Preview only works if the time line is not visible

Similar Questions

• Scan of a file only works on the first line

  Hello

  I'm new to Labview (see 8.6) and I'm running on this problem.

  I use the Scan of a file to get a certain amount of information for the installation of test.txt.  The data of the file looks like this:

  AAA 1

  BBB 2

  REC 3

  I noticed that the Scan of the file works for only the first line.  Trying to get data that are not in the first line results in an error 85.

  Any ideas? Thank you

  

  It's all in what the scan of the file reads, and what is the next cgaracter in the file.

  Your first analysis of the file reads up to but NOT including the first newline in the file.

  The second read readings where the first reading was arrested and is expected to see 'B' as the next character, but sees the new line instead, and if the analysis fails. You must specify second reading formatted to await the return line.

  You can do this by making the FIRST character of the format string space, that will tell it to expect a number any of charaters 'white space '.

  Yo can indeed put a space at the beginning of the format string in your first analysis of the file and it will match with zero white space characters before you see the AAA. By doing this he also tolerate to see the spaces and tabs before your AAA or BBB identifiers.

  Rod.

• Rendering on the time line does not

  I have an iMac running the latest version of OS X Yosemite - I always used up where iMovie for my editing.

  But just bought a new Panasonic SC-V550 Handycam and learn how to use. -J' shot the video with the original camera settings I imported into first items 12 and who produced a reporting over video like AVCHD/file icon then, I went to post it on my computer and I am unable recall in what format - but was not very good - then I found an option that says something along the lines of output or to play on an Apple Mac who gave me the result that I was looking for.

  I shot a few more vdeo on the camera and changed the initial camera in 1080/50 p settings and downloaded again to the first 12 items - however when I click on the icon to Render - I no longer get the clip to render - nothing is going - I have tried click in the Menu bar under the line time but has no effect.

  
  

  I tried to publish, but could find more no option for Apple Mac and all the results are released in weird icons that wouldn't open and run in Quicktime or MOV etc.
  

  Some kind of video I shot my Pansonic Handycam that is not in a format supported by elements of first or I have a problem with the program elements of Prime Minister?

  Any help and suggestions would be appreciated

  Kidson

  If you have not already the case, please update your 12 items first the 12.1 update using Help Menu/setting of a project open.

  In regards to your import of the 1080p50, I suspect you can do the rendering of chronology because it doesn't have to be returned to get the best

  possible preview as indicated by one without color of the line above the timeline of content... you don't see no coloured line line there or orange?

  When you click the button made above the timeline, do you get the video playback in Edit area monitor instead of your rendered Timeline?

  In addition, the gray tabs on the work area bar set to expand on the content of the calendar that you want to make?

  

  Restore the timeline is for preview purposes only. No line color or the green line is the program telling you that you

  have the best possible overview and that there is no rendering necessary or available. The orange line is the program by saying that

  You must make this content to get the best possible overview for what you see and hear in the editing area monitor.

  With respect to the export of your question part, I think you need to think more about the correct export settings-

  If you have a 1080p50 project, then you can consider an export of AVCHD.mp4. Please see

  Publish + share

  Computer

  AVCHD

  Presets = MP4 H.264 1920 x 1080 p 25 if you are working in a PAL configuration. Then you go into this preset in the Advanced button/video

  Tab and customize which preset to get MP4 H.264 1920 x 1080 p 50. Look under Advanced tab button and video export settings, it would be

  look like

  

  Please review and consider. If any questions or need clarification, please ask. We will follow

  for your follow-up.

  Thank you.

  RTA

• for my HP pavilion's fingerprint sensor only works at the initial log in not any other time

  I used to have my fingerpt put in place for all my accounts that require a password to connect.  It has stopped working, except on the first connection.  I don't know how to get this feature.

  And... my keys stick but only on some programs.

  better to go to a link of Mozila Firefox browser, you're not the only person who has experienced problems with IE... and this isn't the only issue that IE got...

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• LabVIEW 2013 executable only works on the development machine?

  Hi all

  I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Explorer in installing labview nessary drivers and run the engine of time without problems. Now, I created a new test with Labview 2013 program and I can not get my new test .exe application to run on the target computer. Has anyone seen this kind of problem before?  Any help will be appreciated.

  Thank you

  
  

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• How to move audio files of the program in the time line?

  All of a sudden I can't move audio files of the program in the time line - I read that Adobe said in previous forums click with the right button on the A1, but nothing in this discussion has helped me solve this problem. It was working before. I am a beginner user, so I could be missing something really obvious. My time scale is in blue. I noticed in some tutorial videos that it was yellow.

  Hi lauranoel,

  The reason is due to a bug, explained here: FAQ: why no audio or video will not at the track where I drop?

  Next time, just remove and In or Out to mark, and then drag the clip.

  Thank you

  Kevin

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• iMovie expand/extend/stretch the time line

  Hello

  I am learning to use iMovie and want to magnify or to stretch the horizontal timeline so it's easier to see more time.  Now, I don't want to change the duration of a clip - just the scale that the video may be brought against - the time line.  Is this possible with iMovie?

  David

  Of course you can do it. Under the Viewer is a slider that allows you to extend the timeline. Also, click settings and you will see a slider to change the size of the clamp.

• Tecra A9: How I get saved keys FN-esse to work all the time?

  How can I get my saved keys FN-esse to work all the time?

  It is without having to use the Toshiba Assist button to bring up the Fn-esse chart on my desk?

  Hi Cameillia

  Please excuse my question, but what do you do exactly?
  You want to use the FN + F1 - F9 button functionality without using the FN key?

  Sorry, but I think that it is not possible

  But if you use Vista OS, then you can use the mouse cursor and might point up, display area and could activate the Vista FlashCards.
  The FlashCards support the same functionality as the use of the keys FN + F1 - F9

  Concerning

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.