Lenovo Solution Center cannot connect to the Security Server

Similar Questions

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• Cannot connect to the activation server

  I tried to allow my computer with my adobe ID, but an error message appears. The permission toolbar appears for a few seconds, but then an error message comes up saying "cannot connect to the activation server. Check that you are connected to the internet. »

  I am currently connected to the internet and that you have added Digital Editions 3.0 to the my firewall programs authorized. I use windows 7. I also tried deauthrorizing my computer by pressing SHIFT + CTRL + D.

  I found the problem.

  http://tohellmylovewithyou.WordPress.com/2010/08/05/ADE/

  Check out the link for more info

• Windows cannot connect to the updates server. & Rise of Legends

  When I try to update the game by clicking on "check online updates" I get the "Rise of Legends cannot connect to the Internet.  A firewall is probably blocking it.  to continue, network access, and then click OK. "error.

  Game has been installed on the clean Windows 7 install Service Pack 1 on a Compaq Pressario CQ5814.
  System AMD E-350 a / 1.6GHz processor
  8 GB Ram
  64-bit operating system installed.

  Rise of Legends has been installed fresh
  Version: 0.0704.1001.0000.13.0

  Checked the settings of Internet Explorer and the proxy is set to automatically detect settings.

  Trend Micro Titanium Security - legends on the exceptions list.

  Without checking all the settings for all programs associated with access to the internet for upgrades.  No restrictions occur with other programs.

  The program is on the Windows Firewall exceptions list.

  Troubleshooting of Windows Firewall detects no problem.

  System File Checker detects any missing or damaged file.

  Any help would be appreciated.

  Hello

  Run the Internet connectivity evaluation tool and check the status.

  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx

  In addition, if you connect to the Internet using a router, it can be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem.

• View the connections of the server to connect to the Security Server 5.2

  So, I wonder if it is anyway possible to not expose a subnet of office to the DMZ during the deployment of a security server?  I think remember me, there was a way to have the tunnel of security server all traffic through the connection to the server, but for the life of me, I can't seem to understand.

  Even in your previous PoC you should always have allowed some ports (PCoIP, RDP if use you it and the frame channel) from the server security for virtual offices. This has always been the case.

  The role of the Security Server is to protect exposure of desktop to the Internet. It provides a monitoring of protocols of the Internet (for example PCoIP) so make it succeed to check if the traffic is in the name of an authenticated user, and to ensure that if it is valid, it is transmitted over an office whose user is authorized to access. It is important to configure your internal firewall so that Office (PCoIP etc.) protocols can come only security servers. Then you give the required insurance. If such packets only packets UDP PCoIP arrive in your DMZ that are not on behalf of an authenticated user and then they are ignored in the DMZ without ever be passed in your data center. You know that all protocols for virtual desktops have been validated by the Security server.

  The Security server should also communicate with the login server and that's why you should also allow JMS, AJP13, and IPsec through. These should be only to the servers again only from servers to security and connection.

  You can always route the PCoIP packages through a proxy in your data center, but the security required inspection happens before that the Security Server so that eventually they can be thrown into the demilitarized zone.

  Mark

• Xperia SP C5303 after 4.3 update cannot connect to the proxy server where I have no proxy

  I did the upgrade and now I can't use all the google apps, more a few others and the message is that I am unable to connect to the proxy server where I have no proxy server. I have just a modem normal wifi Adsl.
  It happens also in 3G. I can't download new internet settings if it is of no use.
  Any suggestions? I'm not a guru of Android so please try to help?
  Apps not working not are Facebook, YouTube, Twitter, Chrome, cards, play store.

  I found the solution. Start the PC COMPANION and find REPAIR that will install the UPDATE again (just follow the instructions) I hope that this time will be better. Worked for me and now mobile is allowed. A factory reset only I believe.

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• My adobe program tells me that it cannot connect to the DDE server?  What is my ISP or what?

  I try to open a PDF doc and my adobe program tells me that it cannot connect to a DDE server?  What is c?  I tried to download Acrobat Reader again and still get the same message.

  Arlene, isn't Adobe Customer Service, but a user to user forum. What you received was for free assistance from another user.

  And if your question has been answered, could you please mark as answer?

• Lenovo Solution Center: Local Connection Test: WARNING

  Hi, I'm getting a connection test local warning when the solution center of Lenovo runs a hardware diagnostic test. How to solve this?

  Hi thanks for the reply. I solved the problem. I use a wired connection and had no WI - FI enabled when you run diagnostic test. Turned on then ran test and everything is fine.

• Client cannot connect to the ESX Server

  I have 3 Server ESX 3.5 update 2. I can't connect to them using the VI client and I can not navigate to the IP Address of the server. I can telnet to the port 902 and 903 but not 443.

  The guests are working well.

  When I use the VI client I get customer VI could not establish the initial connection with the server. Details: a connection failure has occurred.

  Could someone tell me what command should I enter to start the service 443 or anything else, I need to check?

  Thank you

  See this KB http://kb.vmware.com/kb/1003561

  If you can access SSH to the host in question, reboot pass can fix.

  the type of service console:

  service mgmt-vmware restart

  If this device or any other response was 'useful' or 'proper' Please consider awarding points

• Cannot connect to the lIveCycle Server

  Hi all

  I installed LiveCycle Server and LiveCycle Workbench on separate systems. LiveCycle Server is on Windows - 7 machine and Workbench is on the Windows XP machine. It worked yesterday.

  But I don't know what went wrong. Today when I tried to connect to the server through workbench, it displays an error that can not connect to a server.

  Any help would be greatly appareciated.

  Thank you

  Sidonie.

  Yes, I managed to sort. There are a few network issues.

  Sidonie.

• FRM: 41213 cannot connect to the report server

  Hi expert,
  
  When I try to click on the button, I got this error... FRM:41213 unable to connect to the server reports and then another browser open and display... oracle reports: REP-51002 error: link to my_server of report server has failed.
  
  before I got this error message I just create a form and reports only OC4J instance is running. and then, add the code to a button.
  
  I think I have to miss another instance to run or set. Please I need your help... Please give the step by step procedure how to fix this...
  
  Thanks /.

  Hai,

  If your issue is resolved then mark it, or post the questions.

  Manu.

• error code: err.avg.pop3 proxy server cannot connect to the mail server. port110, secure (ssl): no.server error0x800ccc90, 0x800ccc90 error number

  Get this error when you try to send mails. Outlook express

  AVG is the cause of this error message. Try to disable mail scan in AVG and see if that helps. (Tip: AVG is causing more headaches with each update.) You may want to consider another AV program is more compatible with Outlook Express). Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Cannot connect to the VMWARE SERVER

  Hi, I can't connect to my server vmware via web interface or via the console. It gives me this: vmware-authd: 501 command Global GLOBAL no target host agent server [/ code] any help?

  There are a few errors in the log.  I suggest you reinstall vmware server to make sure that there weren't any failure during installation.

  -KjB

  VMware vExpert