library in grid mode very slow navigation
I just switched from Aperture to Lightroom, and one of the main differences is that browsing photos in Lightroom is much slower. I opening I 50000 photos and it was working fine, now in Lightroom, I have only 2000 and the grid view is extremely slow.
When I scroll down, the small thumbnails load slowly in 3 steps: first images very pixelated, then a little more net and finally the final thumbnail. When I scroll down to see the 20 pictures, it takes up to 1 second to load. It's extremely boring...
In addition, when I am constantly scrolling, use the Lightroom UC is up to 200%.
I have a the last Macbook Pro w / 4 GB RAM so that shouldn't be a problem.
Is it normal for Lightroom or am I missing something? My only comparison is the opening that was extremely fast and do not use a lot of CPU when scrolling.
Thank you
Peter
Peter Bodik wrote:
but not all together, from the top of the screen, line after line. Meanwhile, each vignette also changes (it becomes a little clearer).
Is there a way to make this smoother?
It's annoying, but Lightroom is control through each of the files to check if the metadata and previews are updated. It is one of the areas that have been the improvement of Adobe as part of the interactive performance changes in Lr3 beta.
Tags: Photoshop Lightroom
Similar Questions
-
Lightroom develop Mode very slow to respond to commands
When I try to get a photo ready to print and I am in the window to develop, the response time when I try to make adjustments to the phots are not acceptable. Very, very slow and almost impossible to accomplish what I need to do to get the photo in print mode. I have a blockage somewhere but I am at a loss to know how to fix this problem. Any help greatly appreciated
Issa, john brings a very valid point
I had some problems not unlike yours, and all that was needed was an update for my Nvidia driver.
Because I updated the driver, my lightroom {and computer} runs smooth as silk.
You can check, to see if a new driver is available...
I hope that wiser member with chime in here?
Mike
-
HARD drive in PIO mode - very slow
Anyone else have a HD Sentinel message - or another HARD drive test, that HARD is only in PIO mode, not in Ultra DMA? It's really slow.
It can be verified, my computer - property - materials - IDE ATA/ATAPI - IDE elementary or secondary school - property - Special - if the watch - PIO transfer mode you have the same problem.
If Ultra DMA 1-5, you have no problem.If anyone has a solution, please report it. Thank you.
When the primary IDE controller is set to PIO mode, the audio may be distorted or the system can boot and run slowly. To resolve this issue, reinstall the primary IDE channel device driver. Primary IDE controller transfer mode will reset to default DMA.
-
When I first start Firefox, all right. And everything is fine as long as I type in the text boxes on any web page. I can type in the address bar or search throughout the day with no problems.
But, for example, just by typing in the edit box to ask this question on this site will result in the problem after I typed more say 150 characters. After this strike ANYWHERE in Firefox will be very slow, even the address bar or the search bar. It doesn't seem to matter what site use to type in the text. Cause the problem to occur after typing in enough strikes.
Navigation & mouse clicking remains fast - it is only typing seems to be affected. In order to recover, I have to restart Firefox.
If I look at the use of the UC Firefox.exe in Process Explorer, I see that once the problem occurs, the CPU usage starts whenever I type a key fortification. Indeed Firefox maxes one of my two hearts so the cpu is at 50%! He goes down to 0% again once I stop typing.
As mentioned in the subject, it is in Mode safe mode with all extensions & plugins disabled. I'm running on Windows XP SP3 with an old AMD Athlon 64 X 2 Dual Core Processor 3800 + (1.81 Ghz) with 2.00 GB of RAM.
I think it started to happen with Firefox 3.6 significantly (it's amazing how much time I can navigate without having to type), but it sometimes occurred with previous versions. Now he is annoyingly repeatable.
I have to use '-no - Pei ForTyping distance "to start a separate session of Firefox that I use just to type in the text boxes, so I can restart at will. I also compose messages in an external editor and simply paste in Firefox to avoid typing as much as possible.
This may be a problem with session restore. Firefox stores session data every 10 seconds to make it possible to restore a session crashed.
It may be a problem with the sessionstore.js file in the profile folder
Delete the sessionstore.js and sessionstore.bak and all files files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js.
-
When you start Firefox normally the keyboard and mouse input is very slow. The videos are restless with her interruption. Scrolling is almost impossible. When you start in safe mode, Firefox works fine. Internet Explorer works well as Thunderbird. Have
tried to update Firefox and disabling modules.Hello Paulkh, please disable graphics hardware acceleration.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Open the Firefox Options tab as follows, click on the menu button
and select ' Options.
- In the Options of Firefox tab, click the Advanced tab, and then select general.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Uncheck this box.
- Now restart Firefox and see if the problems persist.
This solve your problems? Please report to us!
Thank you.
- Open the Firefox Options tab as follows, click on the menu button
-
My macbook pro is very slow, and often stuck mode programs "not responding".
MacBook Pro (13-inch, mid-2012)
Intel Core i5 2.5 GHz processor
4 GB DDR3 memory at 100 MHz
500 GB of storage capacity SATA disk
Operating system OS X El Capitan 10.11.3
It is very slow to start, in addition to open programs, for example, Mail, Safari, Word, Adobe Reader. Sometimes it can't even open programs and gets stuck in mode "not responding". I feel like a memory problem.
Download and view a report of Etrecheck:
http://www.etresoft.com/etrecheck
Ciao.
-
computer running very very slow and takes place in Not responding mode
My computer is very slow and when I finally get in line and try to do something or go to another web site, it goes into Not responding mode
The malware scanner
-
Original title: network very slow connection on the current installation of Windows?
So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.
Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.
Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.
I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.
I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.
I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.
Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.
Thank you for your time.
Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.
More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.
I think that the problem has passed away now, but if it arises again I will probably update this.
Thanks for all the suggestions and your time in this issue.
-
My X 51 that R2 is very slow recovery mode sleep (windows 8.1, 100% of disk in the Task Manager). I ran the online support tool and Support tool help. It takes 3-5 minutes before using the drive falls down to a normal level and the PC can be used.
Please help. Thank you.
Hello
This may have something to do with the settings in Windows 8.1. Take a look at this Microsoft Community forum thread, it may be useful.
-
After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.
PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?
Rune
One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.
A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem. Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.
-
Just updated LR 4-6, so I find lightroom does not not like before. LR 6 is very slow at the start, whenever I pass 'Library' to 'Develop' or import images, the Apple beach ball will roll for a few minutes first. My iMac uses OS X version 10.10.5 are all these compatibility issues? What should I do to make it work better the lightroom?
Please take a look at the article and follow: https://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html
-
Navigation between windows diff in firefox is very slow. Help, please.
Firefox responds very slowly when I want to go to a different window that is already open, or if I press on + Options button to open the new window / tab, the response is very slow. Sometimes firefox responds at all, a message arrives that "Firefox is not responding", and after that the browser starts to reload all pages. It's pretty boring. Kindly help.
I use WIN 7. the system has 3 GB of RAM, 2.2 GHz processor from intel, 32 bit OS.I deleted the sessionstore.js and .bak files and then reset the browser. This accelerated its response. thnx a lot to you two.
-
Firefox is very slow to respond when you open and almost always unresponsive altogether, refusing even to respond to Manager task "End program" command. The "not responding" error message is also over browsing online. Several attempts must be made to get online. A loss of stability seems to be endemic at the present time.
Try to follow the instructions here: Firefox crashes or does not - how to fix
-
Hello
I use DW CS5.5 and 8.1 of Windows on a PC. The PC has a lot of memory and power. I use DW 5.5 for the manufacturing and Assembly of Web sites. My laptop has a 17 inch screen. For a site specific Web I have change, page not in 'Design view' without going to "Live View". Also for this one site, DW5.5 is very, very slow and unresponsive. The site is great but has not much JavaScript which would slow down so much performance. I won't change the preferences registry because it is the only site that I'm working on that has this problem. If you answer, please be very clear and explicit in the steps I have to take. Thanks in advance for your help and support. Sorry that the wrong title was on my post.
The first thing I would do, because it seems to only be one site, is this site 'wrong' for html errors. Run the validator at http://validator.w3.org/nu and clean up all the errors that it finds.
-
Hello
for three years, I never had any problem with my Mac. Now, all of a sudden, from one moment to the other, it runs very slowly. Also, I have to force every time you start the Mac with pressing the button for a few seconds. When closing the laptop and opening it, it locks again as well (only the screen black, start must be forced).
First thing I noticed was that kernel_task uses up to 400% of the RAM. I tried to find the problem myself, read about kernel_task, and did the following things (without success):
-Updated to the latest version of El Capitan
-Reset NVRAM and SMC
-hardware running apple diagnostics test (Code: ADP000 find anything)
-removal of protected system /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC _PlatformPlugin.kext/Contents/Resources to another folder, files and then reboot
-make an EtreCheck.
Can someone help me? Especially to interpret the diagnosis of EtreCheck?
EtreCheck version: 2.9.13 (267)
Report generated 2016-08-08 15:04:23
Download EtreCheck from https://etrecheck.com
Time 06:37
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
All of a sudden, MacBookAir runs very very slow. Everything takes forever.
Duty to force each start by pressing the button for 7 seconds.
kernel_task use ±300% RAM all the time.
No fan noise, not a spillage. MacBookAir has warm as usual (not at all).
Reset NVRAM and SMC memory did not help.
Test hardware said no material error (Code: ADP000).
MacBook Air (13 inch, mid 2013)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir6, 2
1 1.3 GHz Intel Core i5 CPU: 2 strands
4 GB RAM not extensible
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 522
Intel HD 5000 graphics card
Color LCD 1440 x 900
OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour
SM0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: Go 120,10 (17.04 GB free)
Storage of carrots: disk0s2 120.47 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/Applications/TunnelBlick.app
[no charge] net.tunnelblick.tap (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]
[no charge] net.tunnelblick.tun (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]
[loaded] 5 tasks of Apple
[loading] 167 tasks Apple
[operation] 66 tasks Apple
[loaded] 46 tasks Apple
[loading] 160 tasks Apple
[operation] 84 tasks Apple
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
[no charge] com.oracle.java.Java - Updater.plist [Support]
[loading] com.adobe.fpsaud.plist (2016-06-29) [Support]
com.Apple.Installer.osmessagetracing.plist [loading]
[loading] com.flexera.ia.helper.plist (2016-05-09) [Support]
[loading] com.google.keystone.daemon.plist (2016-07-12) [Support]
[no charge] com.oracle.java.Helper - Tool.plist [Support]
[loading] net.tunnelblick.tunnelblick.tunnelblickd.plist (2016-05-09) [Support]
org.eyebeam.SelfControl.plist [no charge] (2016-06-07) [Support]
[loading] com.bittorrent.uTorrent.plist (2016-01-18) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-17) [Support]
[loading] com.nchsoftware.switch.schedule.LikeSurvey.plist (2015-06-15) [Support]
[loading] net.tunnelblick.tunnelblick.LaunchAtLogin.plist (2015-01-08) [Support]
[loading] 410 tasks Apple
[operation] 163 tasks Apple
FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]
QuickTime Plugin: 7.7.3 (2016-07-09)
Flash Player: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]
EPPEX plugin: 4.1.0.0 (2011-07-27) [Support]
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-07-09)
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-05) [Support]
Unity Web Player: UnityPlayer version 4.6.5f1 - SDK 10.6 (2015-05-07) [Support]
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-20)
Facebook - Sonny Fazio - http://sonstermedia.com cleaner (2013-08-30)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-07-24)
RSS-Eradicator - Anton Osika - http://antonosika.github.io/newsfeed-eradicator/ (2016-06-09)
Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-04-06)
Flash Player (2016-06-29) [Support]
Time Machine not configured!
36% safari
com.apple.WebKit.WebContent (3) 35%
32% WindowServer
22% mds_stores
12% kernel_task
Top of page process of memory: ⓘ
Safari of 700 MB
627 MB com.apple.WebKit.WebContent (3)
Kernel_task 495 MB
Mdworker (13) 201 MB
Mds_stores 147 MB
206 MB free RAM
used 3.80 GB RAM (801 MB cache)
Used Swap 0 B
8 August 2016, 14:44:22 self-test - spent
August 8, 2016, 13:58:15 /Library/Logs/DiagnosticReports/Safari_2016-08-08-135815_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
Thank you very much!
KlausKandinsky
you have 4 GB of RAM that can be demanding on the system regardless of suggestion of apples El Cap with run with 2; It will be, but do not expect to use the computer for a large part to start the system.
also you run bit torrent, any software you get this service is suspect.
Stop
Disconnect all external devices
start in safe mode
https://support.Apple.com/en-us/HT201262
test the system and runs better restart normally.
Maybe you are looking for
-
Can satellite C660 - 11K - I Add Bluetooth?
Hello I have a C660 - 11K and I understand that this laptop doesn't have a bluetooth technologicalinbuit (can't think why, so it would be useful to have instead of all these different cables for all my bluetooth devices) in any case, is there a way I
-
Photos wants re - download my entire library
I recently had my iMac HARD drive replaced under the recall and thought I was smart by backing up my library of Photos on a laptop HARD drive beforehand (so I didn't have to download all the 500 GB to restore). Now, I have my machine backward, I rest
-
Satellite Pro L10 recognize anything on USB
HelloI upgraded my Vista laptop and everything seems fine, except there is a device not recognized in Device Manager. I can't use one of the USB ports. Simply, they do not recognize anything plugged in, not even an error message. The port is physical
-
Installed app... invisible or hidden?
I have an application which is installed but not visible anywhere... is it hidden app option somewhere tha tmight be hide the icon? KC
-
Problem installation of DSC Module 2016
Hello I try to install LabVIEW 2016 64-bit on my 10 64-bit windows. the problem is: Although labview is installed and works perfectly, when I try to install the DSC module an error appears and indicates that LabVIEW is not installed! LabVIEW module a