Lenovo Y430 Windows XP installed, keeps hanging

Similar Questions

• Windows Photo Gallery keeps hanging!

  It just started with me after only a few updates last couple weeks for my Vista Ultimate (x 64) SP2. I'm getting this hanging just after I have try to open any image - not always - but too many times, it will be pasted the whole PC and hang every step inside, especially the explorer.exe. I tried to close and reopen the Manager tasks, but who was worse and not help and sometimes even stuck mouse moving.

  The main solution to this problem is simply by clicking on the small button of my camera. IT IS REALLY BAD, MORE TIME I LOSE MY FILES.
  So, what would be the solution for this. BTW, I have another PC in Win7 having the same problem. Yes IS THERE ANY DIFFICULTY for this please!

  Best regards

  Hi FloatBird,

  ·        Is the computer on the network?

  ·        Do you remember all the recent changes on your computers before this problem?

  ·        What happens when you try to open the Gallery Windows in safe mode?

  ·        What has been the result of clean boot?

  Windows 7 uses the Windows Photo Viewer.

  Check if there is no error message or error code in the event viewer. Link, please refer to:http://windows.microsoft.com/en-us/windows-vista/What-information-appears-in-event-logs-Event-Viewer

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer box keeps popping up.

  Everytime I turn on my computor windows box install keeps popping up in the center of the screen.  I hit Cancel in the box and he goes and then immediately appears back, it's at least ten times before stopping.  Then, a few hours pass and it will do it again.  I'm not very computor savey, and I don't know what this means, but it's very frustrating!  If I hit ok in the box, it tells me that the progrem is on some discs for it please put disk and press ok, please help!

  Hi Groceryman,

  Thank you for using answers Forum.

  I suggest using the Installer Cleanup utility.
  Here is an article on this subject:

  http://support.Microsoft.com/kb/290301

  Give that a try and let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install windows 7 on a new laptop comes with windows 8 and keep 8

  So I just bought a HP Pavilion g7 that's installed with windows 8. I want to install windows 7 and keep 8 so I don't lose the ability to use 8. short of wiping the HARD drive, how can I install windows 7 next to windows 8 and dual boot?

  Hi mikerob1976,

  I found this post on the forums of Windows which gives details on how to do it. http://goo.GL/zYJTc

  Take a look and let me know if that helps.

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• Windows 8, windows install keeps flashing on the screen several times only WILL NOT STOP

  Hello

  I'm having a weird bug, that I have not met before with windows install.

  I tried to install a version of MS Access 2000 Runtime on my machine to windows 8 dell inspiron 660. (The company I work again to use access 2000 Apps)

  The installation failed and basically the planted program without completing the installation.

  Immediately after what happened the windows Setup window started blinking on the screen very fast.

  I tried a system restore, the program Microsoft 'fix - it' (do not do anything), and I have restored the registry from a backup without success.

  The ONLY medium to stop flashing windows setup is to stop the windows service install, but when you start to use the pc new installer windows itself will start up and the flashing continued.

  I can't find a way to disable windows full installer (apparently windows 8 will not let you change the start type services.msc )

  Dell technical support was also no help because they wanted me to pay the money even if its in warranty.

  I'm thinking really just install xp on it and be done with this...

  HERE IS A VIDEO OF THE PROBLEM

  https://www.YouTube.com/watch?v=LHS1ELw3Olo&feature=youtu.be

  Help, please!

  Hello

  Please keep us updated.

  I understand that the Windows 8 bootable USB device is not detected during the execution of refreshment in the computer.

  You can check the BIOS for the boot priority setting if the USB device is enabled or not. Check the steps in the manufacturers Web site to change the priority of the computer starts.

  If this doesn't help, you can try to re-installation through the disk or media that you have, otherwise follow the link below.

  When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in links for the re - download to your computer.

  Also check out the links below:

  http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• attempt of deleting files and windows install keeps coming back

  When I right click on a file to remove (or see properties) a windows installer box and after a minute the menu (?) right click happens.  With the help of Windows XP Edition family

  Hi Spine09,

  1. What is the exact message that you receive?
  2 does this problem occur when you access all the files?
      
  Method 1:

  First check the application in safe mode.
      
  Reference:
     
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2:

  If the problem does not happen then, try the clean boot.

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Method 3:
        
  To solve the problem, I suggest you to reregister the Windows service install.

  a.Click on start
  b.Select Run
  c.In the "Open:", type cmd
  d.Click OK

  A MS-DOS command window will appear on the screen with a cursor blinking on the command line. In this window, you will need to do the following:

  Type msiexec /Unregister and press enter
  Type msiexec/regserver , and then press enter

  After you run the second command, you will be a new line ending with> and a blinking cursor. When you see this, you can safely close the command prompt and check if the problem is resolved.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows 7 install hangs at 89% during the expansion stage of files

  I searched the Internet for the same problem and I can't find a definitive solution or cause for this.  It must be the worst installation experience ever!

  I have a 9 year old office computer running Windows XP Pro with SP3.  The specifications are the following:
  Processor 2.0 GHz of AMD Athlon 64 (32-bit)
  3 GB RAM
  1 GB videocard ATI (Radeon HD4650)
  200 GB IDE drive (SATA drive died a year ago)
  Sony DVD - RW drive
  There is no floppy drive on this desktop computer

  I decided to do a clean install of Windows 7 on it, I could test VS2012 and office 2013.  I installed the Windows 7 Upgrade Advisor and everything checked very well for compatibility.  I have downloaded Win 7 Ultimate x 86 with SP1 from the MSDN site, formatted the drive and installation.  He stopped at 0% a couple of times saying: "Windows cannot install required files. The file may be corrupted or missing.  Make sure all files required for installation are available. and run the Setup again.  Error code 0 x 80070015. »

  Then I downloaded Windows 7 Ultimate x 86 and burned another DVD with verification.  I tried with this.  Formatted the drive, deleted the partition, created a new partition and created the 100 MB system partition.  This time he went to 89% before launching the same error: "Windows cannot install required files. The file may be corrupted or missing.  Make sure all files required for installation are available. and run the Setup again.  Error code 0 x 80070015. "It does not get stuck at 89%, it reached 89%, stays there for a minute and then this error message.

  I gave up and I'm back to install Win XP on it, which took place without a hitch.  What is it?  Too old hardware?  Therefore, shouldn't the Upgrade Advisor say before you say it's just good install Windows 7?

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, you have problems with the Installation of Windows 7 with error code 0 x 80070015.

  Error code 0 x 80070015 refers to a device not ready which would normally be on the DVD player.

  It is perhaps simply that the installation DVD is corrupt somehow or that the download of the. ISO is defective somehow. Worst case would be a material faullt.

  You can try to re-burning at 1 x speed to fork the best chance to burn correctly, or maybe upload again.

  If it is an option for you, the other options are the use of a USB key to install from-

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  Meet us if you experience any problems during the Installation of Windows 7 or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• 80 - Lenovo Z50 Windows 7 downgrade possible?

  I considered buying a Lenovo Z50-80, but I wanted to know if it was covered by the decommissioning process. I would rather it downgrade to Windows 7, & I know it's only possible with Windows Pro 8.1; but I didn't know whether or not the Windows 8.1 version that comes on this laptop is the Pro version?

  sadpanda284 wrote:

  Where is the 2nd part of my question? Wouldn't it be prudent to say that this device has at least 8.1 Windows Pro installed, so that he would fall in this agreement "helped downgrade" if they get drivers out there for it? I've never seen a PC labeled as having Windows Pro 8.1, 8.1 Windows only; so, I wasn't sure whether or not all versions of Windows 8.1 are considered to be 'Pro' version.

  Three links you provided give their card or product detail 8.1 Win. It does'nt State Win 8.1 PRO. So I would guess like most units sold it is only version 64 bits not PRO Win 8.1. Why not give these sellers call and lay it on customizing the plug particularly operating system to win 8.1PRO?

• Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Hi guys,.

  My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Its not reading any cds/DVDs.

  Please could you help me how to fix it

  Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

  Mine is under WIndows Vista SP2

  I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

  Please someone help me how to solve this problem.

  Thanks in advance.

  Kind regards

  Rambeau

  ++

  @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

  You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

• How to upgrade Lenovo Z500, windows 8, Windows 8.1

  I recently updated Lenovo Z500 Windows 8.1 but I have to reset and return to windows 8, not updated correctly.
  Can someone let me know how can I update windows 8 to 8.1.
  Should I uninstall some programs also before you update or install drivers windows 8.1 before update of windows 8 to 8.1

  Umang says:

  Can someone let me know how can I update windows 8 to 8.1.
  Should I uninstall some programs also before you update or install drivers windows 8.1 before update of windows 8 to 8.1

  Hi Umang,

  Read the first post and the information here:

  http://forums.Lenovo.com/T5/Windows-8-and-8-1/list-can-I-upgrade-to-8-1-compatible-models-and-possib...

  Inslall 8.1 Lenovo drivers before spend you 8 to 8.1.

  See you soon

  DragonRider

• CD rom does not appear in the start menu in lenovo G500 windows 8

  Hello
  I want to format my lenovo G500 windows 8 and install windows 7 but I can't because the CD rom does not appear in the start menu

  Hi obaid, welcome to the forums.

  you will need to change some parameters in the BIOS, these changes are explained below related to the thread.

  http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/downgrading-from-Windows-8-to-Windows-7-on-Len...

• Auto install keeps do not... (KB2572073, KB2633880, KB2518864)

  original title: Auto install keeps do not...

  I got a shield of automatic installation on my computer all day, every time I press it and the installation of departure that it passes through all three steps and then it appears still once, I tried windows fixit, and although it detects and repairs the fault, the installation screen appears again a few minutes later.

  Any ideas on how to solve this problem?

  This is info from the installation:-a security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)

  Thanks in advance, Marc...

  Hi mad

  The problem with the updates be revived and showing as comfortable has been resolved on 5/23. If you do not already have it, reinstall updates

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.