Lexmark printer peripheral

Similar Questions

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Lexmark printer offline

  Original title: Tim Taylor

  My Lexmark printer is off line. How can I fix it? I used to be able to fix simple things, but I don't remember much more. Thank you

  Hello

  What operating system is installed on your computer?

  I suggest you to follow the steps mentioned in the link and check:

  http://support.Lexmark.com/index?page=content&ID=SO33&locale=en&UserLocale=en_US

  It will be useful.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Why microsoft keep removing my spooler to my lexmark printer

  My computer is equipped with a lexmark printer and is Windows XP using Microsoft Security Essentials for protection and I also used as malwarebites anti malware and everything works fine except that I get this message from Microsoft that they are to remove my spooler file and after that I lost my Lexmark icon toolbar lower and printer will not work. Also will it let me install a printer because the message says spooler is not found.

  Hi C.R.Dresher,

  ·         What is the exact message that you receive about the kidnapping of the spooler?

  ·         Exactly when you receive this error?

  Check to see if the following is useful.

  Method 1: Run the next Fixit tool and then install the printer.

  Problems printing and printing errors

  Method 2: Follow the steps in the article mentioned below.

  Printer in Windows problems

• LEXMARK PRINTER X 1240: LEXMARK PRINTER X 1240

  I WOULD LIKE TO CLEAN THE SCANER SIDE PARTS, I CAN'T UNDERSTAND

  HOW,

  DO YOU HAVE

  ENRIQUE

  Hello ethanpapi,

  Welcome to the Forums of HP.

  I see that you are having problems with your Lexmark printer.

  To get the support you need, please click on the following link for Lexmark Support.

  Thanks for your time.

• Lexmark printer problems

  I can't get my lexmark X 2500 printer to communicate with my computer.    Also I can't access the active domain forest.  . Any help out there?

  Hello

  1. you can unplug the printer and turn the printer off. If it's wireless power so just off the printer.

  2. do services.msc and stop the print spooler service.

  go to run the command and coil type, click OK.
  It will open the folder of spooling then please, open the PRINTERS folder, and delete everything that you see in the PRINTERS folder.
  After deleting restart the print spooler service.

  3. now connect the printer with the computer and switch.

  4. now check your lexmark printer services in services.msc.

  lexmark printer services from «lx_...» ». If they are disabled or stopped, you can start and make the automatic service.

  5. now try to print.

  6 - If you cannot print, so just go to / program & features of the control panel and uninstall the Lexmark X 2500 driver.

  7 - restart the system and download the Lexmark X 2500 driver of

  http://support.Lexmark.com/index?page=product&segment=support&ProductCode=LEXMARK_X2500&locale=en&UserLocale=en#1

  8. install the printer.

  He'll probably adjust your Lexmark printer problem.

  Thank you
  Imen

• Lexmark printer does not print.

  Original title: lexmart printer and Hp computer

  Why my printer does not print when it copies very well?

  Hello

  -Did you change on your computer due to which the question has begun?
  -What is the model number of your Lexmark printer?

  I recommend all steps (if any) of this article and check if the problem persists.

  Why can I not print?

  Note: Some steps also apply to Windows Vista.

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• unistall program will not let me delete a lexmark printer from my computer updated from xp to vista

  My computer has been updated from xp to vista. I install a lexmark printer and it does not work. does not print. unstall program don't take if off. Say not compatible to Windows vista.

  Hello

  try this program to remove it

  Choose the FREE version

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• With Vista Lexmark printer problems

  Vista problems. My Lexmark X 5495 locks up with Vista. The Spooler subsystem error.

  It will print, then stop. I have to restart to the freezing of the United Nations to the printer. Is there a Vista to the Lexmark printer driver

  http://support.Lexmark.com/index?page=recommendedDownloads&locale=en&ProductCode=LEXMARK_X5495&segment=download&UserLocale=en_AU#2

  List of your Lexmark model printer drivers at the above link > click Microsoft Tab here.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to get my Lexmark printer scanner to scan and it tells me that the scanning functions are not configured for program wnidows 7. How can I fix it?

  How can I get my Lexmark printer scanner to scan with windows 7?

  wnaza wrote:
  > How can I get my Lexmark printer scanner to scan with windows 7?

  Contact Lexmark to get Win7 drivers for devices and software for it
  specific model scanner.

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  n Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• How to clean my printhead on my Lexmark printer

  Put a new (black) ink cartridge in my Lexmark printer and it says I need a deep cleaning of the print head.
  My color ink cartridges are also very low. Can I just use black?

  Hello

  You can follow the procedure if you are comfortable to clean the Lexmark printer head.

  (a) insert a blank sheet of paper in the printer Lexmark using the paper tray and start the head cleaning process.

  (b) launching the 'Start' menu on your Windows computer. Show additional options, scroll through the list.

  (c) select the "All programs" link to access additional settings for your computer system. Choose the Lexmark folder that contains several features specifically for your printer. On some printer models, the software includes a "Center of Solution Lexmark" application that can be used to take through the troubleshooting steps.

  (d) click the "Maintenance" tab to access the settings of cleaning your printer. In few seconds you will be presented with a choice to print a test page. Select the option 'Print' and wait for the page at the end of printing for you. The ink cartridge automatically push the ink into the printer head and clean at the same time.

  (e) discovers the printed page to see if the colors and the quality is satisfactory. As soon as your printed page, you'll know immediately if your print head was totally clean and work properly.

  To get help on the issue, you can also contact Lexmark support.

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_US

  Note:

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Installation with Windows 7 Lexmark printer

  Im trying to install my Lexmark printer and it gives me the following message is displayed after recognized the printer: Windows is unable to locate a suitable printer driver.  Can someone help me?

  Visit the Lexmark web site and search for Windows 7 drivers for your printer. If there is none, Lexmark does not have a compatible set of drivers, then your printer does not work in Windows 7.

• Installer of Lexmark printer drivers saved in a folder "c:\Program Files \" (with a space at the end of this one!)

  I have a real problem.

  On my Windows 7 Professional machine somehow is an automatic update of installed Lexmark printer drivers and the installation program saved files
  in a folder names "c:\Program Files \" (with a space at the end of this one!)

  This all happened the day after without seeing me what was going on.

  It seems that the Windows 7 system does not like the folder or file names ending in a 'space' or a 'period' and it will not work with it.

  The side effect is that in some sort the system has copied EACH name on this new folder called sub0folder "C:\Program Files-" and I ended up with TWO files that have the air of the same name (even if we have a space at the edn of it ".

  It isn't really a problem in what I could simply ignore it (the other folder names corrrectly operates always OK). The only problem is that changes to 'Security' affect the TWO files because Windows 7 sees the two folder as the 'same' names when setting security.

  That's why, when I tried to mark the 'bogus' as 'not available' folder to everyone (including the system) it is the same for 'Program Files' (the real one) with disastrous consequences. I had the chance to get out and restore some semb; launched sound mind to my machine.

  But I'm stuck now with this annoying issue with many sub-fdolers (which are all unaccessable because the system cannot locate).

  My question is, how to remove a file that has a 'space' as the last part of his name when Windows Explorer cannot work with it?

  Thanks a lot with no matter what helpf with this very unusual problem.

  If you have the opportunity to make a complete picture of the system of the disc, I would before you try the following... just in case remove the "bad" folder ends up deleting all good also.  Alternatively, rather than remove the directory in the last step below, rename it using a command like

  ren c:\PROGRA~3 c:\badprogs {press Enter}

  If program of the 'real' the files and other directories survive unscathed, and then delete the C:\badprogs in the usual way.

  ******************************************

  In the search box, type cmd, then right click on cmd.exe and select "Run as Administrator".  Give the password when you are prompted.

  Type

  CD c:\  {Press Enter}

  to switch to the root

  Now type

  dir /x {press Enter}

  This will show you a list of directories of names "short form".  You will probably see something like this (from a x 64 Win 7 installation, is why there "Progra ~ 1" and "Progra ~ 2" directories ")

  Directory of c:\

  01/08/2012 13:19

  PROGRA ~ 1 Program Files
  30/07/2012 13:03 PROGRA ~ 2 Program Files (x 86)
  03/07/2012 10:46 users
  30/07/2012 20:16 Windows

  In your case, your directory parasite called or PROGRA ~ 3 (if you have x 64) or PROGRA ~ 2 (if you have Windows 7 32 bit).

  Now that you know the name short, which allows to delete:

  del C:\progra~3 {press Enter}