Lenovo Care

Similar Questions

• Lenovo care button not lit in Win7

  Hello

  I have a problem with my SL500. After the upgrade to Win7 lenovo care button is not more informed. However, the button works. When you press the button of the ThinkVantage Toolbox is underway.

  I already tried to install the WinXP driver, but it does not work.

  Someone at - it an idea of what to do to get the button lights up again?

  Thank you

  Hello

  The solution that worked for me, is that I have installed "Lenovo Productivity Center". The link below:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-61432

  Tell me if it works well for you too.

• Lenovo care blue LED

  Anyone know how to disable the Lenovo Care blue LED by the volume buttons?

  I really blue LED hatred.

  Here's how it stops for the X 300.  See if there's something similar for the SL series.

  X 300 blue light special

• Lenovo Care button + F11 doesn't work do not

  Hello.

  I have a 3000 N200 that I just replaced the HARD drive on.  I've used Norton Ghost to clone the old drive to the new, and there are a few problems to get XP to start later.  I found a few tips elsewhere that said I have to operate the system upward with an XP installation disc and Run fixmbr in the recovery console, which did not work because the XP installation couldn't find any HARD drive - although it is properly parsed by the BIOS.  Then I tried to boot from a W98 boot disk and running fdisk/mbr. He finds the HARD drive, but still no joy.  Then I used W98 fdisk to look at the drive and discovered that the service partition showed that the partition is active then I used fdisk to set the XP partition active.  Who has worked; I can boot XP now without problem.  However, if I press the Lenovo Care button, I get the option but screen by selecting F11 does not the system go into recovery mode.  After a few seconds it starts right in XP.  I was wondering if the W98 fdisk/mbr crushed something specific Lenovo in the mbr, which is the cause to happen and if there is a way to get the service back 'just in case '.

  TIA

  There are two options on the diskette; one, I think, he said "try this first" and the other will recognize the mbr as non-Lenovo mbr. Have you tried the first option first, then the second option?

  Otherwise, I don't know, maybe it's that the ghosts didn't give something correctly? Did you use the switch of the ib in Ghost?

  If you search the forum for "ib switch" (with ""), you should find plenty of information relevant If it's a review.

  Edit; involuntary smiley corrected

• Lenovo Care button - FIXED

  
  
  

• Button Care on SL500 Lenovo

  When I press my button Lenovo Care, the Lenovo Care box came and I can choose one of the quick links. However, nothing in the resource centre works. The pointer indicates that you can click on the options, but when you do nothing to everything that happens. Any help would be appreciated.

  Greg

  Just on a whim, I dragged the Lenovo Care box away from the side of my screen. When I mouse over one of the tabs Resource Center, the options on each tab comes off the box on the left, which has been off the screen where he was. If I disable a program called autosizer, everything works fine. Now to find out why.

• N500 Vista and Lenovo rescue and recovery Care do not backup

  I would use Lenovo Care - Rescue and Recovery for backup system on DVD. But R & R cannot do, and I don't know why. What is happen? I see that no stop window with the message "a backup on your system is underway" but progress are always 0%. I made the backup several weeks - then backup was corectly. Unfortunately now I have a problem with her.

  my laptop is lenovo n500 and Vista 32

  I solved problem myself in new R & R 4.21 instalation

• Bad response of SUPPORT at Lenovo INDIA

  I'm frustrated by the center of support in India. For the 3rd time and after a wait of more than 15 minutes, I am connected to a support staff who then abrubly disconnects the line.

  How wonderful. Thanks Cleo! After the escalation, the process was normally and smoothly.

  Thanks to Deepika at Lenovo care in India for effective coordination between me and a local authorized service center.

  Deffective HDD was eventually replaced.

• Downgrade of Lenovo P780

  Hi, I upgraded my lenovo p780 kitkat 4.4.2 phone and I am kind of face some slowness in the phone. I want to downgrade back to the original jelly bean (4.2.1) sent by Lenovo with the best customizations. Please let me know how to proceed. Note: lenovo care (Surendranagar, Gujarat, India says): we cannot upgrade to Downgrade. I called Lenovo care (Rajkot, Gujarat, India)--said: we cannot upgrade to Downgrade. Give me all information step by step... (I downloaded the software tool by http://androidxda.com/download-lenovo-stock-rom-models & smart phone, Original Firmware Drivers) I do not understand option software flashtool ((MOTA SIU as,? Any format + download? Firmware update? Download only? ) Please call me on my MB. + 91 *. Best regards, Bakul Valley

  Moderator Note: personal information removed for the protection of the Member.

  Post video p780 downgrade... on YouTube. com

• Lenovo L420 restarts while gaming

  Hello! I want to say that my lenovo TP l420 restart game while... Basically whenever my system its normal temperature boot is around 60-70 degrees. & When I start a game it affects 90-100 I tried lenovo care system in which it started testing parts lappy & during the test my lappy stop... Please reply as soon as possible... my laptop is under warranty but the problem is that my brother gave me as a gift & he bought Home chicago... makes us laptops lenovo will receive free a copy of service in inida if its under warranty.

  Thank you

  You are overheating and running too hot in general. For international service, look here:
  http://support.Lenovo.com/en_US/product-service/IWS.page?

• LENOVO N500 of 300 + BIOS UPDATE = blue screen loop

  My problem is with my LENOVO 3000 N500; that I was updating today (09/29) on the LENOVO web site. I had been looking for updates required and recommended; the update was for the BIOS. Before installing, I knew that the unit would be shut down/re-start. When I restarted; the first screen that opened has the white screen, with the words of LENOVO, which, in my experience, allows the user to proceed or move in the ThinkVantage mode or rescue & recovery. The next thing that seemed was menu when I choose "Normal startup" or "Safe mode", but all options gives me to the next screen which is a blue box with an error (it lasts for one second or less) and then laptop is restarting again. The Lenovo care button does not work, also when I tried to boot my laptop from XP CD, he also failed. Could you please help me with this? What should I do now?

  Nevermind

  Before I installed Win XP I changed option SATA in the BIOS from AHCI to IDE, so after flashing new BIOS this setting was still RESPONSIBLE, so Win XP wouldn't start.

  Also, I could not the BIOS settings using the Lenovo care button, but one of the f... help.

  Problem with the BIOS resolved

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Creation of CD Rescue and Recovery

  
  

  about this problem... by the center of lenovo... messages, I got an update of the system has been proposed... and so I did... I can now create the r & r cd... one of hitch but... After you run the update and restarted... lenovo care is no longer functioning... it does not work when I double click on the link to my office... in any case... CD R & R is much more important... Thanks a lot guys...

• loading K900 problem

  Therefore, the next thing, k900 is bug. Games are not as smooth as I thought.

  now for last days im really annoyed as my k900 had stopped charging and is dead now.

  It loads just for a few seconds when I try to push or tilt the usb cable. I tried other sockets, cables and adapters, nothing worked. I called for the support they gave me an address that was 10 km from home. When I reached them and I said my problem for them, they were shocked as "what? Lenovo phone? "and says they can't help they only repair laptops. I don't know what to do. IM furious. I shouldn't trust on lenovo! can someone help me?

  Hey

  I respect your opinion, but I think that lenovo care are not in the same boat with you, my phone has the same problem too, I went to lenovo's guard and find it strange that we have only a smartphone care throughout the State?

  In any case, if the rep of Lenovo has seen my phone died and says the usb port is defective and asked me to wait 15 days until the usb receiver is shipped to them, fine, so when asked the cause of this problem, he said, I used the spare cable which destroyed the usb card...

  The bolt box on our k900 is USB micro-A, while the charger that I used was charger note 2 of samsung that has port micro-USB B on it, said.

  For a detail of clarification heres the end-

  

  So, I asked the rep to buy me a lenovo as a charger getting k900 charger is imossible on net. Also his strong to find micro - a USB charger of any phone, either.