is in the upper left corner of the line) the top/left corner of the line will always be in the same place, when you change its width.

• Length of command line with dynamic text

  Hello
  
  Does anyone know how to control the length of a line with a dynamic text input?
  
  I have two buttons, which increases the value of a dynamic text of 1 every time that it is pressed and another which decreases. The display shows the number that results. I want to draw a line that increases or decreases in length with that number.
  
  Any ideas?
  
  Thank you!

  Well, you could take a text field value and multiply it by a constant for the length of your line. Once you have this number, you can draw the line dynamically using the drawing API or change the width of a movieclip with a line in...

  Let's say you have a movieclip with an instance name of line_mc and your dynamic text field has an instance name of myTextField, you can change the width of the line_mc like this:

  line_mc._width = number (myTextField.text) * 10;

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• iMovie expand/extend/stretch the time line

  Hello

  I am learning to use iMovie and want to magnify or to stretch the horizontal timeline so it's easier to see more time.  Now, I don't want to change the duration of a clip - just the scale that the video may be brought against - the time line.  Is this possible with iMovie?

  David

  Of course you can do it. Under the Viewer is a slider that allows you to extend the timeline. Also, click settings and you will see a slider to change the size of the clamp.

• How to test the length of the line

  Hi all

  I want to test the length of the line, the next photo, I use the wizard of vision and no to do, but I can't get the result, any help is very grateful.

  Hi longzeng,

  Are you still looking for a solution to this problem. I think that the best method of Vision Assistant will be on the threshold of the image and then perform an analysis of the particles on the result. The stage of analysis of the particles will have a very large selection of outputs possible. I picked the ones that will probably be the most interest in Vision Assistant script attached below. You may need to make some adjustments to get reliable and consistent performance of the thresholding step, but I believe that this will happen the feature you're looking for.

  Please let me know if you have any questions on this.

  Thank you

• Windows Movie Maker 2, 6-How do I change the length of time of the image

  Easily change the time

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• adjust the length of time to display Desktop photo

  How to set the length of time on my computer's desktop picture? This is a new computer.

  Hello

  Each tiny pixel has a life, he will die sooner if she had to work more time. If you want to use slideshows at home, a picture frame may be an option, it's cheaper and you can play independently.

  Kind regards.

• How can I measure the length of the lines written with the Paint program?

  I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

  Hi Ralph,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the name of the paint program?

  2 have you tried to install the software of paint in Windows 7?

  3. are you able to install it? If this is not the case, do you have an error code or message?

  4. in what version of Windows was fine paint software work?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• It is not possible to burn my playlist without windows knowing the length of time?

  All my music transferred has lengths of time attached to their file and I can't seem to burn the songs without windows knowing the length of time. Adjust the size of the file at a time? I have a ton of music on the program without recognized time and I wouldn't have to do this again!

  All my music transferred has lengths of time attached to their file and I can't seem to burn the songs without windows knowing the length of time. Adjust the size of the file at a time? I have a ton of music on the program without recognized time and I wouldn't have to do this again!

  What burning software do you use?

• No video just audio when you place them on my time line

  I've been editing with adobe pro CC for awhile first and only today, after upgrading my CC from 9.0 to 10 I had a problem where I have the audio when you put video clips on my time line. For some reason any its not bringing don't not the full file in. I played video clips on another program and they work and its fine and when you drag them in the first pro library, they have the preview and I am able to do scroll the video ok it's just when you place on the time line its not bringing don't not the video with her.

  In looking at some of the clips in the project Panel, they are not showing the icon that indicates there is an audio file on the clip.

  On this line at the top of the page, the miniature of a clip from gopro, central element has no icon in the lower right corner. This is just the video as much as PrPro can see.

  The good article, the tile with two icons below on the right... these icons are first that it is used on a sequence (hovering above him and he'll even tell you how much time it is used) and the second icon, it's that it has linked audio.

  So... is not audio clips, or the way in which it has been imported to the PrPro is not 'see' the audio file linked... or the database/cache is screwed upward. I think that these are the three main options.

  So... using MediaInfo to "see what is inside your media" or play them elsewhere, did sound?

  If so, how do import you them into PrPro?

  Can you make a new project, import the clips and have his "appear" with the clip?

  Neil

• Hello. I do not seem to have 'create frames from layers' option of time line.

  Hi, where can I find the framework for the creation of the layer option in the time line?

  

  First, you will need to click on the big button in the middle of the timeline, so that Photoshop knows that you want the animation to image.

• How to move audio files of the program in the time line?

  All of a sudden I can't move audio files of the program in the time line - I read that Adobe said in previous forums click with the right button on the A1, but nothing in this discussion has helped me solve this problem. It was working before. I am a beginner user, so I could be missing something really obvious. My time scale is in blue. I noticed in some tutorial videos that it was yellow.

  Hi lauranoel,

  The reason is due to a bug, explained here: FAQ: why no audio or video will not at the track where I drop?

  Next time, just remove and In or Out to mark, and then drag the clip.

  Thank you

  Kevin

• Preview only works if the time line is not visible

  I'm having a problem with preview.  My computer plays smoothly if the time line for this model is not visible.  I have to hit play then click the Render what tab or close the window of time line all together.   Why is this happening?

  Assuming you are using El Capitan, Dave is right. It is a known problem. It is listed on this page and a few other places as well. You have found a workaround. Another workaround solution found by the mofxtv user (in this thread) is docked to another court under your control panel mounting.

  Like this:

  

  Some people use other panels that they use less often.