Lenovo Thinkpad problem w 540 when starts

Similar Questions

• ThinkPad problem power S1 Yoga starts

  I have this ultrabook 3 days. Now it used to boot. After pressing power button the power led is on for 3 seconds, then left. Some knows about what some can help me with this. Thank you!
  PS I tried all reset options, but nothing helps.

  It is resolved by replacing the motherboard

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problem installing Windows 7 on Lenovo ThinkPad Edge 13 665D817

  Hello

  I have a Lenovo ThinkPad Edge 13 665D817 without an operating system and be able to install Windows 7 Professional 64-bit (msdnaa version). I actually had the Thinkpad even before and managed to install Windows 7 withouth any problems.

  After starting from the USB stick during installation without hard drive is located. To this end, I insert a second usb key with drivers for AMD AHCI Controller Device Driver for Windows 7 and select the directory of win7 64 bit. A driver to install is offered, but after installing it, it seems as if nothing happened. No disk is detected, and I can't continue the installation.

  thx for the help

  (by the way, the proposed here spell check does not recognize "Lenovo" - * lol *)

  I saw this happen occasionally during installation via the USB port. In my experience, it is when a USB 3.0 or eSATA/USB combo port is present. It does not occur if start you it from a Windows existing, nor happens during the installation of optical media.

  There is something that includes ImageX that you can use to install Windows, but that gets a little complicated.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Lenovo ThinkPad won't start

  Hello, I'm having a problem with my Lenovo ThinkPad T520 running Windows 7 Professional 64 - Bit. It has a processor Intel Core i5 vPro 4 GB of RAM and a 500 GB HARD drive. It worked fine up until this point. Here is what happened.  It started when I was surfing the web tonight and it froze. I could not click on the 'X' button, use Alt + F4 or Ctrl + Alt + Delete. So I decided for a difficult start. I pressed the power button until it stopped. When I start again, it froze on the Windows splash screen. I waited for about five to ten minutes and started hard again. This time he asked me which option to start, I wanted to use. Start Windows normally or something like return on error. I tried the error recovery option but it was without result. I started again and it froze again. She is still ongoing now. Need help, tell me what I need to do. I hope it has nothing to do with the material because the PC belongs to my work. >_

  Regardless of the fact that he belongs to my work, I am a system administrator.

  You are a system administrator of employment in question of title?  If so, you must solve the problem.  :-)  Or you are just an administrator on the system in question?  Having administrative rights does not make you a sysadmin by title.  * smile *.
   
  No offense meant, but the wording of your question was more like an end user explaining what a system administrator explaining.
   
  You can start safe mode?  If so - how does it work?  You can start using the safe mode with networking?  If so - how it works in this mode?
    
  So you're saying that nothing has changed between her works and does not other than gel?  No updates, no new hardware or software installed, etc.?
   
  Have you tried to use the system restore to go back to a point before the system had problems?
   
  Can you use a Ubuntu boot CD and run it from the CD player to see if the machine starts like that and be usable?
   
  You have the media/method of system recovery in mind and you have a backup of the data, you might need the machine (or a method in place, if you are a system administrator, in order to safeguard a complete system so that you can extract data from such backup after a recovery?)

• Battery Lenovo Thinkpad Edge 13 (0217) problem

  Hello guys,.

  Because I couldn't find a solution for my problem, I decided to write here, hoping that someone (by a team from Lenovo or users) have the same problem and therefore can help me.

  I have a Lenovo ThinkPad Edge 13 model (version 0217). (I bought from a friend, because he didn't deliver more when I decided to buy it.)

  I have problems with my battery. The design of this capacity is 62.12 Wh, I used it wisely, so it was not always charged to 100%. I always unload down around 5-7% and then plug the power adapter. (See image).

  

  My first problem is that during the last 3 months, the capacity is down to 45,88 Wh and I can't really understand why. This can be a generic problem with the battery?

  My second problem is - for which I found another topic here, but it did not help me - that when I charge the battery, stops at 99% of load, showing "3 minutes is remaining" and if I disconnect and reconnect the adapter, it stops like 99% saying have completely loaded. In the battery maintenance, I changed the settings to "always fully charge' Custom, but still, it won't charge the battery fully.

  

  My third problem is that I have updated the BIOS of my laptop a few days ago, and when I try to search for an update of the firmware battery or when I do a battery meter reset, the system shuts down suddenly without any warning or something else.

  I would be really grateful if someone could help me with this, I like really my laptop but it really bothers me...

  Thanks in advance.

  (1) so that you must have used it a bit and then, under the charge cycle is at 234.

  (2) don't know, but sometimes my battery the fact.

  (3) download HWinfo32 and check your system temp, and what temperature your CPU is.

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem

  Hello

  When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

  Can you help me

  Thank you

  Original title: Cprogram

  Hello

  Method 1:

   I recommend you put the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lenovo Thinkpad t500 - Thinkvantage Fingerprint Software and driver for the fingerprint sensor problem

  Dear Sirs,

  I have a Lenovo Thinkpad T500 with Windows XP Pro SP3 FR, I reinstall. in this notebook, I also have Sophos Safeguard Enterprise 5.50.1 installed that is compatible with Thinkvantage Fingerprint Software 5.8.5.6014. The problem is that I can't find driver for the fingerprints (authentic Tec Inc. AES2810) sensor.

  Can someone help me looking for a driver for this device, or where I can download it?

  Thanks in advance and best regards,

  F. Paulo Pinto

  I assume you are using XP 32 bit?
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70598

• Hello, everytime I open a new document in Illustrator I load a list of about 20 colors was not carried me. If there is no problem don't delete start of work pq without samples. But when I open a new document is loaded me colors. What does take to re

  Hello, everytime I open a new document in Illustrator I load a list of about 20 colors was not carried me. If there is no problem don't delete start of work pq without samples. But when I open a new document is loaded me colors. What needs to be done to remove and they do not appear by default when you open a new document?

  You should review the new Document profile, you use the most. It is just a file AI that you can modify as you wish and save for future use.