Installation with Windows 7 Lexmark printer

Similar Questions

• After the installation of Windows 8, Lexmark printer does not work

  Right with a good number of other issues intensely ANNOYING, after the installation of my new 8-Pro Windows drive, my (Lexmark) ' All-In-One printer can apparently is no longer 'receive' orders to print from office. How can I fix this nonsense?

  Yes, if Lexamark had all this time to develop appropriate drivers then why not have it? Also, I had issues with both audio driver and company also told me that it is a question that I would have to take with Microsoft. The Lady at the Lexmark seemed to even insinuate they were working with Microsoft to develop the drivers but that does not seem right. After talking to Microsoft by phone that they were perplexed that either company would say contact Microsoft on their drivers. Bottom line is no one wants to take responsibility and no one wants to address.

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• With Windows Vista, HP printer repeatedly re - moved after turning off the PC, then return and losing sessions.

  I have Windows Vista, Dell Vostro A860, HP PSC 1410 all-in-one printer.  The HP CD work well with Vista.  The printer repeatedly re - installs itself, making it necessary to go into the settings to choose my preferences each time. I did download a fix from HP that has first requires that you uninstall the original software, and then download and apply the fix.  However, the patch will not install unless you have a software for its difficulty.  It is a cycle race.   Any ideas?

  Jeanette

  Hello

  1. don't you make changes on the computer before the show?
  2 did you receive an error message?

  Method 1:
  You can unplug the printer and reconnect the printer and check the issue. You can also uninstall completely printing software and then try to restart the computer and check.
  See the link for help.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2:
  After restarting the computer, you can download and install the drivers and check.
  You can check the link to download the drivers.
  Software downloads & pilot - printers all in one HP PSC 1410v
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=458978
  Also check out the link:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 3:
  After the installation of the printer, you can try to print a test page and check.
  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• How to wipe the laptop Vista Home Premium and replacement/installation with Windows 7 32-bit.

  I am interested in wiping my own laptop (Microsoft Vista) and the installation of Windows 7 32-bit system manufacturer. Can someone help me with this please? Step by step. Thank you!

  Hello

  This should help you.

  Make sure you save all your data before you start this method, because it will be lost.

  And that you remove the existing Partition Vista during this process.

  "How to do a clean Windows 7" install

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• Programs it installs with Windows 7

  I got a new computer with Windows 7 already installed. It will let me install other programs, such as Skype, kodak easyshare or registry mechanic. I returned to the 3rd party programs, and they assure me that it's all compatible and suggested things to try, but so far, nothing does.

  Hello kmartin898,

  Thanks for posting on the Microsoft answers Forum.

  I suggest that you try to use the Microsoft Installer Cleanup utility. Click here to download it.

  You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Now, try again to install the programs that did not exist.

  If please reply back and let us know if this helped get now the programs installed successfully.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem of the Acrobat 7.0 with windows 7.0 printer port?

  I installed adbobe acrobat 7.0 standard on my new computer (windows 7.0), and I get this message: "attention 20225 adobe 7.0 ws unanle to the port of the adobe printer.". Acrobat 7.0 works with windows 7.0?

  If you are able to open Acrobat and Distiller, then you can create a work around. If the Adobe PDF printer has been created, but not the port, and then change the port in a frame 'print to file '. Then open Distiller and a control file that you would print the configuration file. When you print the file, you may need to set the PS file instead of the default extension as NEEDED. The file is a PS file and the extension is only to help the configuration of the control record. Then try to print to the Adobe PDF printer and see if the control folder will do the job. I do not know and not him have not tried it on Win7 (I AA9) but it is an option to try. If it doesn't, then it's time to update - may be a good idea anyway.

• Pictures disappear completely after installation with Windows Life Gallery.

  I am editing with Windows Live Photo Gallery. Editing is fine, but later photos becomes no existing. The original is also gone. I have re downloaded and tried to change once again, and it's the same thing. I'm so frustrated. How can I solve this?

  Too bad. I thought about it. Haha. But if you have this problem, too, here's what I did. I went to the properties of the folder and clicked around with the 'Hidden' and 'Read only' options until they came. Haha.

• Software Kaspersky installs with Windows 8? What should do?

  Dear friends of window , have bought a new laptop with windows 8. Have traid for install my standard Kaspersky Pure software on windows 8, but he failed.

  I got message, Kaspersky not compatible to windows 8. After that have removed McAfee from windows 8 and replaced by Kaspersky Pure, but it still failed. I got a message again to compatibility issues. Any suggestions what to do?

  Thanks, Pieter Laarman

  Windows 8 has its own protection in the form of Windows Defender, which is a version of Microsoft Security Essentials.

  There is no need to install a 3rd antivirus protection solution part, and you shouldn't try it unless you know that your version is officially authorized for use with Windows 8...

• Adobe Acrobat 4 - Installation with Windows 7

  Not able to install my Adobe Acrobat 4 on my computer which uses Windows 7.  One or more drivers with incompatibilities with Windows 7.

  which is expected because acrobat 4 is very old and was not intended to be installed on Windows 7.  Here's more: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/adobe-acrobat-version-40-is-not-compatible-with/025b5116-352b-4066-ab24-6fe583057ae0

  update to a newer version of acrobat: the reader is free: http://get.adobe.com/reader/

  PS uncheck mcafee unless you are certain you want.

• Is X 63 Lexmark with Window Vista compatable printer

  I tried to plug my old printer of 8 year to my computer, but it keeps rejecting!

  Hello

  Lexmark wrote the drivers for their products non-microsoft

  You should check the Web site of lexmark for solutions to these problems

  It doesn't seem to be compatible with vista

  Check with lexmark for a workaround or upgrade your printer

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_X63&segment=support&UserLocale=en_AU&FromPage=null#1

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• with Windows 8 cannot print E-mail attachments in Outlook 2007

  I can't print the attachments of the E Mails with new window 8 Pro. Using Outlook 2007 to E Mails.

  Hello

  Thanks for posting in the Microsoft Community. Before you start the troubleshooting steps a few quick questions:

  1. are you unable to print any email or a particular message?

  2 are you able to print from other office applications and also from application windows such as WordPad, Notepad or Internet Explorer?

  3. what happens when you try to print? You receive error message nay?

  4. print preview appears fine?

  Change the printer and then try to print and check:

  Click on the file<>Print< under="">name ofthe printer change the OneNote or XPS document writer printer and check if it prints correctly.

  Note: If you are able to print from OneNote or XPS, then contact the manufacturer of your printer to update printer drivers.

  I hope that the above suggestions help. If you need any other replica of assistance and we will be happy to help you.

  Thank you.

• OBIEE11g Installation with Windows 2008

  Hey,.
  
  I intend to OBIEE 11.1.1.5-* 64 * in a server with this configuration:
  
  OS: Windows Server 2008 R2 Standard
  Installed memory RAM: 24 GB
  System type: 64-bit operating system
  Java: jdk 1.7.0
  DB: Sql 2005
  
  
  I read it is possible to install the OBI 11 g with this configuration, but also it has not confirmed Administration BI tools in 64-bit, can someone confirm that please? If this is the case, what is the procedure suggested to install everything 64-bit, with the exception of Directors BI tools? Also, which type of installation I'll take? I read all the Simple options, Standard and configuration. Thank you much for the help.
  
  Kind regards
  RG

  RG,

  Your specifications for WIndows 2008 64 bit good machine look. I would double check the JDK and stick to the version of JDK 1.6 to stay in compliance. You should always check each component of your server complies with the matrix of product certification of the Oracle that you want to install.

  Regarding the Oracle BI 11 g Admin tool running on a windows 64-bit machine, it is possible. The only thing you have to watch out is that when you create a connection ODBC system DSNS on a server Oracle BI remote that you use the correct driver like Win 2008 64 bit allows a distinction and a console that is different to handle 32-bit drivers / 64-bit.