Lenovo G50-70 plugged but not supported on windows 10

I upgraded my lenovo G 50-70 to 10 Windows. I encountered a problem, power laptop computer watch icon is plugged in, does not support. I couldn't find the drivers of energy management for windows 10 on support/download page. Help me solve the problem.

Link to photo/image

Mod comment: Over size photo converted to establish a link. Please visit About-Posting-Pictures-In-The-Forums

Thak in charge you for taking.

In fact, he worked with the bios update.

Tags: Lenovo Notebooks

Similar Questions

  • Lenovo U400 battery plugged in, not supported

    Most of the solutions I found on the Internet involves the removal of the battery, but this is not possible with the U400. Is there a way to fix this?

    Hi nsicurella,

    have you tried this one?

    http://forums.Lenovo.com/T5/IdeaPad-Y-and-U-series-laptops/Z570-battery-plugged-in-but-not-charging-...

  • Laptop plugged but not supported (batttery is good)

    I have the Acer Aspire 5810TZ-4657 model running on Vista. Everything works fine except when it is plugged in, he refuses to charge the battery.  I removed the battery and rebooted. My computer does not load at all. I know that the battery is good because it was working before and hold a charge for more than three hours. Now every time I have unplug my computer, I lose and restart the course. Is this a bug of Vista?

    Hello

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Acer - USA - Service and Support - drivers
    http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

    Acer - worldwide
    http://www.Acer.com/worldwide/selection.html

    -----------------------------------------------------------------------------------------------------------------------------|

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
    RESTART which will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • Satellite A500 - plugged, but not charging

    Hey guys, I hope someone can help me with this.

    I bought a Satellite A500 about a year ago. Last night I decided it was time for an upgrade, so I looked at the new a500s. Put my current for sale online. Woke up this morning with a little problem.

    When the power is NOT connected the laptop does NOT start at the top. When I connect the power, while the laptop is still off, the battery charging light lights up for about 10 seconds then turns off. When I boot on windows, it is said 34% remaining on battery, plugged, does not support. I tried every answer google gave me so far, I have even restored my laptop to default.

    Please help me, as for now, my laptop is unsaleable and frankly quite useless.

    See you soon,.
    Erik.

    Hi smokegfx,

    What happens if you try to start Notepad with AC adapter only? You can start the computer?

    No doubt the control of load on the motherboard or the power adapter is damaged, for the battery can t be charged more but it you can test if remove the battery and test it with adapter only.

  • "Plugged in, not charging" on Windows 8 HP ENVY dv6-7214nr Notebook PC

    I have owned this product for nearly two weeks without any problem. Now, he says he's "plugged in, not support.» The battery is now 94% of the fees, but does not load any further. The PC can operate without the battery inserted, so the power adapter should not be the problem. HP Support Assistant says that the State of the battery is 'OK '.

    You can follow the steps listed below document:

    http://support.HP.com/us-en/document/c01443470

  • CD/DVD drive, it is not supported by Windows XP and Bios

    I bought a new Mat * un Panasonic cd/dvd player.
    It only works on Windows 2000, it is not supported by Windows XP and Bios, so I can't start with.

    Could you please provide some information about yourself (name) for laptop?
    Did you buy this player or that player supplied with the notebook?

    If the player is not berecognised by the BIOS, then in my opinion, the drive supports bad master / slave / parameters c - salt.
    You should know that not all drives are compatible.

    Cannot change settings as the dose of disc supports not no rider, but only the firmware.

  • KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

    KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

    Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

    After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

    I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

    I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

    Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    When you disable Antivirus:

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

    Dear support,

    I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

    Pls can update you with the new drivers of windows 8, which his slove my problem.

    Thanks in advance

    Concerning

    Vermorel

    Hi Majusko,

    If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

    HP LaserJet and Color LaserJet - Windows 8 media

    HP trade-in program

  • HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

    Original title: Sony Hanycam HC20

    I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

    using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

    I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

    as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

    There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

    The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
    You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.
  • LifeCam HD-6000 is not supported by windows 8

    I have Windows 8 installed on my HP all laptop.  I got the LifeCam HD-6000, but when I try to install it I get a message saying: it is not supported by Windows 8.  I tried to go to the Microsoft website to get an update, but that does not work either.  I would return just the webcam?

    See the Compatibility Center to find out if it is compatible:

    Compatibility for Windows 8 Center:
    http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/home

    also:

    Microsoft Hardware:

    http://www.Microsoft.com/hardware/Windows7/support.mspx

  • Drever USB not supported in Windows 7

    Hello Sir,

    Please suggest of the my leptop USB Drever not supported in Windows 7.

    Hello:

    This USB3 driver should work for W7 on your HP Pavilion computer 500-241 x Desktop PC:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5404560&swItemId=vc_121496_1&swEnvOid=4058

  • Previous games in windows not supported by Windows 7?

    I just upgraded my OS from XP to Windows 7 Professional and have noticed that my games like Freecell, Spider Solataire disappeared. These are not supported by Windows 7?

    Press the windows key and type in the "windows features". Now click on 'Turn Windows has or not.' After that, you should see 'Games' with a box and one more at his side, go ahead and press the sign more and find the games you want to install. Press OK when finished.

    Good luck.

  • Windows dvd maker problem: I hear but not image using windows DVD maker.

    I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

    original title:
    Windows dvd maker problem

    Maybe the part "What to do if you have questions" of the following
    article would offer some ideas.

    How to burn DVDs with Windows DVD Maker
    http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  • I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?

    Original title: M2TS

    I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player.  How to convert files in a file type supported?

    Hello

    The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.

    Codecs: Frequently asked questions

    WARNING OF THIRD PARTY
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Messaging Verizon service uses POP which only is not supported by windows 8 and outlook 10.

    Messaging Verizon service uses POP which only is not supported by windows 8 and outlook 10.  What are my options.  Do you know if verizon is working on a fix for this problem?

    Messaging Verizon service uses POP which only is not supported by windows 8 and outlook 10.  What are my options.  Do you know if verizon is working on a fix for this problem?

    Even if Verizon was working on a fix - it would be a matter of Verizon.  At Verizon, he has not broken - just, they do not offer the service.
     
    Your options are to use a different email client, webmail, or get an e-mail service provider that does not have the same limitiation.  There's a reason many people have Google and Hotmail/Outlook.com e-mail accounts.  A good thing about to get something like one of these: If you change internet service providers - just email continues to work.

Maybe you are looking for