What is a disk of Center of Solution?

Similar Questions

• HP Solution Center: HP Solution Center has stopped working

  I have a HP Officejet 4500 all in one printer, copier, scanner, fax machine.  When I first added the printer to my HP touch computer, everything was fine.  After that I have upgraded to Windows 10, things are complicated.  I used the HP Solution Center software for my scanner.  It worked yesterday, but does not work today.  I uninstalled the software and reinstalled, but now the scanner part does not appear in my devices and Solution Center still does not work.  I can scan from the buttons on the front of the machine, but I don't get the opportunity to change it before the scan is saved.  More embarrassing, and I hope that I don't have to buy a printer that is compatible Windows 10.  No simple solution out there?  I saw some other suggestions for similar problems, and they require a list of steps that I'm not comfortable trying on my own.

  Found the solution.  See that the other thread on this forum titled "Center of Solution does not work since the upgrade to Windows 10.  You should go to Windows Update and uninstall the security update 29/12/15, Microsoft pushed the 29/12.  Solution Center and then charge again.

• What happens if Disk Defragmenter is stuck on the 2 relocated pass

  What happens if Disk Defragmenter is stuck on 2-69% pass moved?

  Hello

  ·         What operating system do you use?

  Method 1:

  I suggest that you can run the disk check and check if you can perform disk défragmenterez.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Method 2:

  Try disk clean and check if it helps:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3:

  If the problem persists I suggest you to put your system to boot and check if it works:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• can what size hard disk I mount in a computer hp Pavilion ze4410ea laptop?

  What size of disk can be mounted in a HP Pavilion ze4410ea?

  Hello:

  You'd be safe with a 80 GB IDE HDD to 5 400 rpm.

  Definitely, do no more than 120 GB.

  Paul

• Photosmart C4795: Center of solutions of downloaded need Photosmart C4795

  Recently, I experienced a problem of dll when printing on my Photosmart C4795 printer.

  I have provided an extremely lengthy and detailed the problem correction, and after following all the steps, he succeeded!  Great!  Here's the bad news: I have the center of Solution and not really needed!

  Help, please!  Thank you!

  Hello

  Please download and reinstall the following software:

  http://ftp.HP.com/pub/softlib/software12/COL28119/MP-71555-4/PS_AIO_06_C4700_USW_Full_Win_WW_140_175-4.exe

  Kind regards.

• I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  You have one something or other HP connected to the PC? Check the CD-ROM that
  came with it. Otherwise, contact HP support.

• OfficeJet J5750: Center software solutions suddenly stopped-Windows10

  I have an Officejet J5750 All In One printer connected to a PC HP Pavilion P7. Used as a scanner for several years now.

  About four months ago, I've upgraded to Windows 10. Scan continued to work. Last week, suddenly, the center of Solution software doesn't work. Click and get nothing.

  I downloaded the software current Win10 OJJ5700_Full_Win_WW_140_404-4, uninstalled and reinstalled twice.

  I have not ran the Support Assistant - no solution. I ran the HP print and Scan doctor and scan test worked as expected. But the center of still will not work.

  The center of Solution called Hpqdirec.exe, so I ran it directly, as an administrator and Win7 compatibility. Nothing.

  I have not installed new software. Of course, I get frequent updates of Windows 10, but I can't untangle this Pandora's box.

  The software Windows Fax and Scan is more primitive and will not create a PDF file.

  I found a scanning module - hpiscnapp.exe and it works OK, although it does not resemble the digitization Solution Center screen. But it is a workaround, does not save the default values and has the functions as a sheet feeder. Restore rather the Solution Center. But I'm out of ideas.

  Anyone?  Thank you.

  Bruce

  Hello

  A lot of similar problem. Please check the following post:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-quot-Solution-Center-quot-for-C7280-all-in-one-printer/m-p/5426302#M515995

  Kind regards.

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• I have a Toshiba running Windows 7. I was wondering what was the "Windows Security Center" Service and what it does?

  I have a Toshiba running Windows 7. I was wondering what was the "Windows Security Center" Service and what it does?

  He will tell you the State of the AV / Firewall that is installed. Whether or not they are

• Pavilion a1250n: what is the executable media center

  I have a pc media center in Windows XP.  A rogue program wiped out my Start menu, and I can't find the executable file for the HP media center program which I preferred for Windows Media Player.  Anyone know the name and location of the executable?

  America, welcome to the forum.

  Here are some instructions that can help you find the file you need:

  1. go to START.

  2. click on SEARCH.

  3. click on 'files and folders...'.

  

  4. from "what you want to search for?" list on the left, click "all files and folders."

  5 type file names in the search box, and select "local hard drives" (normally, it's the disk C :).

  6. click on "Search".

  I type in Media Center to see if that helps.  I have not used XP for years.  So, I'll memory that it is correct.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• How to get the center of solutions for photosmart 2355

  My OS windows 7

  Printer/scanner HP PSC 2355

  I have the disk but does not install I have need administrative access that I am. bound to turn off any firewall restrictions.

  Need an alternative way of installation works Center and imaging solution

  Hi MDK000,

  Drivers for HP PSC 2355 all-in-one printer are already included in the Windows 7 operating system. You don't need to download the drivers to use the product. Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product.

  With the - OS driver, some of the buttons on the product do not work, and some of the advanced features of these products are not available as the Solution Center software.

  You can always scan, use one of the following methods to scan a document.

  Method: analysis with Windows Fax and Scan

• How is - a defeat the resistance "the center of solutions" lift?

  I bought my computer with Windows 7 loaded.  At the same time, I purchsed a Photosmart Premium C310a printer and have been using them on a wireless network.  Everything was wonderful, everything works so far!  For some reason, my Solution Center will not come to the top and I have a problem of bizaar signature.  When I approach my pc for the first time, to sit down and enter my user name and password, the PC always telling me I entered the information too often and no matter what I do (YES, EVEN entering the IMAGE PERFECTLY) entry is decllned with an error message.  Help, please.

  Hey watch this:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-and/SolutionCenter-MSI-popup-at-HP-Solution-Center-startup/TD-p/608

• Center of solution error at startup - HP4500 wireless

  Greetings!

  HP Officejet Pro 8500 A909g

  Win 7, 64 bit, Intel Dual Core

  Error at startup of the solution center 'Solution Center cannot work because your installation is not complete.  "Please plug in USB (I am running wireless) or restart the installation of the CD.

  Both software & printer worked very well for a long time.  To reinstall the software (yet) as 8500 disappeared from ground Ctr.  Removed all HP using HP uninstall disk, and then click Add/Remove programs.  Restarted the modem and printer.  Install and the latest version of the downloaded software went well.  8500 wireless recognized installation is complete, test page print wireless.  At the exit did not restart. Tried to ground Ctr and above got the error at startup.  I rebooted.  The same problem.  Then, I removed all and tried again with the same result.  HP printers are great - the software I used (in addition to time & different HP printers) makes me absolutely crazy!

  Kind regards

  Rich

  Hey Sherich - Id suggest giving the utility Install of Windows 7 to try first and then the doctor of printing & scanning HP. They can be found here: Hp Diagnostic utility's

  Let me know if or the other of these tools are able to solve the problem. Otherwise post returns with all new details or error messages, and we can go from there.

  Sorry for the delay!

  Sean

• Center of Solution Stop pop up on HP OJ 6500

  Hello

  Printer: HP Officejet 6500

  Crazy question: How can I prevent the solution Center popping up when someone sends a job to print wirelessly from another computer?

  Indeed, it appears to most solutions times. My computer is connected by USB cable, 3 others can send print jobs via the wireless.  Suddenly someone of another print job force the Solution Center to appear on my screen and interrupts my work.

  I'm looking for a way to prevent pop up unless I'm out of a job my machine.

  Thanks for your help.

  Red,

  • If you share the printer on your network, you should consider turning off the sharing feature.

  I'm not at all sure that this would cause the issue you see, but it could be a side effect of something that is kicking the alerts of ink on one job other than the one you issue your system.

  Shows how to use Windows 8.1

  Control Panel > display icon > Network and Sharing Center >

  Advanced sharing settings >file and printer sharing

  NOTE that it is ONLY for sharing printers, and as I am aware, would not result in what you see.

  Next:

  Control Panel > display icon > devices and printers > right click on your printer > Properties >

  Sharing > Edit the sharing Options > uncheck the share this printer

  As a sidebar to what above:

  • Each computer must its own copy of the complete functionality for its operating system software.

  General instructions to install the printer software

  ·         Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  ·         Open drivers HP & downloads

  ·         Enter your printer model information

  ·         Select your printer in the list of the 'results '.

  OR

  ·         Open printer HP OfficeJet 6500 Series

  ·         Enter your operating system from the menu drop-down

  ·         Click NEXT and scroll down

  ·         Find the category driver - software product installation

  ·         Select the base driver, e-print, or a full features software

  ·         Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  ·         If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·          Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software.

  ·          Scroll down the list of videos back until you find the video that best fits your situation.

  ·         Connection USB: download and install the driver software before connecting a USB cable.

  ·         Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router.  Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.

  ·         Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs-Up Kudos to testify and say thank you.

  When the answer is a good patch or solution to your Question, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• Center for Solution Installation window pop up annoying

  Because I re-formated my hard drive and reinstalled 'Office for SMEs 2007', whenever I turn on my computer I get a pop up from the solution Center telling me to install it. I read your response to laura917, but it did not help. My computer is a HP and I am running MS Windows XP Professional Version 2002 Service Pack 3. How can I get rid of this annoying problem?

  Hello

  What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

  Method 2:

  I suggest to download Microsoft Safety Scanner and scan your computer for viruses.

  You can download Microsoft Safety Scanner from the following link.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I also suggest you to see link and check.

  Download and run the Windows Installer Cleanup utility.
  http://support.Microsoft.com/default.aspx/kb/290301

  Warning: The Windows Installer CleanUp Utility is provided "as what" to help resolve installation problems for programs that use Microsoft Windows Installer. If you use this utility, you may have to reinstall other programs. Caution is recommended. We recommend that you do not use this utility with 2007 Office system products.