Lenovo care blue LED

Similar Questions

• BlackBerry Smartphones blue LED makes Me crazy!

  Hello and first of a UK based 8820 newbie.

  My BlackBerry is connected via bluetooth to my car hands free kit blue LED flashes constantly which is a bit annoying during the day (it is mounted in a Windows support mounted in my line of sight), but at night, it's just too much. What I can't work is how to disable the blue LED.

  I hope someone can help me otherwise that looks like some black ribbon will be glued on it and I don't want to do that.

  Thanks in advance!

  Neil.

  You can disable the Bluetooth led by going to Options > Bluetooth. Press the Menu key, and select Options. Set the connection seeing on Off option.

  Note: I heard that the setting of this option off can sometimes cause Bluetooth connection problems. So, if your connection has problems after disabling this then try put back on.

• Qosmio G20 - Blue LED for the volume does not work on Windows 7

  Hello

  I have a minor problem. Yesterday, I update my Qosmio G20 on 2 GB of RAM and I have install Windows 7. Everything works fine even better than XP, but I notice that my blue led lights for volume no longer works.

  Is there a driver I need to install or any solution that these blue lights for the volume can function again?

  Hi Gabriel,

  I m not Qosmio G20 owner but I m asking you to install Windows 7. I think XP would be the best choice for this portable little plu

  Normally the lighting on Toshiba laptop to install the package of added value. It s is only not for this model, so I put t know if it will work. You should try to download from another model of laptop that is Windows 7 supported.

  In addition also check the BIOS if lighting is enabled.

• Blue LEDs on the front too clear on Satellite Pro U300

  Is it possible to lower the blue LEDs on the front of the Pro Satellite U 300 a bit? Power supply, HARD drive, etc. - I find them very distracting in a dimly lit room.
  Thank you.

  No, there no way to do it. But what about Sun ;)

• Indicator panel blue LED front M9040N steady mode 'sleep'

  HP Pavilion Elite M9040N running Windows 7.  Recently, the blue led on the front panel began to stay lit continuously when the computer is in "sleep".  In the past, the blue indicator would rarely stay on mode 'sleep', but a reboot cold could solve the problem.  Recently, I tried to turn off the PC and remove the power cord, and then restart after plugging in the power cord.  However, the remaining blue light on when in mode "Eve".  How can I get the blue LED indicator turns off when the computer is in mode 'sleep'?  TIA.

  Go to the control panel; Device Manager; Click on USB wireless 802. 11 b/g adapter. Click on the tab advanced; the value Carrier Detect, Radio on / off and values Smart Scan to 'Activate' (which disables these features).  Set the appropriate values on "Disable" to help as needed.

• Blue LEDs are disabled on my laptop series Qosmio G40

  All the blue leds on the top of my laptop are gone.

  Does anyone know how to get back them on the?

  Hello!

  Maybe you should give us more information about the model of your laptop and the blue LEDs do you mean exactly.
  Otherwise I can t say anything.

  What operating system do you use? You have uninstalled a Toshiba tool?

  Good bye

• How to disable the blue leds on Satellite P100-260?

  I have this laptop and I want to turn off the blue leds near speakers, but I don't know how to do this and it is possible.
  Thx for your help :)

  Hello

  I can just confirm that. Unfortunately there is no option to do this. I assume that only LED power disconnection of the cable can help. Maybe service will do it for you. You can offer to pay for a cup of coffee. ;)

• How can I turn on/off the blue LEDs on the Satellite A100?

  Hello

  Does anyone know how to turn the blue LEDs under the touchpad? They are very nice, but when I go to sleep they light a lot and it is a small problem. Maybe someone can help me or suggest something else.
  Thanks for any answers

  Emil

  Hey Buddy,

  You can't turn them off. If you really want that you would have to reprogram the BIOS. And to do this, you must be a Toshiba engineer and a lot of experience with the low level hardware programming.

  You can also stick the tape on the lights. :)

  That is my suggestion.

  Welcome them

• How to turn off the blue LEDs under the speakers on Satellite P100?

  Hello

  I have a P100-143. The laptop is great. How can I turn off the blue LEDs under the speakers? It's very scary and absolutely useless. If anyone has a solution, please share it. THX.

  Hello

  AFAIK there is no switch or something similar. I presume that the only solution is to cut the cable.

• Satellite P100-347: Blue Leds - they disabled/disabled?

  I read several topics in the forum on the P100 Harman/Kardon speakers Blue LEDs/lights. None expressed a definitive answer on how to turn off the LEDs.

  I was wondering if a new update on this issue has occurred. The last post of forum about this was in February. Is it possible to turn off those annoying lights in newer models of Satellite? I would disconnect the wires so its an easy task.

  My laptop is the Satellite P100 - 347 (SPA6E)

  Thank you very much

  Hi Dan

  Have you used advanced search forum?
  I don t think so!

  I have used and found several discussions on this topic.
  I searched in the section P satellite for blue light and learn from these publications:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16008&MessageID=58569
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19701&MessageID=72256

  Then why write something that has already been discussed here in the forum?

• The blue led speakers do not work on my new Satellite P100-487

  Hello

  Just bought this laptop and have a little problem. Everything works fine, but I think the blue led next to the speakers should work also.
  I don't know why they are not function...

  Could someone tell me how to light their? Or I'm not able to influence the led?
  I would be very happy if someone could help me quickly...

  Greetings

  Atunc

  Quick response, the blue leds are only available on books with nVidia graphics cards.

• SimpleSave 1 TB Drive Blue LED

  Hello

  I have the SimpleSave 1 TB drive and working with VISTA 64-bit.

  If the computer is proven, the drive blinks all the time with the blue LED.

  It bothers me if I'm sitting on the desk. What kind of error messages if the flashing indicate?

  See the response of support...

  Your computer can send signals to the drive when it is turned off. Try to disconnect the USB cable from the computer to see if the light still flashes. Additionally, make sure that you are not connect the player to a USB hub.

  It is true. On another port, the led does not Flash. Looks like I can on certain ports, even the computer is turned off.

• Lenovo care button not lit in Win7

  Hello

  I have a problem with my SL500. After the upgrade to Win7 lenovo care button is not more informed. However, the button works. When you press the button of the ThinkVantage Toolbox is underway.

  I already tried to install the WinXP driver, but it does not work.

  Someone at - it an idea of what to do to get the button lights up again?

  Thank you

  Hello

  The solution that worked for me, is that I have installed "Lenovo Productivity Center". The link below:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-61432

  Tell me if it works well for you too.

• Master of IO card blue LED flashing

  Hello, I have an alienware aurora ALX R4 and when I opened the door to have a peek inside I see a blue LED flashing on the master of i/o board, is - this normal?

  Ahmed I can only say that it is not a question based on the Area-51 MIO. Issue 3 of the LED flashes (blue) and it is close to the part of READING of e/s of the MIO. Just to see these messages on the Diag tests:

  en.Community.Dell.com/.../20148230.aspx

  en.Community.Dell.com/20128296.aspx

• Lenovo Care button + F11 doesn't work do not

  Hello.

  I have a 3000 N200 that I just replaced the HARD drive on.  I've used Norton Ghost to clone the old drive to the new, and there are a few problems to get XP to start later.  I found a few tips elsewhere that said I have to operate the system upward with an XP installation disc and Run fixmbr in the recovery console, which did not work because the XP installation couldn't find any HARD drive - although it is properly parsed by the BIOS.  Then I tried to boot from a W98 boot disk and running fdisk/mbr. He finds the HARD drive, but still no joy.  Then I used W98 fdisk to look at the drive and discovered that the service partition showed that the partition is active then I used fdisk to set the XP partition active.  Who has worked; I can boot XP now without problem.  However, if I press the Lenovo Care button, I get the option but screen by selecting F11 does not the system go into recovery mode.  After a few seconds it starts right in XP.  I was wondering if the W98 fdisk/mbr crushed something specific Lenovo in the mbr, which is the cause to happen and if there is a way to get the service back 'just in case '.

  TIA

  There are two options on the diskette; one, I think, he said "try this first" and the other will recognize the mbr as non-Lenovo mbr. Have you tried the first option first, then the second option?

  Otherwise, I don't know, maybe it's that the ghosts didn't give something correctly? Did you use the switch of the ib in Ghost?

  If you search the forum for "ib switch" (with ""), you should find plenty of information relevant If it's a review.

  Edit; involuntary smiley corrected