printing problem: my model Z715 inkjet Lexmark it does not print

Similar Questions

• Model is SVF15215SNB Touch screen does not work - no. Pen or touch input is available

  My computer model is SVF15215SNB Touch screen does not work and it says no. Pen or touch input is available for this view kindly let me know the solution to address the issue

  Hello!

  It seems that the model number you provided is not a model for us.

  This Forum is for help and support for the products of Sony us.

  For assistance, please contact Sony support team in your area for the best support!

  Thank you!

  Sorry for the inconvenience!

  http://www.Sony-Asia.com/countryselector.html?HPID=countryselector:AsiaPacific

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• Printer Lexmark 5150 does not always print immediately

  Printer will not work sometimes.  Printer does not print, but save the info in the queue.   After that I turned off my pc and come back the next day, it prints

  as soon as I turn on the pc.   If there is more then 1 point to be printed, only one will be printed.  Thank you

  Hello

  1. what operating system do you use?
  2. you did it before the issue of any material changes or software?

  Follow the steps in the article mentioned below.
  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• keyboard problem - ctrl, alt key Caps and windows does not

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi friends I have serious laptop keyboard problem. Initially, I had a problem as my keyboard as control key function is jammed up. After giving the driver update, it work properply. After a few days at each reboot my system, I need to give the driver update to make my keyboard working properply. After a while when I press BACKSPACE again once he goes back to the same problem as the stuck key then upward. now the keys to my car, control, windows and alt do not work

  Hello
   
  1. What is the number of brand and model of your laptop?
  2. have you contacted the manufacturer of your laptop?
   
  Follow the steps mentioned below.
  Method 1:
   
  Step 1:
   
  Test the keyboard in safe mode and check if the problem persists in safe mode.
   
  Step 2:
   
  If it works in safe mode, perform the clean boot and check. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
   
  Note : follow step 7 to your computer as usual, after the test.
  
  
  Method 2:
  a. check if on-screen keyboard funvtions normally.

  b. If possible, try to connect an external keyboard and check if the problem persists.

   

  If the problem does not persist if could be a hardware problem and suggest you contact the manufacturer of the laptop.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• deploy from model with the custom form does not not - NIC becomes disconnected

  [We're using vcenter 5.1 update 2]

  I have created a new model for 2012 Server R2 and I created a specification tailored to go with it. I went to test the deployment of the other day and it seemed that the personalised has not quite finished. He had put the local administrator password and baptized, but he does not join the domain. I finally understood that after the deployment, the NETWORK adapter is not connected despite having me 'connect to light' checked in the model. We are using the VMXNET 3 card.

  I've been messing around with the template for the past 2 days and I am stuck as to why it does not work. I tried the following...

  -checked the windows firewall is disabled (3 options) (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -removed NIC; cleaned up the registry to the HKLM\System\CurrentControlSet\Control\Network\; restarted; readded NIC (it was to eliminate any ghost NICs) (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -Remove vmware tools and reinstall. (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -card network in the operating system, unchecked "allow the computer to turn off to save energy" (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -checked that my new 2012R2 model uses the same host cluster and storage as my 2012 model that works. Also on the same port group distributed. (Essentially, all parameters of vcenter are identical between the two models)

  -also tried disabling the NETWORK card in the model (Windows Server 2012 comments customization)

  I have re-deployed the same server about 10 times and each time after deployment, you can see restart and try starting the customization but it crashes. If I manually turn the NIC on it is completed successfully. The problem is that I don't want to have to do that each time I deploy a server. Why is it disable the NIC and unchecking my option to connect to turn on and how to fix this?

  6.23.2014

  Based on tests (as detailed below):

  5.1 U2 - when patterns of deployment Server R2 2012 using a custom form, the NIC is not on after the deployment despite having ' connect at power on "checked.

  * We use VMXNET 3 and we use vDS

  
  

  Any help is very appreciated!

  -Adam

  Post edited by: atom_acres

  Problem solved: you need to update the hardware VM version from 8 to 9 on the template (also be sure to check "running on check and put vmtools")

  When you create a new virtual machine from scratch in 5.1 U2, he apparently uses VM Hardware version 8 instead of the latest v9. Once I upgraded it, made sure to check the box to have check and tools upgrade vm market, deploying with customization works and the NETWORK adapter is enabled when lit!

• Why this problem with the width of the content does not not on smaller screens?

  When I test this page on 800 x 600 screens, the text of the article is cut on the right side. I thought that including min-width and max-width (w/IE6 hack) on the div that contains the text of the article would solve my problem, but it does not work. He doesn't even answer if I decrease my browser window on my screen of 1024 x 768. I was reading on, and try to use, "elastic design" but I obviously missed one of the steps. Can someone look at this with a look?
  
  The same thing happens if I use the zoom feature on my browser, but I don't know if I can handle this via CSS?

  http://www.keithpurtell.com/kthings/BJ-Cole.htm

  Elastic layouts use Ems.

  http://jontangerine.com/log/2007/09/the-incredible-em-and-elastic-layouts-with-CSS

  It is very different from (%) of fluid or semi-fluid (% + pixels) layouts.

  See the following example of a liquid header & footer with a fixed width content area.

  http://ALT-Web.com/templates/I-page-with-floats.shtml

  To prevent the header & footer to collapse too on the small windows, I added a min-width of 900px (semi-fluid).

  View source to see the code.  Of course on web devices with small windows, they see a horizontal scroll bar.  Which is expected.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Page break problem <? split-of-page-break:? >-does not work.

  Hello
  
  I need a page break, after every row.
  <? split-of-page-break:? >-does not work.
  < xsl: attribute name = "break-before" > page < / xsl: attribute >-does not work.
  I can send RTF and XML files.
  
  Does anyone know how can I solve this problem?
  Thank you

  Send me the model and the XML file at [email protected]. I'll take a look.

  Thank you!

• Widespread problem "Firefox is already running" suggests it does not close properly - is Mozilla solve this?

  Several people including me have reported a problem when closing Firefox and then try to re - open. The message "FF is already running and should be closed... ' appears, but the taskbar does not display an active FF. At this point, it is necessary to use the Task Manager to close the old term.
  1 this not always the case on my computer has started recently.
  2. most of the time that it is indeed possible to open multiple versions of FF without difficulty. This problem only seems to happen if I close the first session and then immediately try to open a new.
  So my question is what causes this, not what workaround to usable solution when it occurs.

  1 both of these problems (ending to Firefox and restart) are a response

  http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#close_firefox

  2. multiple versions of Firefox you have to use -no-remote on your combination of browser/profile not by default. Which cannot be by chance, so either you messed up in start parameters, or you didn't never have multiple versions of firefox running at the same time.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Model of MOSFET of IPW60R045CP does not work

  Hello

  I try to simulate the IPW60R045CP Mosfet using the following spice model:

  . SUBCKT IPW60R045CP_L0 source of grid of evacuation

  LG door g1 8n
  LD drain d1 3n
  LS source s1 8n
  S2 s1 RS 1.5 m

  RG g1 g2 1.3
  M1 d2 g2 s2 s2 DMOS of L = at the 1u of of W = 1u
  . MODEL DMOS NMOS (KP = VTO 112.533 = 3.85 THETA = 0 VMAX = 1.5e5 ETA = 0 LEVEL = 3)
  RD d2 d1a 0.034 TC = 13 m
  . MODEL MVDR NMOS (KP = 272,45 = - 1 LAMBDA VTO = 0.15)
  Mr d1 d2a d1a d1a MVDR W = 1 u L = 1u
  D1a, d2a RX 1 m
  Cds1 s2 d2 195.5 p
  DBD s2 d2 Dbt
  . MODEL Dbt D(BV=600 M=0.85 CJO=88.84n VJ=0.5V)
  Cbody s2 21 CBODY
  . MODEL CBODY D (IS = 42.1 p N = RS = 2u EG = TT = 750n 1.12 1.08)
  Rdiode d1 21 1.69 m TC = 6 m

  . MODEL sw NMOS (VTO = KP LEVEL 0 = 10 = 1)
  Headaches g2 c a a sw
  Maux2 b d g2 g2 sw
  Waters c a d2 g2 1
  Eaux2 g2 d d2 g2 - 1
  Cox b d2 5.51n
  . MODEL DGD D (CJO = 5.51n VJ = 0.5 M = 1)
  OPG b d2 1
  DGD a d2 DGD
  Rpar2 d2 has 10Meg
  CGS g2 s2 6.81n

  . ENDS IPW60R045CP_L0

  It does not work (no error message, but no current is flowing).

  Is there a way to make this model work?

  (I use Multisim 11.0)

  Uwe Fechner

  Hello

  I managed at the end.

  I had to modify the graphic symbol of the transistor with the symbol Editor.

  Door and Source were exchanged there.

  Best regards:

  Uwe Fechner

• HP pavilion model 13-A113CL: HP pavilion does not open! Help!

  I pressed the power button to turn on, click on my name to get into the computer and the circle began to turn - loading - and that's all. Has continued to charge for one hour... I tried unplugging, turning off the coast and back in and it's on the same startup screen, loading. How to stop loading and let me in my computer? I have a huge book in 2 days, I need to enter my computer! Please help me!

  Sarahb9227

  Hello;

  Let me welcome you on the HP forums!

  I read your message on your portable computer does not complete startup and wanted to help.

  With Win10, you get automatically updates Windows and MS just pushed a bunch of updates last night.  All my PC Win10 entered the same boot loop this morning.

  Just restart and wait because it can take a long time for the updates to all the.

  If he keeps this tomorrow, we think about alternative measures.

  Please keep us informed.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• I have problems to download or install anything which does not directly from windows update or security or disk update.

  I just got a new computer with windows Vista.  I had another computer with Vista, but have not had this problem before.  I can't download any programs like itunes, adobe or messengers.  The problem is that when I download or install it runs through the steps, but does not end.  If I download something I choose to save to the desktop.  I don't have the box checked to close when the process is done, but it remains closed.  I tried to disable the virus protection and firewall and have always found the Outlander issues.  Is there something I can do to fix this?  It became a same stress and annoying problem with a list of solution without end.  Nothing seems to work for me.  Can someone please help with to let me know what I can try?  I tried what was listed on help and in all instances and still can not find the solution.  It cannot be a virus or security issue because it was a brand new computer and I did all the updates of windows.  This problem has been with me from the beginning on the brand new computer.  Help, please!

  Hi Willibus,

  Thanks for posting your question on the Forums of Windows Vista.

  Sometimes security software can block access to the software download and installation.

  You can try disabling the security software and check if that allows you to download and install the software.

  If this does not help, you can also try to create a new user account on the machine and check if that helps.

  You can follow the article given to transfer data from the old user account for the new user account:

  http://support.Microsoft.com/kb/928634

  NOTE: Make sure that you do not transfer the parameters, but only data from corrupt or good account the new account will again get corrupted and the question may reappear.

  You can also try to set up the machine in a clean boot state, and check if all software 3 part blocks access.

  To set up the machine in a clean boot state, you can follow the given article:

  http://support.Microsoft.com/kb/331796

  Note:  Make sure you put the computer to a Normal startup mode once the problem is resolved.

  Hope the above information helps. Please go back and let us know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

  So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

  My answer on another question where someone had a similar problem... good luck!

  'Hi. '

  Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

  So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

  Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

  And that was all... hope it helps even if this is later. "

  Hi @klark1kent,.

  Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

  Have a good week.

  Thank you.