Libretto U100: 30 GB Hard Drive Upgrade-60 GB - need reference number

New kid on the block.

I have a U100 part number: PLU10E-00U023EN and I would like to upgrade to a 60 GB HDD.
I am looking for a part for this replacement hard drive number.
Can as someone tell me where I can buy this in the United Kingdom. Retail store would be useful. If this is not the case, a mailing address would be appreciated.
I saw one of OFFTEK Â £43.0 Plus VAT, part number: KTT3311/1 GB.

Then I saw the same part number for Toshiba and it costs more than £100.
Maybe someone can tell me where I could get the Leicester close to upgrade.

I found the site very useful.
Thank you.

I think you should take a look in this thread:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=99399#99399

It s on the same theme as you have posted here in the forum!

Tags: Toshiba

Similar Questions

  • Libretto U100 - exchange of HARD drive

    Is it possible to change the hard drive of a Libretto U100 without voiding the warranty? Does anyone tried to do it again?

    Change HDD on the Libretto U100 is very complicated and without maintenance manuals, you can not do this. Believe me, booklet design is quite complicated and I don't think you can do it yourself.

  • iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?

    Hi all

    I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.

    Any entry received with gratitude

    Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?

  • Satellite A50-111 - HARD drive upgrade

    Hello!

    I need to upgrade hard drive of my laptop because it is very slow. However, I know it's a 60 GB to factory-installed 4200 RPM.
    I'm ready to be upgraded to a fast 7200 RPM, if possible, with a decent capacity, but I'm not sure of the supported hard drive type (IDE?, 2.5?) is a model of 5 years. In my view, there are incompatibilities with the laptops today, hard drive formats, so I really need help.
    Thank you very much for your help!

    These are the specs on the site
    http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 97598

    Hey Buddy,

    In my opinion the HARD drive upgrade will not increase performance well then you should try the other options first as reinstalling Windows, or upgrade the RAM.

    Anyway, Satellite A50 use IDE interface, so you can use hard disks of 120 GB of disk space.
    Of course, you can take a model at 7200 RPM, but they need more energy and produce more noise.
    I recommend a 120 GB 5400 RPM model. That s pretty fast!

  • Satellite A40-151 Possible HARD drive upgrade

    Hello

    are there restrictions on the type of hard drive that you can on this model?

    RPM
    buffer
    Number of PINS
    Type of the ATA

    I was watching a Seagate Momentus 5400.3 ST980815A, if this helps answer the question.

    Concerning

    Lee

    Hello

    I found the info your device comes with 40 GB IDE (ATA - 5) HARD drive. I think in your case, to capacity. High-capacity hard drives are not recognized properly, but I think that with 60 or 80 GB HDD should perhaps be recognized correctly.

    If anyone on this forum can give you accurate information, I recommend you contact your local dealer or service in your country. They are experts upgrade material and they have accurate info on HARD drive upgrade.

    Good luck!

  • HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

    HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

    I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

    Thank you

    The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

    Data sheet

    6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

    Manual

    Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Vostro 420 maximum size of hard drive upgrade?

    What is the maximum size of hard drive upgrade that works with the Vostro 420?

    FYI: I am considering adding a Western Digital Caviar Black WD2002FAEX 2 to 7200 tr / MIN 64 MB Cache SATA 6.0 GB/s 3.5 "internal hard drive
    (The 6.0 GB/s should adjust downwards to the Vostro 420 3.0 Gb/s, it's the limitations of maximum size, I need.)

    Thank you

    i456Kle9p

    2 TB SATA hard drive, works perfectly in a vostro 420.

    Bev.

  • My hard drive crashed and I need to re - install Adobe Acrobat.  I have the serial number of the previous installation.  How to install the software all over again?

    My hard drive crashed and I need to re - install Adobe Acrobat Professional.  I have the serial number of the previous installation.  How can I download the software from the Adobe web site?

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

    Acrobat 9: 8 - http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

  • My hard drive crashed and I need to re - install Dreamweaver CS3

    My hard drive crashed and I need to re - install Dreamweaver CS3. I have my license, but I can't find a copy of the software. I found some comments that Adobe makes available for download. I want to continue to use this version.  Anyone has any ideas on where I can find a copy of Dreamweaver CS3?

    If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

    and activate it with your serial number.

    If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  • I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

    I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

    Hello

    The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

    Learn you more about the Firefox profile folder, how to backup and restore, here.

    I hope this helps, but if not, please come back here and we can look at in another option for you.

  • Tecra Z40 - HARD drive upgrade

    Hello

    I bought the Z40 with a 500 GB HARD drive. As a replacement, I bought the next SSD:

    Crucial CT512MX100SSD1 - 500 GB

    Unfortunately I don't have to work. On the BIOS, I see that the system recognizes the ssd. But the boots of system restore, or windows 8.1 detail installs. Are there any known compatibility issues?

    Problems persist if the bios setting is UEFI oder CSM.

    I have upgraded to the latest version of the bios to 3.7, but that did not change the result.

    If the BIOS recognizes the new SSD drive, the drive must be visible to the system.
    May I ask how did you try to install the OS Windows 8.1?
    Have what media you used?

    The Z40 Tecra can't internal ODD (optical disc). This is why I m wondering about the installation procedure

  • Libretto U100 - modules uncounted after disk upgrade

    Hello

    Please help me find the solution or dedicated instead of U100 service.

    It is a case:
    I bought the Libretto U100 of some guy (his property), booklet assembled with 30 GB and 512 RAM... I changed the RAM to 1 GB and ask my it guy (friend) to change disk... everything went well...

    After the change, I installed a version of winmx... with all the taken drivers support Toshiba (u100 drivers)... one of them has been updated BIOS level...

    After all, I found that my manager material showing an error... mass storage (yellow marks not informing - no drivers), module Ethernet (not even driver) and fire wire (133smth) who cannot not start this service to inform...
    At the same time, I found that Ethernet is probably Wi - Fi which are not recognized by Windows XP (switch works and led goes on or off depending on my action)...

    What to do with it? Is there any «wise» service in my part of Europe (Poland)?
    Thx for the help
    Andrew

    Hello

    According to specification for laptop, your laptop is supported for Windows XP Home edition and to avoid problems with installation of drivers, tools and utilities. To have the operating system successfully installed, you must install all the stuff in order of specific facilities.

    It is very important that you install Windows XP SP2 home edition.
    After the installation of Windows XP Home edition continue to install the drivers, tools and utilities following this order of installations:
    Windows XP Pro Edition SP2
    Chipsets Intel (r) software installation utility
    TOSHIBA common Modules l
    Intel (r) 82852/82855 GM/GME Graphics Controller
    SoundMAX Integrated Digital Audio
    TOSHIBA software modem
    Intel(r) PRO/100 VE Network Connection
    Bluetooth Stack for Windows by Toshiba
    Bluetooth monitor
    Wireless LAN driver
    SD Secure Module
    TOSHIBA controls
    TOSHIBA HDD Protection
    TOSHIBA SD memory card format
    TOSHIBA SD Memory Boot Utility
    TOSHIBA Hotkey Utility for display devices
    Wireless keyboard shortcut
    TOSHIBA screen utility unit of change
    TOSHIBA zooming Utility
    TOSHIBA Power Saver
    TOSHIBA utilities
    Password TOSHIBA utility
    TOSHIBA ConfigFree
    ConfigFree demo screensaver
    TOSHIBA management console
    TOSHIBA fingerprint utility
    TOSHIBA PC Diagnostic Tool
    TOSHIBA Assist
    TOSHIBA Virtual Sound
    CD/DVD Drive Acoustic Silencer

    If I'm missing something you can install it at the end.

    If you need assistance contact service professional. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

    Good luck!

  • Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

    I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

    (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

    I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

    While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

    10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

    I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

    I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

    I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

    Can you help me?

    Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

    I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

    If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

    Once your disc is clean, then simply install Win10 on it.

    That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

    Good luck

  • Satellite Pro A120-128 - HARD drive upgrade

    Hello

    I'm seriously exhausted on HARD disk space and want to upgrade my HARD drive in my Satellite Pro A120 128. Is there a maximum size that I can update? This model takes SATA or IDE?
    Any suggestions on make & model disk HARD upgrade to?

    THX!

    Normally it should not be a problem to use a HARD drive this lager s like 137 GB because as much as I know there is no limit of capacity on SATA interface.
    But as said Akuma, test it before buying this drive.

    However, an IDE HDD does not fit in this notebook

  • Satellite P200D-139 - HARD drive upgrade options

    I received a P200D-139 and there seem to be two 40GB hard drives.

    I want to upgrade if I put Windows 7 on it.

    I have updated the BIOS, so how big a drive can I put into each slot of the HARD drive?

    I'm also going to 4 GB of RAM.

    See you soon

    Gary1857

    Hello

    Satellite or Equium P200D series was equipped with SATA HDD.
    This means that mobile supports the SATA HDD controller, which means that we must avoid any physical limitation.

    Usually, you can use any HARD drive 2.5 SATA
    But I think that 320 HARD drive should be good enough
    What do you think?

Maybe you are looking for

  • Watch only unlock macBook Air

    I have an Iwatch is the first gen however updated to ios 3.0, I also have a MacBook Air, which is a 2015. I only got about 4 months. I downloaded Sierra and was very excited on my watch unlock my mac. However, it will not work. I did every step very

  • new to apple and may not know a lot about this computer again

    You just bought a new iMAC. So far, I'm green grass on this subject. My first question is how can I know when the keyboard and mouse are all loaded to the top? Second question, is that they are more accountable?

  • Why Firefox does not delete cookies by leaving to open tabs?

    Firefox does not delete cookies for the tabs that are left open when you quit the browser even with empty cookie options set. Cookies are only eligible for the tabs that are closed before leaving the browser. I do not understand how this could possib

  • Downloads blocked

    RE: Downloads blocked I try to download a driver for my laptop and get the following message: "Cannot start Service EHR - this driver has been blocked by a load." My computer is a HP Pavilion dv7 1232nr with Vista Home Premium 64 bit operating system

  • Frost at the blue start screen

    Pavilion DV6-2155dx of 2010 works well earlier today, then re-enable and generated a blue screen and will not go further... no error at all.  Ran a 'Start Up Test' that says that Memory Test passed, intelligently check passed, but short DST failed.