Using administrator doesn't work does not correctly?

Similar Questions

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• Yahoo Mail doesn't work does not correctly

  I have the latest version of Firefox, which is OK and an older version that has problems with Yahoo Mail as well.

  Firefox 3.6.12 used to work with Yahoo Mail, but no more so there must be Yahoo which is something wrong and I do NOT put to level anything on this old laptop!

  Yahoo Mail simply does not work right. I try a NEW mail and there is no message body. Look at a mail only shows the header. IE 6 still works, but ILS (Yahoo) says that I need to improve - NOT!

  I have a newer netbook with VISTA (ARGHHHH!) and Firefox 7.0.1 and everything works except for a few glitches in the Add-ons.

  I'm seriously sick of UPDATES that don't work right! My netbook has had three versions of Firefox and other improvements for VISTA and things just work. And my laptop... too old for the new; Windows XP and VISTA or Win7 worked are the SHIT! And now that Apple ripped the heart of Motorola and Intel and Windows compatibility-highlight... ARGHHHH!

  Hi, Caltrop, based on what I read, I have a similar problem. Can you elaborate on what you have done to remedy this? I consider myself a technophile junior but was not able to decipher what you were saying. Perhaps to explain as I am a child could help make it easier for me to see your step by step resolution. THX!

  After checking my addons & plugins I noticed that I don't have this AdBlocker Plus, you speak of. Does make a difference in correcting mistakes?

• Satellite L40 - 18W PSL4CE - while charging the Touchpad doesn't work does not correctly

  Hi all..

  I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...
  Recently, my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter...
  My touchpad does not work correctly...
  That is to say... If I work with baterry the touchpad works very well... If I connect to the AC adapter the touchpad works not properly but the external pout works well.

  Please help me...
  Thanks in advance...

  > Recently my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter my touchpad is not working properly...

  Using the power adapter Toshiba original and recommended?
  In my opinion, the issues could be linked to the new Ac adapter and may happens with an adapter not entirely comatibel AC

• Ctrl key doesn't work does not correctly

  Hello

  I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

  Hi riggy69,

  Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

  Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

  Thank you

• PrintScreen of Windows 7 doesn't work does not correctly

  Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years.  There should not be anything wrong with the copy of Windows, it is not a debug or whatever it is, it's just the regular retail copy.  Almost everything works fine except for a few small quirks/bugs.  First of all, I can't preview images using the Windows Viewer, it displays simply all the rectangles fully black images.  However, if I open an image to preview in Image Viewer, and then click full screen/slide show then it displays the images as should be in full screen.  And then exit fullscreen Gimme the picture in black and white.  Not a particularly serious issue just annoying really.  In addition, perhaps in relationship I guess, I recently discovered that my Windows PrintScreen does not work.  When I hit PrintScreen, or any variation of the PrintScreen key combination, it captures just a large black rectangle, as if my entire screen showed only in black.  I tried to paste my Clipboard into Paint and Photoshop and both give me a black monitor rectangle size, it's really weird.  I even tried a third-party screen capture software and it's the same thing and I can't find anything even close to relevant on the internet.  Anyone have any ideas, anything is appreciated.

  Another separate problem: when I turn on my computer, it will sometimes, not often but enough times to be meaningful, decide to not turn it on and recognize my keyboard and I have to restart and I hope that he do it again.

  Last thing, I swear (I should probably do different missions).  My computer, as in my windows, does not sleep properly.  Sometimes, he won't in the mode 'sleep' and every time I try and wake him up it gives me a white, white I think, screen instead of the login screen.  If I press space to unlock my computer, because there is no password, it will take me on my desk but he will not recognize my internet connection ethernet or my desktop speakers and I have to restart my computer to get these features.  Once again a lot of what I think are really weird problems.  Any ideas on any of my problems is greatly appreciated.

  HI -.

  Run the Windows 7 Upgrade Advisor to see if any conflicts are listed:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check the support site of your system manufacturer for a BIOS update and other updates to the device driver for Windows 7.

  Kind regards...

  jcgriff2

• Files recent Photoshop doesn't work does not correctly (PS cc2015)

  I really enjoyed the new thumbnail view of recent files in PS, but his does not work for network drives, I think that sometimes does not not (on this part, I'm not sure)

  on local disk also. Please, make sure that it works correctly. I use professional PS (the domain) CC 2015.1 (20151114.r.301 x 64) win7 64 bit

  Hi snarkysk,

  Please clarify the recent file list of file > open recent item > clear recent file list

  Let us know if that helps.

  Kind regards

  Assani

• \n doesn't work does not correctly

  Hello fellow Scripting Guys - it's probably something really basic, and it of really something minor but would be appreciated if someone could look in and explain why the \n does not work properly.

  I have a code;

  //created by Daryl Smith
  //puts artist name, filename, and date in the top left of the file.
  
    #target illustrator
  
  
    var thisDoc = app.activeDocument;
  
    var filename = app.activeDocument.name.replace(/\.[^\.]+$/, '');
    var createdate = app.activeDocument.modified;
  
    var  theDate = new Date();
          var day = theDate.getDate();
          var month = theDate.getMonth() + 1;
          var year = theDate.getFullYear();
          var hours = theDate.getHours();
          var min = theDate.getMinutes();
              if (min < 10)
                  min = ("0" + min);
          var morn;
              if (hours >= 12)
                  {
                      hours = hours-12;
                      morn = " PM";
                  }
              else
                  morn = " AM"
  
  var saveDate = (month + "-" + day + "-" + year + "    " + hours + ":" + min + morn );
  
  
    var nameTextFrame = thisDoc.textFrames.add();
      nameTextFrame.contents = globalartistname + "\n" + filename + "\n" + saveDate; 
      nameTextFrame.filled = true;
      nameTextFrame.alignment = "center";
     
     
     var thisdoc = app.activeDocument; 
     var hasDocCoords = app.coordinateSystem == CoordinateSystem.ARTBOARDCOORDINATESYSTEM;
         
         
          var p = thisdoc.pageItems; 
          for (var i = 0, l = p.length; i < l; i++) { 
              var pID = p[i]; 
              if (pID.guides == true) { 
                  var guideBox = pID 
              } 
          }  
          var wNum = guideBox.width; 
          var hNum = guideBox.height;
         
          var tboxw = nameTextFrame.width;
          var tboxh = nameTextFrame.height;
         
          var xOffset = (wNum/2);
          var yOffset = (hNum/2);
         
         
          var xNum = guideBox.position[0]+xOffset-tboxw-50; 
          var yNum = guideBox.position[1] + tboxh + 80 ;
         
  
     
      nameTextFrame.position = [xNum,yNum]
    
  
  

  I run my use of pallets;

  var putname = new File("S:/Art/ArtDept/Illustrator JS Palette/Scripts/Art Share Server/Construct/filenameonart.jsx");
  miscgroup.add ("iconbutton", undefined, ScriptUI.newImage (miscputnameIcon.a, miscputnameIcon.b, miscputnameIcon.c, miscputnameIcon.d),{style:"toolbutton"});
  
  

  Zantcor wrote:

  The script works correctly when I run the script directly but does not work when I run it from the pallet.

  Simply by using the following, given your case to have only one line seems to work very well. Directly and when loaded via BT, it seems to work fine as long as you have planned in my simplified test configuration.

  nameTextFrame.contents = decodeURI(globalartistname + "%0d" + filename + "%0d" + saveDate);
  

• DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

  Remote schema in 11.2.0.3 DB
  
  
  In 11.2.0.2 DB, I created a link pointing to a diagram in a DB 11.2.0.3 DB
  

  -- Used the new 11.2 syntax (similar to easy connect )
  
  SQL > CREATE DATABASE LINK dropLater CONNECT TO SCOTT IDENTIFIED BY SCOTT_123 USING 'blpclst-scan.ap.haster.com:3587/SNPG_AP.ap.haster.com';
  
  Database link created.
  
  SQL > select count(*) from ind_names@dropLater;
  select count(*) from ind_names@dropLater
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  ORA-02063: preceding line from DROPLATER
  
  
  
  -- But the Sysdate from dual test is working fine
  
  SQL > select sysdate from dual@DROPLATER;
  
  SYSDATE
  --------------------
  21 Nov 2012 13:24:29

  IND_NAMES Table exists in the remote schema SCOTT. Anyone faced a similair with DB links problem?
  
  I think that this problem is due to the difference in version (11.2.0.2 to 11.2.0.3)

  Hello

  I don't think that the other version is giving the problem.

  It seems that the SCOTT user doesn't have access to this table in the remote database.
  It seems odd if you say that the IND_NAMES table doesn't exist in the remote schema SCOTT.

  Could you run the following statements and see the objects owned by the user SCOTT in remote db?

  SELECT * FROM user_objects@droplater;
  

  If the table exists in the remote schema SCOTT should appear in the output among other objects belonged schema SCOTT.

  Kind regards.
  Al

  Published by: Alberto Faenza on 21 November 2012 14:55