Lenovo propeller - res Max Screen? 4 k?

Just ended up a 4 k TV and I was wondering if the propeller would be able to manage the video output of 4 k DP to HDMI 2.0? Or is it a little asking much of the old graphics card intel?

Anyone know?

you would need a miniDP to DP cable for it to work. But I tested this Setup yesterday at my friend's House, my propeller cannot withstand the 4K @ 30 hz.

Tags: ThinkPad Notebooks

Similar Questions

  • My lenovo ZTE A1000-G screen black but on

    My lenovo ZTE A1000-G screen black but on I can not do anything by pressing the power button / stop + flight, until the touch pwr, touch pwr + low-flying and flying up and down but nothing happened please help what I do to solve this problem, it happened when I was playing a game in the middle of a game in progress lag and when I press the power button the screen turn black, but always on it please help...

    This is my new tablets...

    (Sorry for my bad engglish)

    Hi Grenven,
    Do what I say to reset (restart) your Tablet: -.
    --> Memory location opened by card (SD card).
    -> Take something thin and sharp as a safety pin or a toothpick.
    -> Now, you will see a small hole like structure near SD card slot. (In fact it looks clearly if there is something on the inside, but there are.)
    -> Spend your pointy thing in this hole up to a certain distance. (Pass slowly inside until you hear a clicking sound)
    -> Who has the reset button which will restart your tablet of any situation.
    -> Do not lose patience while finding the reset button. Do what I say and your tab will be back normal. Find it for the first time is a little more difficult but follow my steps, and you will get it.

    Good luck...!!

  • Lenovo Y50 - 70 flickering screen

    Hi, I recently bought my Lenovo Y50 and begins to have the screen flickers. There are lines horizontal flickering and the screen flashes. This is more apparent when the charger is connected and when you watch videos. I can immediately see him flickers when I turn on my pc, even if the charger is not plugged in. Can someone help me solve this problem? It's really me mind, as it was only about 2 months because I bought this laptop.


  • just got a new lenovo y50 and the screen does not come

    Hello.. I had a y50 lenovo a day ago. I loaded and when I turned it on the custom screen shows something... it won't turn... Only the lights on the keyboard upwards
    Thank you

    thx for your help... .but I guessed it was a connection problem... so when I opened, I find that the cable between the motherboard and the screen was loose... then it worked, I saw the language and region settings

  • [SOLVED] Lenovo Y50 - 70 white screen at startup

    Hello everyone,

    I just bought a Lenovo Y50-70, without an operating system. Problem is, I'm not able to enter the UEFI or start the installation somehow media. I'm just presented with a black screen, no matter what I do (tried all keys turning on: novo button, ecc, F12, DEL, F2,...). Any suggestions?

    Thanks in advance

    Never mind, resolved the problem. There was little Ribbon on the pins of connection from the motherboard to the screen of the computer. Removed the tape that everything works like a charm!

  • Z2 vibe Lenovo stuck on opening screen

    Hey everybody today, here is my problem
    today when I was using the phone I pushed power button for long aftee that my liquid phone upward
    My phone is going to live?

    What does "glued to the opening screen? Make sure that you charge your phone and full load try to start it again. Should work. If it's not, and you are stuck on the boot screen you most likely need a recovery mode, but be warned that a recovery mode would most likely delete all your data. Maybe this can help:

    https://forums.Lenovo.com/T5/K-S-and-vibe-series/S90-stuck-at-the-boot-screen/TD-p/2067491

  • Lenovo G530 update blue screen BIOS now!

    OK, I have a lenovo G530 4446 23u service code with. I went down to windows XP and it worked very well. I've been on lenovo.com and seen that there is the latest bios, then what I used (I think I was 1.06, and there is now 1.09) so I decided my bios flasher to bring them up-to-date. She flashed very well and asked me to restart so I said okay and now whenever I try to start the computer, it passes through the screen of the bios on windows, XP boot screen then flashes in the display of 'blue' and restarts. It does not start in safe mode or any mode. I put in my XP disc to reinstall XP and I get it to boot from the cd and it loads for a while, then goes to the 'blue screen '. Anyone knows what is the cause? or how to fix it? I'm quite good with going back to the old bios but do not know how or if its possible.

    Here are the bios I used:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70994

    Please help and thank you Jared

    Guessed it. I had to change the Sata in the bios to ide.

  • Lenovo Ideapad S400 Touch screen problem.

    Original title: Lenovo Ideapad Touch - Touch Ghost S400

    Hi all

    I'm tapped with continuous tapping of the touch screen of my laptop, even if no one is in contact with it.

    This often happens when I use the touch screen or leave my laptop on for too long. I tried to disable and uninstall the drivers for the touchscreen device but it keeps appearing whenever I start my PC in Device Manager.

    Someone knows how to fix this? I've already sent this unit to the service center, but the problem persists.

    Hi Vlad,

    Thanks for the reply.

    The problem persists even after installing new drivers and calibration of the touch settings, this could be a problem with the hardware. I suggest you to contact the Lenovo Support for assistance on this issue.

    http://support.lenovo.com/en_US/feedback/contactsupport.page?

    Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

  • Lenovo ThinkPad Edge 11 "screen

    Hello

    I have Lenovo ThinkPad Edge 11 "2545 - 3RG

    I accidentally broke the screen

    Now, I need to change the screen.

    I searched on screens Hosani, but impossible to find a model for my laptop
    You can use one of these screens:

    11.6 Lenovo ThinkPad Edge 11 2545 - A13

    Welcome to the community.

    If you download your hardware Maintenance Manual

    http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/75y6925_03.PDF

    Take a look at pg94, the last block of the grid. It lists the 4 numbers of room possible for your pc:

    04W1379
    04W0450
    04W0451
    0A 66647

    These can help you to source, a group of experts and other parts needed.

    the manual itself, should help if you decide to do the repair yourself.

    I hope this helps.

  • Lenovo ThinkPad Edge 15 - screen becomes black for a while when connected/disconnected.

    Hey,.

    I have a problem with my Lenovo. The problem is that whenever I have plug or unplug the adapter to my pc, the screen goes black for a second about. I don't encounter this problem before, it started to happen a week or 2 ago.

    I also put in place a video on this topic to get a better overview:

    http://Tinypic.com/player.php?v=2l9r2ts&s=5

    Any help is appreciated!

    OK, I got it fixed now. Turns out it was my old graphics driver. Just updated my driver and woila. This works. Could not even think that this would have been the problem tho xD

    So if anyone else has this problem, then try to update your graphics driver.

  • What is the resolution of the max screen with speed Port Replicator Hi (PA3838E-1PRP)

    Hello

    I have a Toshiba Portege R700 - 11 p and I want to buy a duplicator of Port speed Hi (PA3838E-1PRP), but I want to know the maximum screen resolution with ang VGA HDMI on the port replicator.

    Thanks in advance for your answer

    Hello

    The maximum display resolution depends on the laptop (graphics card) and the external display that is connected to the port replicator to Port Hi-Speed.

    The internal graphics INTEL QM57 (incorporated into the Portégé R700) overview card provides this info:
    http://www.Intel.com/products/Notebook/chipsets/QM57/QM57-overview.htm
    + This chipset supports the DisplayPort interface * with a resolution up to 2560 x 1600. +

    Therefore, check the properties of the external monitor.

  • Black Lenovo Yoga 3 Pro screen

    Hi guys,.

    My name is Lim. I have improved my Yoga 3 for Windows 10 months back. Now with the recent update of Windows 10 (called Service Pack) I was meet with a black screen whenever I have start in the lock screen, but everything is running.

    I have to close my lid and open again to be able to see the lock screen image and the sign in screen. If I restart after sign in successfully, the black screen appearing more. But if I stop the Yoga for a few hours or more then the black screen reappears.

    Has anyone else encountered this problem? What is a driver conflict problem? I'm not sure that I reinstalled some drivers, especially the driver Intel HD, but it still happens.

    Thanks in advance.

    Lim.

    Hi Lim

    Please disable the fast boot option

  • Lenovo ideapad z500 W8 screen

    Hello, I have a problem with my screen.
    It is dark, but I wear f11 and f12 brightness does not increase or decrease.
    I don't know what is happening
    Can you help me?
    use of windows 8

    Is the condition exists when you have your computer first or later?

    Found this link that relates to your problem.

  • Tecra S4: Screen Resolution only shows max 1024 x 768

    Hello

    my laptop is a Tecra S4, Windows XP sp2 and a Nvidia Quadro NVS110M like a graphics card.

    While the technical specification shows the max 1400 x 1050 with internal toshiba LCD screen resolution, windows xp displays that 1024 x 768 as max screen.

    I've updated the drivers from the Toshiba site, but I can not yet move beyond 1024 x 768.

    How can I unlock other resolutions?

    Thank you

    Manel

    Manel salvation

    I think I need to clarify something because it looks like you n t know that the Tecra S4 has been delivered with different hardware specifications.

    Contains first the Tecra S4 has been shipped with 2 different.
    It supports two different views of color TFT
    -15, 1 "(1024 x 768)"
    -15, 1 '' (1400 x 1050) "

    It seems that you have purchased a Tecra S4 model which was equipped with a 15.1 "(1024 x 768) display and higher resolution is not available!"

    Best regards

  • My lenovo g510 shows a black screen on startup

    My lenovo g510 shows black screen when I start sometimes. before that appears the LENOVO it shows black screen and crashes what will be the problem and what is the solution please tell.

    Please help me I am very worried for my laptop...

    Thank you vry much! Lenovo community is the best option to recover your problem laptop.

    Thank you!

Maybe you are looking for

  • "test has detected that your script debugger.

    Hello world. I am setting up a new test facility and the writing of my first sequence with an existing sequence of legacy code. When I run the sequence and stop on the call to the DLL and then enter in the dll and I get this error: test has detected

  • I want to spend the emails saved on a disk.

    I'm AT & T/Yahoo Mail, internet Explorer. Emails stored in folders in this system. How can I move save them to disk? Thank you!

  • can I create a pdf file that opens only with adobe

    Can I create a pdf file that opens only with adobe

  • Save for web is not defined at 72 dpi

    For some strange reason PSCC stopped to change the resolution of the images at 72 dpi when you use 'save for web' legacy. Just keep the image at the same resolution that he began.Anyone got a fix?Anyone know of a different method in PSCC change dpi i

  • Put into service Windows Server 2012 R2 takes a long time

    I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work