What is the resolution of the max screen with speed Port Replicator Hi (PA3838E-1PRP)
Hello
I have a Toshiba Portege R700 - 11 p and I want to buy a duplicator of Port speed Hi (PA3838E-1PRP), but I want to know the maximum screen resolution with ang VGA HDMI on the port replicator.
Thanks in advance for your answer
Hello
The maximum display resolution depends on the laptop (graphics card) and the external display that is connected to the port replicator to Port Hi-Speed.
The internal graphics INTEL QM57 (incorporated into the Portégé R700) overview card provides this info:
http://www.Intel.com/products/Notebook/chipsets/QM57/QM57-overview.htm
+ This chipset supports the DisplayPort interface * with a resolution up to 2560 x 1600. +
Therefore, check the properties of the external monitor.
Tags: Toshiba
Similar Questions
-
What is the max memory HP Pavilion dv6 [LM720AV] can be supported?
What is the max memory HP Pavilion dv6 [LM720AV] can be supported?
CPU i7-2720QM
I know that it supports 8G (2 x 4G). I want to know if it supports 2 x 8G.
Of after Crucial, it supports 8 GB maximum.
http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv6t%20Quad%20Edition%20Series & cat = RAM -
What is the max memory for an iMac in early 2008
What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.
Thank you
John
The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).
Source:
iMac (early 2008): specification of memory - Apple Support
-
Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Hi ipitedafoo,
You can check if this article helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
See also:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
-
What is the max RAM I should update?
Hello
My system is a 27 "iMac i5 2.8 GHz with 4 GB of DDR3 RAM. Currently, I am now running Snow Leopard OS. My system has 1 CPU and 4 cores.
If I had to use After Effects CS5, what is the maximum amount of RAM I should update?
Someone told me that the max my system can use is 4 GB of RAM (which means no point me upgrading the RAM) because I have only 1 processor 4 cores. Is this correct? Otherwise, what is the max RAM I should update?
Thank you very much, really appreciate a good answer.
See you soon
Mylenium wrote that told you about your system isn't true that your system is 64-bit and 64-bit will take as much RAM you can give him and after effects CS 5 can enjoy more RAM and works better with more RAM.
Now a graphics card has in general not as much effect in improving the performance of EI, but with more VRam graphics will also help with open gl features.
It is also an option your iMac takes 16 GB of RAM so your answer is 16GB is what you need and when they update the RAM and make it backwards compatible which will help as well. So keep an eye on the future. Because 16 GB cards can now get so when they do them for theMac they might mac them backward compatible.
-
iMac G3 tray charger stuck on the gray screen with question mark flashing folder
I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.
I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.
Valid operation system not found.
Not only it primer not leave now pressed the C or
Place the cd in the drive. power off. Hold c power key on & while in the startup is underway.
Keys options,
key option is not supported on tray loading imac g3 333
In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.
It took charger slot, but I think that optional for the bin. I think that you can upgrade the firmware with 8.6 for trays.
You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.
Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:
Reset-nvram
Configure default
Reset-all
"The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »
http://support.Apple.com/kb/TS1812?viewlocale=en_US
In the case of the...
Try taking the battery for 10 minutes. Put back in the battery. Fingers crossed. Turn the machine back on.
How do I eject the cd from the internal drive:
eject the cd
List of devices:
devalias
List of variables:
printenv
-
It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?
Hello
If under warranty contact Dell
or ask in the forums Support of Dell
http://en.community.Dell.com/support-forums/default.aspx
If it is under warranty, contact a reputable repairman, local computer
-
What are the costs associated with the synchronization
What are the costs associated with the synchronization
Simple answer is: No. Cost zero.
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
What is the file brayhs with size zero?
Original title: brayhs
What is the file brayhs with size zero?
How can I clean my system (windows Server 2003) this?Run a full scan of the system and set your PC to show hidden and system files and the folder and check if there is any suspicious element or just try to delete.
-
Original title: how to find missing or corrupt files on windows xp pro
I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files? My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it
Hello
1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
2 are you able to install any other software?Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.
Step 1: Try to install the webcam software in clean boot state and check.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
My computer is having problems loading the main office. I start it up, the first black-wallpaper with the logo is displayed, then the screen goes to the Microsoft screen with the green bar of movement. After that, the Windows logo appears and makes the sound. A new screen will appear with a "start-up Fund" and he said: "Please wait...". "This form of lasting about 5 to 8 minutes, then the text disappears, with only the bottom upward. I left it sitting there on the blank screen for about 20 minutes, and still nothing changes. I tried Ctrl + Alt + Delete, and shows nothing. Finally restart manually, but the same problem occurs. The only way that this works is in Mode safe mode with networking (which is currently used). I also tried the system restore, but this does not work because by default it must go through the same problematic steps, as mentioned previously.
Hi ninja_panda13,-Remember to make changes to your computer after that this problem started to happen?As you are able to boot mode safe mode with networking, put your computer in a clean boot state in order to verify if any third-party application is causing this problem.Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
What are the security risks to open port 80 on workstations?
Hi all
in our environment, there is an application that opens port 80 on workstations when it is installed, but it is not allowed on preimeter FW
could you please tell what are the security risks for leaving port 80, opened on the workstations? or it is considered to be safe unless it is not allowed on the preimeter FW?
Thank you & best regards
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Original title: Weird problem.
My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?
Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it. At this point, I suspect something mischievous because restoration of return must be a guaranteed fix. If it worked on Friday, it should work if restore you backup on Friday.
I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.
Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).
I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.
-
I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it. I can't use my computer without losing all the data every few minutes. It is brand new. Fix? It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.
For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:
http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx
According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.
Many users report the same error recently and so far have all AMD/ATI graphics cards.
If all goes well the graphic driver update will help.
If the problem persists, consider uninstalling 2778344.
Then, at the moment, 'hide' 2778344.
Maybe you are looking for
-
[SOLVED] How can I increase the height of the tabs?
I was using a theme that has increased the height of the tabs. Unfortunately, the theme was in conflict with the menu tab setting using the TabMixPlus extension. I'm stuck with the theme by default or others who do not increase the size of the tab. I
-
Satellite P10 - repair on the recovery disc option
My Satellite P10 crashed, which suggests an error of hard disk may be imminent, I have a recovery disk, but it doesn't have a repair option, only a full recovery. As I would like to try to retrieve some data, is there a repair option, normally associ
-
100% CPU usage when playing online.
Original title: 100% CPU utilization CPU USAGE XP MEDIA CENTER SP3 100% WHEN ONLINE GAMES IS NORMAL ALSO PC STARTS TO MAKE BIG NOISE. SWEET STARS CAN GET REALLY LOUD
-
I need to configure Outlook Express to send PDF files from scanned documents.
original title: I need to CONFIGURE OUTLOOK EXPRESS ON MY EMAILTO SEND OF SCAN of PDF DOCUMENTS [IE8] KODAK TECHNOLOGY SAID I SHOULD CONTACT MICROSOFT. WHEN I TRY TO SEND SCANNED PDFS, IT IS SAID: A FEW ERRORS HAVE OCCURRED WHILE THE REQUESTED TASKS
-
Since I upgraded MSE (when I did, there was a popup telling me it had not been approved for XP) I had to do system restore because it would not be updated and did not allow me update Windows. Moreover, since the installation of a new version of CCle