Lenovo ideapad z500 W8 screen

Similar Questions

• Lenovo Ideapad S400 Touch screen problem.

  Original title: Lenovo Ideapad Touch - Touch Ghost S400

  Hi all

  I'm tapped with continuous tapping of the touch screen of my laptop, even if no one is in contact with it.

  This often happens when I use the touch screen or leave my laptop on for too long. I tried to disable and uninstall the drivers for the touchscreen device but it keeps appearing whenever I start my PC in Device Manager.

  Someone knows how to fix this? I've already sent this unit to the service center, but the problem persists.

  Hi Vlad,

  Thanks for the reply.

  The problem persists even after installing new drivers and calibration of the touch settings, this could be a problem with the hardware. I suggest you to contact the Lenovo Support for assistance on this issue.

  http://support.lenovo.com/en_US/feedback/contactsupport.page?

  Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

• Lenovo ideapad Z500

  Problems of brightness with the Z500. I ran all Lenovo system checks, updated Intel drivers and Gforce, seems to be ok. But the screen of the laptop has dim.

  Isouspect this might be a problem, any ideas of economy energy please?

  Problems of light resolved, due to information below.

• BIOS problem, Lenovo Ideapad Z500

  Hello

  My problem is that my Lenovo is infected by Trojan, so I tried to reinstall it with the original disc of Windows 7.

  Next problem is that my mechanic of dvd can not read or load the installation disc.

  I also tried boot usb but the same result shows blach screen and nothing...

  So I tried the system recovery. It says this:

  Missing Boomgr

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_125037.jpg

  and the configuration of the Bios is strange:

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_120852.jpg

  and now

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_122140.jpg

  so I don't know what to do next? Everyone will help me please. THX

  Problem is in the wrong usb flash drive. Solved

• Thickness of Lenovo IdeaPad Z500 HDD; Replacement of SSD

  Hey guys,.

  I own a Z500 IdeaPad with a ST500LM012 HN-M500MBB 500 GB HDD by Samsung.

  I would like to do an upgrade with a 1 TB of HDD, I would put in the HARD Drive Caddy (replacement CD/DVD drive).

  And I also intend to get an EVO 840 Samsung SSD, I place in the main HARD disk location.

  BUT the HARD drive I have now is 9, 5mm thick. And the EVO 840 is 7 mm thick. I have problems in the main HARD disk location?

  And are there opportunities that I can fit a 12, 5mm disk in the location of main HARD drive or the HARD drive caddy?

  I'm terribly sorry for my English is not my mother tongue.

  Thanks in advance.

  medo994 wrote:... HARD drive, I have at the moment is 9, 5mm thick. And the EVO 840 is 7 mm thick. I have problems in the main HARD disk location?

  Answer: Page 71 of the Hardware maintenance manual provides 9.5 mm hdd/sdd can be used. If you have the Player 7.0 mm it can also be accommodated.

  medo994 wrote:... And are there opportunities that I can fit a 12, 5mm disk in the location of main HARD drive or the HARD drive caddy?

  Answer: For the housing of the primary hard drive, the cage hdd/ssd mounting is designed to 9.5 mm, so a 7.0 mm or 9.5 mm hdd/ssd will fit. However, a 12.5 mm will not match. The caddy, you see the caddy if it can accommodate a hard drive of 12.5 mm. You may need to check the side of the caddy against the STRANGE to see if it will fit in the odd-NUMBERED slot.

• Lenovo Ideapad z500 Shutdown of Windows 8.1 questions

  Since I installed windows 8.1 I've known issues so that the closing. It seems that windows shuts properly, then the screen goes black and it crashes for like 10-15 minutes with the leds and the fan still runs. After a while the system reboots, even when I clicked on stop. This happens to stop, restart and when he falls asleep. The only way to stop the system right now is to hold the power button and kill the power. Windows doesn't give any errors in the logs. I tried to update all the drivers, disabling quick start in power options and tried to change several power supply options. Nothing has changed.

  Could someone help me please?

  I downloaded the driver from http://www.atheros.cz/atheros-wireless-download.php?chipset=77&system=5
  And it works very well

• LENOVO IDEAPAD Z500 WIFI QUESTION

  
  

  Tiwi wrote:

• Lenovo flashing z500

  How can I fix?
  Lenovo ideapad z500... windows 8 OS.

  http://youtu.be/TQfpwJFKtmk

  Ghost141 wrote:

  The main problem isn't so HARD drive?

  Is this a sign that the HARD drive will die? I plug just this laptop for 2 weeks

  This does not happen every time, it disappeared when I restart the laptop...

  But how can I solve this problem 100%? do not happen other times...

  It's a possibility that you have a problem starting. This does not mean that the hard drive is dying, but it's just the operating system could not be started.

• Expand the partition of drive C on the IdeaPad Z500

  Hi guys,.

  I have a laptop of series of Lenovo IdeaPad Z500, that came with a 60 GB drive C for storage/parition.

  I'm running out of space and was trying to extend the partition using the tools of Paritioning but I don't get the option to extend the C drive, after creating an unallocated partition (say 10-15 GB). I try so to make my partition of the drive C was around 70-75 GB after the extension of the C drive.

  One thing I noticed that I have a score of 300 MB (approx.) just after the C drive. It does not resemble an OKR partition but another thing that I already have a 25 GB of partition OKR.

  I'm suspecting that this 300 MB of partition is coming in my way to extend the partition on the C drive, but I'm just guessing. I could be wrong as well.

  So, I'm currently stuck here and can't seem to find a way to extend the drive C partition without messing up the configuration OKR.

  In addition, I'd appreciate really if someone could tell me how to do a factory default operating system image backup, so I can't run in case my system fails to start at somepoint in time.

  When I open the app OKR, it gives me two options: backup & restore system.

  I'm also confused here if the backup of the system would make the backup of the complete (with all applications at this stage) operating system? If this is the case, then how can we restore that image in the event of a boot failure?

  Overall, here are my questions:

  #How to extend the C drive without affecting the OKR/partition configuration?

  #How to restore the backup system image (saved using "Backup system" option OKR App) when the system does not boot? I have to write to a disc or save it to another partition would also work?

  #Is there a way to default value of the image image factory so I can use it to install the new OS, in case I have problems with the operating system in the future?

  If necessary, I can share the screenshot of the partition table to give you an exact idea how my drive is partitioned.

  I would appreciate really no answer on that.

  Looking forward to hear from you.

  Kind regards

  Nick

  "Therefore, the procedure you mentioned on Page 7 of the post, I should be able to recovery of default of origin of the USB Image and not the 25 GB partition that has already been created for this purpose." Is my understanding correct? »

  Comments: The key USB OKR erase everything on your hard drive and recreate the partitions including the operating system. So, it will be as you receive your unit of Lenovo. So don't forget to make a backup of your personal files.

  "In case the OKR on laptop breaks because of the re-parititioning of the C drive, I still have the USB for it?

  What actually flash as recovery disk, if for some reason, my OS is corrupted and I am unable to start my OKR has messed up too, I would still be able to load/install operating system to factory image on my laptop? »

  Comments: In case that spoil you the partitions, you can restore to factory State (actually you can now decide what size of drive C).

• What is taken maximum RAM supported in Ideapad Z500

  Hello

  Welcome to the community of Lenovo!

  According to the data sheet PSREF Z500 your model will be supports up to 16 GB of memory.  Please see the PSREF for more information on the #109 page.  Here is the link...

  https://www.Lenovo.com/PSREF/PDF/ipbook.PDF

  A popular seller memory PC also confirms that your model will be supports up to 16 GB of memory.  Here is the link to the site of Crucial...

  http://www.crucial.com/USA/en/compatible-upgrade-for/Lenovo/IdeaPad-Z500

• Live USB of Lenovo ideapad u510 w/Fedora 19 black screen

  I'm having trouble with a new lenovo ideapad u510. I try to install Fedora 19, using the Fedora Live USB image 19 xfce spin, the player starts correctly, but when you select the option to boot Fedora 19 Live, I get a screen that is gray with a cursor at the top left, then two error messages that look almost idential to other flash each, the Fedora logo starts to load , and then the screen turns white.

  The part of the error message I got was '... ". managed to activate the AA (?) »

  I tried to re - turn on the monitor by using the function key F9 and I tried to boot from DVD with the same result. Once the screen turns off, it remains this way until I force the machine to stop. Once I forced the closure, the computer, to turn her on, past on the screen empty again without even loading the lenovo BIOS screen. Even the "novo" button does not options for me.

  My UEFI is set to Legacy / Legacy first, although the EFI setting is always Windows 8, with no other options. I looked through my settings on each tab of the BIOS and I can't find anything further to disable secure boot.

  Can someone help me in installing Fedora?

  For posterity:

  http://www.ashwinraon.com/2012/08/how-to-solve-Ubuntu-blank-screen-boot/

  http://AskUbuntu.com/questions/38780/how-do-i-set-nomodeset-after-ive-already-installed-Ubuntu

• Lenovo Ideapad U310 speaker problem

  Hi all

  My U310 of Lenovo Ideapad has had problems of speaker,

  The headphones work correctly, but the built-in speakers that are Awefully located inbetween as the hinge and the base of the screen do not work.

  I first thought it was a problem with the headphone jack that could have cut the circuit internal speaker because of the incorrect removal of the headphone jack, but it is not true because I've noticed that its a problem with the angle I keep tilt of the screen.

  On the passage of the screen at any angle above 90 or 100 degrees, the speakers cut in and are activated once its below 80 degrees.

  I'm a little worried about the words on it?

  Kind regards

  raisedadead.

  THANK YOU VERY MUCH IN ADVANCE!

  Thank you Alaa,

  The problem is now solved, mainly the mobile hinge was obstruction in fact the thread that connects the speakers, according to the service technician. Need to replace the wiring had been damaged by the hinge. A manufacturing problem small on the wire does not correctly connected to the hinge. Thank you

• Replace Digitizer Touch IdeaPad Z500

  Hi all. My laptop screen is currently heavily cracked because of my clumsiness, but I noticed that it's just the glass on the LCD digitizer. My problem is that I can't find a straight line to the top of the spare part to swap on the old cracked glass. Any help finding one would be great. Otherwise, I found the digitizer for a U350 that looks identical dimensions; would it not possible to use instead?

  Laptop is IdeaPad Z500 Touch as shown in the subject.

  Sincere friendships at all.

  Aidan02 wrote:

  Hi all. My laptop screen is currently heavily cracked because of my clumsiness, but I noticed that it's just the glass on the LCD digitizer. My problem is that I can't find a straight line to the top of the spare part to swap on the old cracked glass. Any help finding one would be great. Otherwise, I found the digitizer for a U350 that looks identical dimensions; would it not possible to use instead?

  Laptop is IdeaPad Z500 Touch as shown in the subject.

  Sincere friendships at all.

  Take a look at this.

• New Lenovo Ideapad Z710 friend refuses to install the touchpad driver.

  A few weeks ago my friend bought new a laptop Lenovo Ideapad Z710 pre-installed with Win8. I "upgraded" to Windows 7 for him, as none of us can handle the new OS. Usually, I have no trouble to reinstall the drivers after installing a new OS, but for some reason that its touchpad driver does NOT install.

  I use the official driver for his computer, apparently is a synaptics driver and it says it should work completely fine with Windows 7, but when I try to run the installation, I get the error "Synaptics Device Not Found!"

  There are a few issues that I believe are related to the driver not being installed that can tell you something. When he closes the lid of the laptop and open it again, the mouse jumps over the screen constantly, and he can't use the computer until it restarts. In addition, he cannot turn his touchpad, which I suppose is a function that comes with the driver.

  Any help or contribution is greatly appreciated, if you need more information, do not hesitate to ask.

  Thanks again,
  -Tyler

  Are you sure the touchpad isn't a Synaptics touchpad ElanTech? If ElanTech, try to uninstall the currently installed driver. Then install the driver from the website. During the installation of the driver not to put a check mark in the box that says driver Synaptics install now.

• IdeaPad S500 Touch - screen goes black after driver update

  I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo appears on the screen, and it goes black again. No matter what I try, that's all.

  Does anyone have a suggestion?

  Thank you

  James

  Hi Scoutmaster316,

  Welcome to the Community Forums of Lenovo!

  You will need to restart the system in safe mode.

  There is the only option to boot your situation is down to the system startup

  When you turn on the system, Lenovo Logo appears then black screen maybe wait a minute hold it the power button down until the accident it you must reapeat this 4-5 times until it starts to a page like this

  

  Once you have got to follow these choices that

  Troubleshooting / Advanced Option / start parameters

  Then you should rerach options with, select Safe mode which.

  If the driver is the problem, you should be able to start here,

  Open the Device Manager and rollback video driver

  Concerning

  Solid Cruver