"Lenovo USB avdio" drive installation of drivereasy

Similar Questions

• Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk

  Hi all

  I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.

  As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.

  Thank you.

  Hello

  This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/

  As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.

  Replace broken laptop optical drives is not too difficult, you can see this as another option.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• EzCAP 116 USB 2.0 TV USB EMPAudio driver installation error.

  Just installed the drivers for a 2.0 ezcap USB video capture device and also the Arcsoft showbiz software. For some reason any my laptop does not recognize the driver audio 64-bit when I plug the unit gives a driver error audio ezcap 116 usb EMP. Fine video drivers

  When I try to capture the video, the software does not record sound and given no chance to change source resulting in a painful white noise that is emitted.
  Tried to re install the drivers and using another USB port with the same result.
  I have a laptop vaio Windows 7
  any ideas?

  Hi RickRoe,

  It seems that you are facing problems with video capture using EzCAP116 USB 2.0 Video Capture.

  I suggest you to consult and follow the steps from the link EzCAP116 USB 2.0 Video Capture Support and check if it helps.

  http://www.ezcap.TV/EzCAP116-drivers?ZENiD=5vbs59qnd75j8gph0ah03uc635

  For reference:

  http://www.ezcap.TV/Forum/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Prevented by a group policy for the new usb keyboard driver installation

  Try to install the new keyboard (USB) but get the "group policy has prevented these drivers to install" or which nearby. No matter how lucky it is a value for default "Group Policy Editor"or a repair/reinstall of windows will do? ".

  Lee

  Which edition of Windows 7 are you running?

  If its Windows 7 Professional, Enterprise Edition or Ultimate, try the following:

  Press Windows key + R on your keyboard.

  type: gpedit.msc

  Press enter on your keyboard

  ---------------

  Under Computer Configuration, expand Administrative Templates

  Expand Windows components

  Select Windows Installer

  In the right pane, select "Disable Windows Installer"

  Double click on it

  Make not configured is selected, and then click on apply and OK

  Exit group policy

  Restart your computer

• WinXP not reading USB floppy during installation (F6). Cannot install the ACHI storage controller driver.

  I bought a 3000 N200 with Win Vista Basic. His is not illegigble for a decommissioning of the plant, but apparently it's possible.

  At the beginning of the XP installation after you press F6, everything seems very well, that the floppy drive is read I can select the appropriate driver and program installation continues...  Drunk when the installer is ready to copy files to the hard drive, Setup stops and asks the "Intel Matrix Storage Manager" diskette in the A: drive.    The thing is that the drive is still in the floppy drive. It's as if the USB floppy drive is not connected.  What's wrong?

  I've done the disk several times different. I unplug it and re - insert the USB key.

  I can't disable the ACHI and run the XP installation very well, but the ACPI driver (or something like that) is installed.  Later, during the loading of software the program WinDVD from the Lenovo Web site does not recognize the manufacturer and stops.

  Help, please...

  nLite is my Savior. I've not finished installation, but once the installation program only is complaint not only no hard drive was present, I think that I am free to hone. I just included the AHCI driver in nLite with the chipset drivers and it seems to work...

  Later I'll post the final verdict...

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• HP PHOTOSMART 4795: Photosmart 4795 Driver Installer - USB Hardware/Software not found error

  Im running on an Imac bootcamped with win7, downloaded the driver on the site of hp directly support, and this is the first ive problem in a year and a half. Setting im here looking at my device driver details, all this so far and active, and still refuses the installation. I tried, futile full, contact any staff on the issue, and this is my last straw, so to speak. I am a student and I can go without a printer works at home any longer. The error reads as follows:

  -------------------------------------------------------------------------------------------------------------------------------

  HP - Photosmart series C4700

  Results of system requirements

  This computer has been verified to the system requirements to install this product.

  [X] this system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

  Requirement

  USB DRIVERS

  Details and advice:
  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  USB DEVICE

  Details and advice:

  This computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  -------------------------------------------------------------------------------------------------------------------------------
  The help button next to "Retry" in the lower left is grayed out, and the options 'Back' & 'Continue', leaving only "try again" or "Cancel". There is no error code, no other signifiers that might lead me in the right direction.

  Please, any help or speculation is welcome, I'll try salt and wise at this point. And thanks in advance.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Lenovo USB keyboard - Trackpoint/Touchpas does not

  Now, I'm having the same problem in Win7 that I barely got away with Vista.

  The problem is the following:

  -J' have the Lenovo Trackpoint and Touchpad (wonderful) built-in USB keyboard.

  -When I installed this keyboard on Vista it worked out of the box, but in Windows Update, I got an update recommended for newer drivers or better.

  -When I installed this driver, the Trackpoint and Touchpad stoppet work - so I had to restore my system and to hide these updates in Windows Update.

  -So when I install Win7 RTM these drivers seem to install with the system and therefore the Trackpoint and Touchpad on my external keyboerd does NOT work out of the box. I don't get updates to make this.

  I tried solutions:

  -J' tried to install the drivers from keyboerd.

  -The driver with quick access keys installs fine, but does not solve the problem.

  -The standard keyboard driver will not install because it says I have there is a newest Synaptics driver which had to be removed first.

  -Well, there is no Synaptics-drivers installed to remove - probably because these drivers are installed with the system.

  -J' also tried to Devil driver PS/2, etc., but nothing works.

  --> So, I'm really stuck with my wonderful Lenovo USB keyboard without being able to use the Trackpoint or Touchpad. The worst though is that I know what to do the problem, but don't know how to fix...

  Can anybode please help, I can't believe I'm the only one having this problem (in Vista or Win7).

  Henrik

  
  

• USB does not work with flash or usb HD drives

  Lenovo T60 with XP Pro. USB flash drive appears in my computer, but must be formatted. If I click on the message in the format software generats the reader would noy be formatted. In properties-> volume are not met. If I click on fill to field will fill with the correct information. After OK everything will be gone. On an another identical T60, everything is OK. In the Manager of-> / place - >... it shows the correct information, the disk is online. Change the letter has no effect.

  With USB HD even more interesting. A (350 GB) HD looks like 3 disks: 2 small HD and one HD unallocated. Yet once, it looks like 1 hd if I connect to other computers.

  Mouse and keyboard work fine.

  I cleaned the reg. for usb devices. After that, if I insert the USB XP key will be detected and will show message that new hardware installed and ready. However, it does not work as I described above.

  I appreciate all the comments

  Hmm,

  In this case I have to reformat all of my usb drives and usb HD even all of them are OK if I use other computers. I'll try it, but this isn't a solution. USB is not a big problem, but what is on USB HD?

  Yes, I get you. Try it on the USB first just to see if it solves the problem. The question is of course with the Windows installation and how it's the disc but, re-setup of can not solve. This way if you still experience the problem after formatting the flash drive you will be one step closer to understand the issue.

• NB100 - How can I reinstall OS from USB flash drive

  My laptop TOSHIBA NB 100 has no CD-DVD player.
  Operating system is Windows XP Home SP2.

  Operating system won't start.

  Laptop start not at all so I can't run any kind of test when I turn it on.

  The thank you screen come on it says launch safe mode, the networking of safe mode, safe mode comand prompt or start windows normally. But no matter who I chose, that it does not start it only goes to Windows and looks like its starts but then shows the blue Windows screen & stays there.

  So I want to reload Windows from my USB flash drive.
  The BIOS boot sequence is the USB HDD - FDD - FD - CD memory.

  What are the steps for loading Windows USB flash drive?

  If that does not work then I want to connect another laptop with Windows CD in the CD - DVD drive laptop.
  Will this work? The laptop will use the Windows CD in the drive of the laptop to load the operating system?
  How to make this connection?

  Hello

  You usually have an external USB CD/DVD drive to boot from the Windows XP disc or the Toshiba recovery disc.

  But there is a method that allows you to install Win XP using the 2 GB USB key.
  This is possible because the NB100 BIOS supports booting from USB key.

  Pease check this Web page:

  + Installation of Windows XP using a USB Flash Drive.
  http://www.pctipsbox.com/Installing-Windows-XP-using-a-USB-flash-drive/

  Hope it could be useful.

• Is it possible to recover it via a USB CD drive?

  Hello

  the original cd/dvd on my laptop drive is broken, so my question:

  is it possible to do the recovery via a usb cd drive, I tried with a windows cd regular and that worked, but now I wonder what to expect from the recovery cd

  one more thing, the laptop is re-installed once at a computer store, but I don't know if they used the recovery cd, but I guess not...

  is it still possible to make a recovery, or should I use some sort of thing hard disk which is cleared by this custom installation. because I don't know if all ghost files are on the dvd collection and I so don't know what

  Thank you very much!!

  No, certainly not possible.
  It is not possible to boot from external USB drive.
  As far as I remember most of the laptops and the BIOS supports a booting from USB - FDD / LAN / CD and HARD drive.

• Satellite M40-237: CD Boot does not not + is possible startup USB key drive

  * Model: Satellite M40-237 (PSM40E) *.

  I decided to reinstall windows, my hard drive is now formatted. So as usual, boot from the Windows CD is necessary to start the instalation but it does not start. I never had problems like this, always worked boot. It's as if there is no bootable CD in the drive (but it is bootable and it works on another PC).

  -J' have the latest version of the BIOS
  -The BIOS detects the optical drive and everything is ok, HARD is the ODD main drive is secondary
  -J' tried selecting the boot priority, with F12 and/or the BIOS setting but it works anyway

  What could be the problem here? Drive does not properly (hopefully, that and not something worse)? I had some problems with the drive I have (...) before, but it reads the disc normally and as I said start was working fine before. I cleaned the lens a bit, disconnected it and it put. Is there something more, what can I do?

  I'll try to find someone who has the player that fits so I can try with that one, but who knows when is what will be.

  Now, here's the second question, which I've linked to this. Because my laptop is practically useless now (I can't install anything), is it possible to boot from a:
  (a) optical drive USB external
  (b) USB flash drive

  BIOS on this laptop has no USB boot option, it has HARD drive / CD / floppy / network. But I red somewhere this FDD = USB legacy emulation is enabled.

  If that is correct, I should just plug in the USB key and select FDD as boot option? If I can't find a USB optical drive, I thought make it bootable USB flash drive and copy the installation of windows xp on it. So once it starts in DOS I start just the installer from the key.

  TNX

  First I must say that the initialization of memory flash USB (USB key) is not possible and you shouldn't t waste time to try this.

  With regard to your reader of CD/DVD boot problem
  Well, it s really strange, it sounds a bit like a sort of master/slave/c-salt settings problem. But generally, you should get an error IDE (#0 or #1) if one of the devices (ODD or HARD disk) would not be recognized?  :|
  This whole thing seems mysteriously
  There may be a firmware issue

  Several months ago a friend of mine was not able to boot from the CD.
  He went into the BIOS and set the BIOS default settings.
  This has contributed to

  This is a suggestion, but I'm really putting t know if it helps.

• Satellite L675 - 11 H - cannot access and/or played on USB flash drive files

  Hi all

  I recently bought a Toshiba Satellite L675 - 11H and tried to transfer files from a USB Pendrive on my hard drive from Toshiba. The files were already transferred from my old laptop (HP - XP) on my USB flash drive.

  Unable to access the USB flash drive to any of the USB ports that I connect my new laptop flash drive. What could be the problem here? Thank you for your help or tips!

  Hey Rush,

  Can you post more detailes about this behavior? What happens if you connect your laptop HARD drive, you don't see that Windows installs the drivers for the new USB device or do you have an error message? If you have connected the USB check of Windows disk management if she s recognized there (Control Panel > system and security > administrative tools).

  Have you tried other USB devices such as USB mice? If they don t work too the problem might be connected to the USB ports. In this case, you must delete all the USB ports on the Device Manager and restart your laptop. Also the chipset driver update might help.