Lenovo Ideapad Y570 - help w / mode of intel

Similar Questions

• Lenovo IdeaPad Y570 restore please help

  Well so my Lenovo IdeaPad Y570 has recently suffered some physical damage while on and did serious damage, HARD drive and I was forced to replace it. I was under the impression that OneKey recovery system was a full on-board catering and didn't know it was the basic hard disk. I seem to have misplaced the recovery disc supplied with my notebook, so I am running low on options. If anyone has one they would not mind selling for me (if is not invalidate all guarantee/agreements) would be great. Reply to this thread so any help or answers.

  @HelpMeOut,

  Please contact technical support to for the disc OKR.

• Problem Lenovo Ideapad Y570 OKR

  Hey guys... I have a series boring problem

  I have as I said Ideapad Y570 Core i7 etc... I installed Win7 Manager and I met a wired problem, so I used the Center Manager win7 den 'den all the components of the system. "

  I did the Lair of all components of windows outside microsoft and also hidden files

  then I started to deal with the 'death' blue screen, so I decided to get my windows.

  I chose the OKR who requested a reboot... but it does not connect the recovery environment... tried so many times but nothing did.

  So I created the dics of recovery which were 3 DVD... to the factory default settings... then I started from the first DVD, but I will stop when the screen is black and loading with a setting "windows loading files.

  I tried to uninstall and reinstall the OKR but nothing happened.

  Please help me to recover my laptop for the default setting!

  
  

• Lenovo Ideapad Y570 Touchpad 'Tapping' question

  Hello

  I just bought ideapad y570 and its been fine, but after months of use it my touchpad does not work as it was before.

  I noticed that when I tap on it, it does not select anything on my computer. It moves and everything but when I try to choose anything, it does not.

  I already have FN + F6 and it did not work.

  How can I remedy this?

  Hello

  your synaptics touchpad driver is installed?

  If so, you must modify the settings for hardware-device manager and printers-mouse. After the opening of the properties of the mouse, go to the "Device settings" tab and click on settings. After that, you will need to open the "Tapping" page and enable it, if it is not enabled.

  If you do not have the driver installed, you can download from the link below and do the same things as above, if the problem persists. just chose the right operating system

  http://www.Synaptics.com/resources/drivers

• Need help to turn on hardware virtualization on my Lenovo Ideapad y330

  Hello

  I have ideapad Lenovo Ideapad 330 with Config like below:

  Processor: Intel (r) Core (TM) 2 Duo CPU [email protected] ghz 2.00 ghz

  RAM: 2GB

  HD: 320 GB

  OS: Windows 7(32bit)

  I want to know is hardware virtualization supported by my laptop, if yes, then how can I activate it because the Intel VT Settings feature is coming in the Bios disabled and I'm not able to activate.

  Please provide a solution for it.

  ---

  Thank you

  updating the BIOS will not help you because your chipset does not support vt. Thus, there is nothing you can do about it.

  http://Ark.Intel.com/product.aspx?ID=35581&code=T5800

• How to install W8 in Mode for Lenovo Ideapad Z510 UEFI?

  Hello world

  I've been struggling with the w8 installation on my laptop Ideapad z510 in UEFI mode, but not I could succeed it or me I found something that might help. I will explain clearly the case.

  Point 1:
  As I understand it, for successful installation in UEFI format w8, we need choose the mode of 'First UEFI"from the Boot Menu in the BIOS. Then, the source of the shoe must be specified to identify the rigid path to documents to be loaded so that the new OS could be installed correctly.

  Pharmacodependance1:
  It is possible to choose UEFI boot mode first, but it is not possible to choose the USB for UEFI boot path in this case, which does not allow to succeed a UEFI boot to your computer. You cannot reach the DVD or USB, the installation files are, and start the installation process.

  Point2:

  If we consider the first case, you must choose the Legacy Support of your computer startup mode and achieve the USB or DVD drive to install the new operating system on the computer.

  Problem2:
  To succeed the UEFI mode when the computer starts, you should see 4 different partitions on your drive to the point of disc selection, if you choose the disk you install your operating system. However, when you select the Legacy Support in BIOS mode, the disk partition is limited to 2 in my case, that are:

  • Main drive
  • Reserved system (350 MB)

  That is why, when I continue the installation, the OS is installed on the traditional way. After installation, when I go into the BIOS to choose the UEFI boot mode for mode, the laptop checks some network connections and said

  • EFI network failure 0 for IPv4
  • EFI network failure 0 for IPv6

  respectively.

  So, advice, aid, ideas and suggestions are gladly welcome to overcome this problem. Could you please help me?

  PS: Please don't say that "you can't install because your computer does not support", because I have received computer technical service and a W8 version has been installed in UEFI mode. However, I deleted to install W8 pro.

  Greetings,

  Okan

  First of all, your bootable USB key must be created in the UEFI. Just google and you will find solutions.

  You can install W8 mode UEFI. Just allow to boot from USB in BIOS, select Exit Saving changes and restart.

  I think it's your basic problem. Let me know if you have already done this and still having the problem.

• Help! Need to find a way to replace components of Lenovo Ideapad U300s!

  I bought a new 5 GHz Intel Centrino wifi PCI-E card to replace the 2.4 ghz card that came with my Lenovo Ideapad U300s. Unfortunately, I can't access the PCI-E location to Exchange on the chip. I can disassemble the laptop and go to the bottom of it, part but the PCI-E slot are available in the part superior of the laptop (which is the upper part of the PCI - E slot is directly under the keyboard, but I can't just to disassemble the laptop from the bottom).

  Someone else had this problem? Looks like it might be impossible to swap the PCI-E card without disassembling the laptop world. Thoughts?

  Hi Johnny bananas,.

  U300s Service training video...

  http://Lenovo.f.relayware.com/content/CourseWarePublic/6581/player.html

  Please Note: only approved Lenovo wireless cards will work (white list).

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/Z580-Don't-accept-my-new-intel-6235-wifi-card/...

  Zehn

• IdeaPad Y570 fan works not properly

  Hello

  The fan on my IdeaPad Y570 suddenly stopped marketing. It does not spin regardless of the temperature, and therefore, the temperatures reach 90 C +. Mode of dust collection works very well, the fan turns as expected for the cycle and seems normal. If the fan is not physically broken or clogged. I also installed 3rd party software CPUID HWMonitor to check if temperature sensors work, and they all show temperatures at levels expected and more than high enough to warrant coming fan.

  I don't think that I have installed a new software that might interfere with it. I tried to reinstall the Lenovo Energy Management software, but that did not help. I also tried from the laptop in safe mode, without result.

  Thanks in advance for any help you can provide.

  HWMonitor screenshot:

  

  Applied Windows updates and this problem is solved. Hope this helps others in the future.

• S400u - CustomEventMonitor.dll error - Ultrabook Lenovo ideapad S400u

  Hello, when I start my lenovo (10 windows), it always send the following error message:Error CustomEventMonitor.dll

  I have a ultrabook Lenovo ideapad S400u running windows 10

  Help, please

  Thank you

  Alex

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Please see: https://forums.Lenovo.com/T5/ThinkPad-X-series-laptops/LENOVO-X230-CustomEventMonitor-DLL-quot-there...

  Kind regards.

• Advised by a Lenovo Support Technician that Lenovo IdeaPad u330 that equipped of Windows Vista has been infected

  My pc is a Lenovo IdeaPad u330 that running Windows Vista Home Premium 32-bit.  I have 3 PC over a wireless home network.  Recently, I have been instructed by the Lenovo Support telephone call center to enter "cmd" in the Task Manager, did so and was taken to the black C:\WINDOWS\system32\cmd.exe screen.  I had to then enter "cmk", did and received message next-'cmk' is not recognized as internal or external command, an executable program or batch file.  Support staff advised that this indicated my pc has been seriously infected and needed immediate attention.  My pc works well and I have McAfee installed, having received no warning and a complete analysis of all recommended system was OK.  Should I worry or the person was just trying to sell a service?  Thank you.

  * original title - cmd & KMC - suggested by Lenovo Support *.

  Hello

  There are no KMC program or command on most computers. So, if we had to
  to be a CMK on Lenovo computer (or you) should have Add.

  Did you call Lenovo support, or maybe it was one of those false calls trying to get
  money or your personal information? Hard to believe that Lenovo would use these tactics
  trying to sell a program or service.

  Check with Lenovo support and forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  =========================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Lenovo IdeaPad Z50-75 - cannot install Windows 8 it is not booting from the DVD

  Hello

  I bought a Lenovo IdeaPad Z50-75 (with Free DOS):

  BIOS version: A4CN24WW (V 1.03)

  Im trying to install Windows 8, but it just doesn't work. no question, if I allow secure boot or turn it off. No matter if I choose from the "OS Optimized Defaults: [Win8 64 bit]»

  I changed the boot priority so that the DVD player is on the highest place (1).

  has obtained a Win8 DVD work, has also got professional win7, but I prefer to install Windows 8.

  Although Win7 is OK also if it will work then.

  I don't know what to do else that pass around these options. and it doesn't help me at all.

  Whenever I start the laptop and choose to start with the DVD player lights up and nothing happens.

  Someone please help me with this annoying problem of hella.

  Thanks in advance.

  
  

• Lenovo Ideapad z410 bios for access to the

  Hello

  I bought a computer laptop lenovo Ideapad z410 this week, I can't access bios after pressing Fn F1 or Fn F2.

  It has preloaded win8. an advise please.

  I want to run vmware on this laptop.

  Thank you

  seehashmat wrote:

  Thanks, but I want to go in BIOS mode to activate the virtualization. The link indicates the mode windows safe 8.

  Oops! Sorry, I pasted the wrong link. Corrections have been made. Try it now. NOTE: By selecting the UEFI firmware settings gives the bios.

• Live USB of Lenovo ideapad u510 w/Fedora 19 black screen

  I'm having trouble with a new lenovo ideapad u510. I try to install Fedora 19, using the Fedora Live USB image 19 xfce spin, the player starts correctly, but when you select the option to boot Fedora 19 Live, I get a screen that is gray with a cursor at the top left, then two error messages that look almost idential to other flash each, the Fedora logo starts to load , and then the screen turns white.

  The part of the error message I got was '... ". managed to activate the AA (?) »

  I tried to re - turn on the monitor by using the function key F9 and I tried to boot from DVD with the same result. Once the screen turns off, it remains this way until I force the machine to stop. Once I forced the closure, the computer, to turn her on, past on the screen empty again without even loading the lenovo BIOS screen. Even the "novo" button does not options for me.

  My UEFI is set to Legacy / Legacy first, although the EFI setting is always Windows 8, with no other options. I looked through my settings on each tab of the BIOS and I can't find anything further to disable secure boot.

  Can someone help me in installing Fedora?

  For posterity:

  http://www.ashwinraon.com/2012/08/how-to-solve-Ubuntu-blank-screen-boot/

  http://AskUbuntu.com/questions/38780/how-do-i-set-nomodeset-after-ive-already-installed-Ubuntu

• Lenovo ideapad y510p boot on CD/DVD

  Hello

  Just had the laptop y510p and I am trying to install Ubuntu, so I have this DVD bootable and I wanted to try out Ubuntu before you install as usual, but I can't get the laptop to bot on dvd. On the start menu options, there are only EFI and a kind of network options but not dvd.

  I tried following the instructions here, but regardless of how many times I press F1 during boot, I can't start menu and windows starts directly:

  http://support.Lenovo.com/en_CY/downloads/detail.page?docid=HT036814

  Is it not possible to boot on dvd. The dvd is supposedly compatible with EFI and secure boot ubuntu 13.10.

  I don't understand why there is no option to rearrange devices to boot on my old PC.

  I managed to get the BIOS configuration by pressing the restart and Maj and then selecting settings UEFI firmware and I chance to the configurations of the bios, but still no way to find the option to start on a dvd.

  Any advice? Thank you

  I managed to install ubuntu, the problem is that my cd is defective, here's a blog where I wrote about the steps

  in the case, someone must:

  http://vaxapp.WordPress.com/2014/02/09/install-Ubuntu-12-04-3-on-a-Lenovo-IdeaPad-y510p/

  I found a lot of answers here:

  http://AskUbuntu.com/questions/221835/installing-Ubuntu-on-a-pre-installed-Windows-8-64-bit-system-u...

  Although for Windows 7 the problem is perhaps that he does not support UEFI and or secure boot?

  In windows 8 type ctr + C then the power button, then press Caps + restart and then chose the option help out and something UEFI and you will restart in the bios, then you can change the settings to disable secure boot and/or inherited instead of the UEFI boot.

  When you press F12 is the start menu, but you won't see that entries that are UEFI-compatible (if you are using the UEFI) either CD or USB

• Unable to boot from usb drive on lenovo ideapad z585

  Hello

  I created a Memtest + USB key which works very well on my desktop PC but it will fail to start on my Lenovo Ideapad Z585, it just goes right to the quick connection of Windows 8 despite pressing F12 and selecting the Generic USB 2.0 device in the boot device menu.

  Any suggestions please? Thank you.

  Edit - Boot USB is enabled in bios.

  Edit - the USB is detected as it is listed in the start menu and the bios but cannot simply start and I like I said before, it starts up fine on my desktop PC.

  Edit - I tried an another USB drive, the same problem.

  Hello
  Could disable you secureboot and uefi BIOS? He helped in many cases.
  Concerning