Lenovo K4 Note: WiFi connected but cannot access the internet.

Similar Questions

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• I can connect to wifi networks but cannot access the internet

  As the title says, I have no problem connecting to all types of wireless (password protected or not), but once I plugged in, there is always a message saying that I have limited access, and I will not be able to access internet since. It is not a problem specific to any router, it's just my laptop wireless. Direct connections (with an ethernet cable) work quite well. When I tried to solve the problems through windows I got the message error "wireless network connection is not a valid IP configuration.
  I have honestly tried most of the solutions out there but stuck on what I can do next

  Hello

  Thanks for posting in the Microsoft community. I understand that you are able to connect to a wireless network, however you are unable to access the Internet when it is connected to the wireless network.

  It would help if you could let us know about any changes made to the computer before the show.

  I suggest that you try the following steps and check.

  Method 1:

  Check out the link and follow the steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Visit the link and try the troubleshooting provided steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if these methods on the other will respond and we can provide several methods.

   

• Equium P200-1IR - wireless is connected but cannot access the internet

  Hi there,

  Need a little help!

  I just bought an Equium P200 1IR.
  I activated the wi fi.
  I see my router which is Talk Talk.
  Can I get the laptop to connect to the router and it says I'm connected,
  However I can't access the internet.

  I tried the same process by inserting a WiFi dongle into the USB port
  on the laptop, and exactly the same thing happens.
  We have other home computers that connect to the router and the internet
  OK using the wireless dongle.
  I plugged a rigid cable between the laptop and the router connection and I can't
  access the internet immediately without any problem, however, would be delighted
  to use the wireless function.

  Any help really appreciated... Thank you

  Waynec

  Hello

  Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.

• VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

  I tried to set up a simple customer vpn using this document

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

  VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the encrypted password of VmHKIhnF4Gs5AWk3

  VmHKIhnF4Gs5AWk3 encrypted passwd

  hostname VOIPLABPIX

  domain voicelab.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

  access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 208.x.x.11 255.255.255.0

  IP address inside 172.10.2.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

  history of PDM activate

  ARP timeout 14400

  NAT (inside) - 0 102 access list

  Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

  Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 172.0.0.0 255.0.0.0 inside

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

  Crypto-map dynamic map2 10 set transform-set trmset1

  map map1 10 ipsec-isakmp crypto dynamic map2

  client authentication card crypto LOCAL map1

  map1 outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 encryption aes-256

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address voicelabpool pool cuclab

  vpngroup dns 204.x.x.10 Server cuclab

  vpngroup cuclab by default-field voicelab.com

  vpngroup split tunnel 101 cuclab

  vpngroup idle 1800 cuclab-time

  vpngroup password cuclab *.

  Telnet timeout 5

  SSH 208.x.x.11 255.255.255.255 outside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 172.10.1.2 255.255.255.255 inside

  SSH timeout 60

  Console timeout 0

  username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

  Terminal width 80

  Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

  : end

  Try to turn on NAT - T

  PIX (config) #isakmp nat-traversal 20

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

  HTH

• I can connect to the WLan, but cannot access the internet on Tecra A8

  There is no problem when I use the LAN port.
  When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.

  I've updated my access point with the latest firmware (D-link DWL-2000AP +).
  I do not get a new IP address.

  My OS is Vista.

  Hello

  You have set up the WLan router with the right data from your ISP (internet service provider)?

  Further, I would recommend to disable all security on the router option and try to access the internet.
  I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
  In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.

  Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
  These tools can be used instead of own WLan connection option of Windows.

  Reset you the WLan router? This!

  Pleas check al these proposals

• From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

  I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

  However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

  Any ideas? Thank you!!

  JFerguson15,

  If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Vista can communicate with the wireless router, but cannot access the internet

  I have a SONY Vaio with Vista.  Until recently, it worked fine with an old router Netgear wireless with no encryption.  I replaced the router with a Linksys E1200 and set up for WPA/WPA2 encryption.  My iPod, iPad, an HP printer and laptop running Windows 7 quite change with absolutely no problem.  After entering the SSID and password on the Vaio, it connects to the router but will not access the Internet.  I tried to reset the router and cable modem, without success.  Suggestions before you start the laptop across the room and rid my life of the bane of Vista forever?

  Hello

  ·         What is the antivirus installed on the computer program?

  Let's try the following methods.

  Method 1: Temporarily disable the antivirus on the computer program and check if the problem persists. If no problem occurs, then you need to firewall settings in the security software.

  Note:  Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Method 2: Follow the steps in the article mentioned below.

  In the Windows wireless network connection problems

• computers shows no internet connection but can access the internet

  Lately, my internet has been slow. Also, I had problems to connect to some sites to download some updates and product registration. I'd get a message that there is no internet connection detected. That's when I noticed that the network icon would increase from 2 computers with a blue dot on them to just 2 computers. I checked my "network and sharing Center" and it showed that I am not connected to the internet (red x on the line between the network and internet connection)... I can still access the internet and navigate well. When I tried to diagnose and repair, I get this message.

  "You need to register with the provider of internet services of this network to have access to the internet" and below "connections to Web pages are currently redirected to a different Web page"

  "Click to open the Web page, if it is an Internet service provider registration page you can read the registration information."

  When I clicked and it took me to http://www.microsoft.com/en/us/default.aspx.

  I turned my modem and the new, and it seems to connect again. I just started experiencing this recently (in the last week).  Can someone help me solve this problem?

  He seemed to have solved the problem. I went into the Device Manager and disabled my network card and enabled then again. I'm also done to restore my system to the rear before the problem started then uninstalled and reinstalled NIS2011. I have not reinstalled IE9 yet. Thanks for the help

• BlackBerry smartphone Wifi connected but cannot access internet 9300

  Hello

  I recently changed my data on my unit plan, but after I did it I realized that my WiFi is not working. My wifi connection is fully connected (and my data are disabled), but it won't work at all.

  Help, please

  AmandaTemple wrote:

  If I have my data enabled as well as my wifi then how can I know that I am not only my data plan. I would avoid a large beak.

  Hi Amanda

  If you want to be sure that you only use wifi data, then on manage the connection you can turn off your Mobile network. But you have to turn on your data Services, allowing data packets to enter your device With Data Service Off in your device, you can use these data services.

  Let us know if you have any questions.

• Win 7 cannot connect to internet, found wireless & LAN network but cannot access the internet.

  I've updated my laptop lenovo Y430 to Windows 7 Home Premium about 6 months ago, it has been working fine until last week, I just can't connect to the internet more. I used to use a wireless network, now it says that it is connected to the network, but 'no internet access', while the signal says it's just. I also try to always use the Wired internet, not luck, and worse yet, he says no 'identified Network/No access to the Internet.

  "I have troubleshooted, that is the message he gave me: 'Connection to the Local network' is not a valid IP Configuration.

  I run 'ipconfig' cmd and this is what gives me:

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e99e:3f78:35 c 3:7056 %11
  Autoconfiguration IPv4 address. . : 169.254.112.86
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  and I've run ' ipconfig/all', that's what I got:

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: salt - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-16-EA-DC-69-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1E-EC-96-77-04
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e99e:3f78:35c3:7056% 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.112.86 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 234888940
  DHCPv6 DUID customer...: 00-01-00-01-10-38-1C-FD-00-1E-EC-61-19-2C

  DNS servers...: 85.255.112.123
  85.255.112.234
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Please answer asap, HELP!

  Thank you.

  Sincerely,

  Evan

  

  Yes.

  Routers and switches are different types of network devices.  Routers are "smart".  Switches direct network traffic between computers on a single network, while routers can act as the interface between two networks (for example, the Internet and your Local network). There are many explanatory pages on the Internet about it. Here'sa .

  Actually, most "routers" sold for home use today incorporate both a switch and a router (and in the case of "wireless routers" also incorporate a wireless access point). Routers include usually a (NAT ) network address translator, also a DHCP Dynamic Host Configuration Protocol (), a proxy of domain name Service (DNS) server, and a hardware firewall to protect the local network from malicious intrusion on the Internet.

  Your provider of Internet service through your cable modem, "sees" the WAN port of the router, as a computer (which is) generally configured to automatically obtain its IP address.  The ISP's DHCP server assigns this port the only IP address that is allowed to you.  It is an 'external' or 'public' IP address, and this is the address that other computers elsewhere on the Internet use when they drive traffic to you.

  The router's built-in DHCP server assigns 'private' IP addresses for each of the computers connected to TI (no matter if they are connected by wire or wireless).  As a general rule, these are of the form 192.168.1.x or 192.168.0.x, where x goes from 1 to 254.  These IP addresses are not 'seen' by computers on the Internet.  Instead, the feature NAT on the router directs traffic to your public IP address to the correct of your internal computers (and vice versa).

  A switch can't do it all.  If your authorized service provider, you can connect to your switch directly to your modem and the ISP's DHCP server assign an IP address publicseparate to each computer connected to the switch.  Because your ISP does not allow more than one public IP address from your account, its DHCP server assigns such address to the first computer he sees connected to the switch.  If several computers are then connected to the switch, the ISP's DHCP server simply ignores them: too bad, computer #2, you do not get an address, and so you can't connect to the Internet.

• Windows 7 connects and says "Internet access", but cannot access the internet!

  Hello, please help me with this annoying problem in answering it.

  My PC connects successfully to the mobile hotspot and indicates that he gined Internet access, but when I try to browse the internet (I tried Google Chrome, Internet Explorer, and Mozilla Firefox), or use any application that needs to connect to the internet (such as online games) HE DO FACT NOT WORKING, or SAY "NOT CONNECTED to the INTERNET.

  In the time that each connected device another works perfectly.

  Please when you view this thread the RESPONSE and not SIMPLY LEAVE.

  Thank you to everyone who helps me.

  Thank you to everyone who helped or tried to help me. It if a virus blocking internet access to applications. I now come back to my PC back working.

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Welcomed the peripheral connected network cannot access the Internet

  I had problems getting my network hosted to start for months. Now, it starts very well and my Samsung Smartphone shows connected when I turn on the phone's WiFi. BBM has even said 'connected' in the status bar. But I can't access the net. Browsers not loading pages in all, BBM messages and whatsapp are not sent. When I checked the properties of connection WiFi network from the phone, signal is "very strong", speed of 54 Mbps. DHCP has been disabled at the start. After I enabled it, the phone didn't connect at all. Stuck on "getting IP address." Network troubleshooting says "connection to the local network 12 has no valid IP address. The connection to the local network 12 is the connection that uses Microsoft Virtual Wireless Adapter.

  Hi Pierre,.

  I understand that you have trouble connecting to the hosted network. You can contact Windows 8 IT PRO TechNet forums for the hosted network troubleshooting steps.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home