Lenovo care button not lit in Win7

Hello

I have a problem with my SL500. After the upgrade to Win7 lenovo care button is not more informed. However, the button works. When you press the button of the ThinkVantage Toolbox is underway.

I already tried to install the WinXP driver, but it does not work.

Someone at - it an idea of what to do to get the button lights up again?

Thank you

Hello

The solution that worked for me, is that I have installed "Lenovo Productivity Center". The link below:

http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-61432

Tell me if it works well for you too.

Tags: ThinkPad Notebooks

Similar Questions

  • Lenovo Care button + F11 doesn't work do not

    Hello.

    I have a 3000 N200 that I just replaced the HARD drive on.  I've used Norton Ghost to clone the old drive to the new, and there are a few problems to get XP to start later.  I found a few tips elsewhere that said I have to operate the system upward with an XP installation disc and Run fixmbr in the recovery console, which did not work because the XP installation couldn't find any HARD drive - although it is properly parsed by the BIOS.  Then I tried to boot from a W98 boot disk and running fdisk/mbr. He finds the HARD drive, but still no joy.  Then I used W98 fdisk to look at the drive and discovered that the service partition showed that the partition is active then I used fdisk to set the XP partition active.  Who has worked; I can boot XP now without problem.  However, if I press the Lenovo Care button, I get the option but screen by selecting F11 does not the system go into recovery mode.  After a few seconds it starts right in XP.  I was wondering if the W98 fdisk/mbr crushed something specific Lenovo in the mbr, which is the cause to happen and if there is a way to get the service back 'just in case '.

    TIA

    There are two options on the diskette; one, I think, he said "try this first" and the other will recognize the mbr as non-Lenovo mbr. Have you tried the first option first, then the second option?

    Otherwise, I don't know, maybe it's that the ghosts didn't give something correctly? Did you use the switch of the ib in Ghost?

    If you search the forum for "ib switch" (with ""), you should find plenty of information relevant If it's a review.

    Edit; involuntary smiley corrected

  • Lenovo Care button - FIXED



  • Lenovo Care

    My 3000 N200 laptop was recently hit by a bad virus. I had removed it, but the software Lenovo Care has become corrupted. Now, when I click on any subject of Lenovo Care (such as my system update) I get an error message: "the application could not initialize properly (0xc0000135). Click OK to close the application. "This computer is a little more than a year and is no longer under warranty. Where and how can I download new software from Lenovo Care?

    Thanks in advance to anyone who can receive assistance or advice.

    MDL

    Hi MDL.

    Welcome to Lenovo Forum!

    I'm sorry to know that your computer has been infected by the virus. So I guess that this is thie pilot looking for the Lenovo Care button.

    Lenovo Care Pack for Windows Vista 32-bit and 64-bit, XP

    Hope everything goes well after this installation. Keep us informed

    See you soon,.

    Cleo

  • the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

    Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

    It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

    See page 47 of the owner's manual

    http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

  • N500 Vista and Lenovo rescue and recovery Care do not backup

    I would use Lenovo Care - Rescue and Recovery for backup system on DVD. But R & R cannot do, and I don't know why. What is happen? I see that no stop window with the message "a backup on your system is underway" but progress are always 0%. I made the backup several weeks - then backup was corectly. Unfortunately now I have a problem with her.

    my laptop is lenovo n500 and Vista 32

    I solved problem myself in new R & R 4.21 instalation

  • Qosmio F50 - 10K - multimedia keys are not lit

    According to my topic

    "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

    I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

    In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

    Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

    Hi Jwrath,

    I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Remove the VAP, restart the computer and install the new VAP software.

    In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

  • Control Panel more HP Officejet Pro 8600 not lit and will not work

    Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

    Hi kwhofms,

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

  • Songs by repeating the same if the repetition is not lit

    Hey guys, I'm new to this forum and I have a problem. My e260 continues to repeat the song even if the repetition is not lit. usually I could push the button before jumping on the right side and he would return to the menu music (one that has options, the artist, album etc...)

    any help here?

    Access songs (music > songs) and look at the alphabetical list.  At this level, you see if all the titles appear two times.  I had this happen when you transfer an album to the microSD card, then swap to another player who has the same album in the internal memory.  The songs on the map will display a small map icon next to them.

    If you transfer a track in MSC mode, then back to PSG, you have duplicates, since from the PC, you will not see both modes at the same time.

    Finally, if you use audio formats or codecs, lists the two versions of the song.  For example, I have FLAC a MP3 copy, as well as a copy of a song in memory (the e200 has not been granted ability FLAC, but the same thing will happen if we have a copy the other MP3 and WMA).

    Bob

  • Lenovo care blue LED

    Anyone know how to disable the Lenovo Care blue LED by the volume buttons?

    I really blue LED hatred.

    Here's how it stops for the X 300.  See if there's something similar for the SL series.

    X 300 blue light special

  • HP 14 d037TU drivers do not work for WIN7 64 bit

    Hello

    Please help me solve the problem. HP 14 d037TU drivers do not work for WIN7 64 bit as below. I have try all means possible to install WIN7 64 bit player but no luck. I assume that the reader has not been certified for WIN7 64 bit.

    HP, it is not accepted as HP is one of the famous brand laptop with cart and incomplete product on the market.

    Please help to fix this.

    Hello:

    I just found the Holy Grail.

    Here is the link for the usb 3.0 driver, you need to know.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3467 & DwnldID = 23734 & Keyword = USB + 3.0 & lang = eng

  • Satellite Pro L10 - wireless network card is not detected in Win7

    Hello

    I have a dual boot with XP and Win7 Pro.

    If I install the wireless driver from the download on XP site, no problem.

    I tried the same procedure using the download wireless driver on the partition Win7 using a) driver XP b) driver Vista & c) the Vista driver in compatibility mode. Nothing worked and it is even not a yellow exclamation in Device Manager, so the wireless card point don't has not recognized at all.

    Same problem with Ubuntu Linux.

    In XP, it is recognized as "INPROCOMM IPN2220 Wireless Lan Card".

    Any ideas?

    The entry in Device Manager is right and so must be included in Windows XP Home edition.
    This old model of laptop is not supported for Win7 and on the download section Toshiba WLAN I cant find driver for Intel PRO/Wireless 2200 WIRELESS network card.
    Googling around, I see many people have the same problem on different models of old laptops.

    Have you tried to find the driver Googling autour?

  • Want to 750-114: 10 Start button not working not properly

    When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

    Don2498

    Hello;

    Let me welcome you on the HP forums!

    I read your post on the button start Win10 is no longer working and I wanted to help.

    People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

    Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

    All what I can say is that you work through this thread and hopefully, any of the fixes will work.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Note K5 Lenovo VIBE does not detect device Bluetooth Jabra

    Hello

    It's disappointing to start with. Less than 24 hours since I got my hands on the new Lenovo VIBE K5 Note.

    With long journeys to work and given the connectivity bluetooth with the phone is an essential feature to have for me. It worked very well with my previous Samsung phone. However, the same bluetooth device Jabra is getting not even detected in the new Lenovo VIBE K5 Note.

    Please suggest a solution as soon as possible.

    Waiting for a quick solution and intervention.

    Tejas Jani

    It's weird... I used many devices different bluetooth, including headphones and stereo speakers. A connected with bluetooth BMW and mercedes. Sometimes look a little longer and matching is always a concern on ANY bluetooth system.

    But once it is coupled his uber fast. What rom are you on? Already point Marshmallow?

    Is the problem still not solved? You reassign your jabra to sail again?

  • 36795MU Lenovo Thinkpad 2 not 3G

    Lenovo Thinkpad2 36795MU not detected

    Bought less than a month ago

    Updated to 8.1 windows using windows update

    Inserted SIM card on a regular basis but I cannot detect any 3G network, I'm not from the United States

    Modem driver Ericsson and Sierra tried downloaded from thinkpad 2 page of support but without success

    OK, 3679-5MU model doesn't have a mounted WWAN card. The specifications for the different models are listed in documents PSREF: http://www.lenovo.com/psref/

Maybe you are looking for