Lexmark printer problems

Similar Questions

• With Vista Lexmark printer problems

  Vista problems. My Lexmark X 5495 locks up with Vista. The Spooler subsystem error.

  It will print, then stop. I have to restart to the freezing of the United Nations to the printer. Is there a Vista to the Lexmark printer driver

  http://support.Lexmark.com/index?page=recommendedDownloads&locale=en&ProductCode=LEXMARK_X5495&segment=download&UserLocale=en_AU#2

  List of your Lexmark model printer drivers at the above link > click Microsoft Tab here.

  See you soon.

  Mick Murphy - Microsoft partner

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• upgrade to Win7x64 and now I have my Lexmark 2470 printing problems. I reloaded the software several times and still cannot print.

  I upgraded to Win7x64 and now I have my Lexmark 2470 printing problems. I reloaded the software several times and still cannot print. Any suggestions?

  Hey! Try this link

  http://support.Lexmark.com/index?page=content&ACTP=DD_LIST&ProductCode=LEXMARK_X2470&ID=DR16510&OS=WINDOWS_7_X64&oslocale=en_US&segment=download&UserLocale=en_AU&locale=en

• printing problem: my model Z715 inkjet Lexmark it does not print

  It worked fine before after after trying to remove the 2nd print order I have perhaps inadvertently deleted/removed some action / step, it has stopped working all together. Deletingthe printer and reinstall. Still, he does not what could have gone wrong.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  ·                         ________________________________________________________________

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·                         ________________________________________________________________

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Pavilion Slimline s5716f: wireless printing problems

  To anyone who is willing to help, it would be greatly appreciated... Exhausted

  I bought a lexmark Interpret S405 wireless printer tried to operate wireless for a wk now almost night & day, the phone w/lexmk. specialist support that ultimately told me that the problem was my desktop computer Hp the final diagnoise after hrs & hrs, was to communicate manufacturing hp but they said my warranty was expired and it would cost me to help, so here, I always try to get help before I dump this printer.  Exhausted all the tips, I promise you.  I actually did most of what they were doing, but went alittle far but all has been installed on & on printer appears as it should it worked at one point usb but will not print wireless diagnoise, final gave to me was: Windows 7 64-bit, could not start the lxeaCatsCustConnectService on the local printer.  Error message: 10:53, the server has not responded to the application launch or control in a timely.  I'd appreciate any help I can get at this point, before I dump my new printer...  Extremely exhausted and frustrated.  Now I think I bought the wrong printer, but it is supposed to be compatible...

  Thanks in advance for anyones time given and included brain...

  Fear can not help you a lot for a Lexmark printer configuration, but you can try the troubleshooting services in the following two sites:

  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/Troubleshooting.html

  And

  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/FAQ.html

• My lexmark printer does not print.

  I CAN'T GET MY PRINTER TO PRINT THINGS ON THE COMPUTER, BUT IT WORKS FOR EVERYTHING ELSE.

  I GOT THE PRINTER AND ALL OF THE LEXMARKS SAID TO DO, BUT IT STILL DOES NOT WORK.

  Hi Janicesellner,

  1. what operating system is installed on the computer?
  2. did you make any changes to the computer before the show took place?
  3. do you get an error message?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Able to scan, but I'm still having printer problems

  Original title: printer problems

  • I am able to scan.
  • I have the installation cd

  Thank you.

  You missed Service Pack (right click on desktop and select properties)

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  Alternative to the method of its first Article:

  http://members.Shaw.ca/bsanders/CleanPrinterDrivers.htm

• Why microsoft keep removing my spooler to my lexmark printer

  My computer is equipped with a lexmark printer and is Windows XP using Microsoft Security Essentials for protection and I also used as malwarebites anti malware and everything works fine except that I get this message from Microsoft that they are to remove my spooler file and after that I lost my Lexmark icon toolbar lower and printer will not work. Also will it let me install a printer because the message says spooler is not found.

  Hi C.R.Dresher,

  ·         What is the exact message that you receive about the kidnapping of the spooler?

  ·         Exactly when you receive this error?

  Check to see if the following is useful.

  Method 1: Run the next Fixit tool and then install the printer.

  Problems printing and printing errors

  Method 2: Follow the steps in the article mentioned below.

  Printer in Windows problems

• LEXMARK PRINTER X 1240: LEXMARK PRINTER X 1240

  I WOULD LIKE TO CLEAN THE SCANER SIDE PARTS, I CAN'T UNDERSTAND

  HOW,

  DO YOU HAVE

  ENRIQUE

  Hello ethanpapi,

  Welcome to the Forums of HP.

  I see that you are having problems with your Lexmark printer.

  To get the support you need, please click on the following link for Lexmark Support.

  Thanks for your time.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Lexmark printer does not print.

  Original title: lexmart printer and Hp computer

  Why my printer does not print when it copies very well?

  Hello

  -Did you change on your computer due to which the question has begun?
  -What is the model number of your Lexmark printer?

  I recommend all steps (if any) of this article and check if the problem persists.

  Why can I not print?

  Note: Some steps also apply to Windows Vista.

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• Windows Vista cannot communicate with a lexmark printer. my computer continually refuses to send to the printer

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.