License of IPSec Cisco ASA

Similar Questions

• Capacity of the crypto ipsec Cisco ASA 9.1 stats system failures

  Hello

  I'm trying to find some performance issues on one ASA centralized and some site VPN settings.  I already address bits of fragmentation and flow control which seeks to solve performance problems, but I came across something that I can't identify to understand what he said.

  I can't seem to find any documentation that explains what triggers the counter for "Capacity of the system failures" on the stats command see the crypto ipsec:

  crypto ipsec sho stats #.

  IPsec statistics
  -----------------------
  The active tunnels: 41
  Previous tunnels: 8999
  Incoming traffic
  Bytes: 8292491846127
  Decompressed bytes: 8292491846127
  Packages: 25115896849
  Packet ignored: 1291637
  Review of chess: 220
  Authentications: 25114592561
  Authentication failures: 0
  Decryptions: 25114592564
  Decryption failures: 0
  TFC packages: 12836
  Fragments of decapsules who need reassembly: 17418535
  Invalid ICMP received errors: 0
  Invalid ICMP received errors: 0
  Outgoing
  Bytes: 37818073925334
  Uncompressed bytes: 37818837785556
  Packages: 38014583887
  Packet ignored: 2413164
  Authentications: 38020189281
  Authentication failures: 0
  Encryption: 38020191839
  Encryption failures: 0
  TFC packets: 0
  Success of fragmentation: 7763651
  Fragmentation before successses: 7763651
  After fragmentation success stories: 0
  Fragmentation failures: 267158
  The failures of previous fragmentation: 267158
  Fragmentation failures after: 0
  Fragments created: 15527302
  PMTUs sent: 267158
  PMTUs rcvd: 185
  Protocol of failures: 0
  Missing chess SA: 255102
  Outages of capacity: 3167258

  Does anyone have knowledge of what this is referring to specifically?

  Cheers, Dale

  Hello

  What is the model of the ASA you have and how many vpn sessions you get on average during peak hours?

  Lack of capacity occurs when it is short of ability of the material or the use...

  Concerning

  Knockaert

• licenses for a cisco ASA active/passive pair AnyConnect SSL

  Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you

  Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference

  So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• License problem of security context for Cisco ASA 5585

  Hello

  Can someone help me in license number for the ASA 5585 security environment,

  We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.

  When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.

  Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?

  Please advise me on this.

  Thanks in advance!

  Kind regards

  Kam

  Hello

  This should probably not be handled with Cisco directly or through the company that got you the license.

  To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.

  I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.

  While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC

  Check this document:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400

  -Jouni

• IPSEC not Pkts on Cisco ASA

  Hi, please I need a help.

  I have an IPSEC tunnel with my Cisco ASA and a PFsense Peer, VPN is to include phase 2.

  But I could not send pkts on this VPN.

  My internal network - 10.2.0.0/17, 172.31.2.2/32 customer network

  ==========================

  FW - counterpart of the ipsec VPN - 01 # sho 177.154.83.34
  address of the peers: 177.154.83.34
  Tag crypto map: outside_map0, seq num: 4, local addr: 200.243.146.20

  access extensive list ip 10.2.0.0 outside_cryptomap_8 allow 255.255.128.0 host 172.31.2.2
  local ident (addr, mask, prot, port): (10.2.0.0/255.255.128.0/0/0)
  Remote ident (addr, mask, prot, port): (172.31.2.2/255.255.255.255/0/0)
  current_peer: 177.154.83.34

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
        #pkts decaps: 2957, #pkts decrypt: 2957, #pkts check: 2957
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 1

  local crypto endpt. : 200.243.146.20/0, remote Start crypto. : 177.154.83.34/0
  Path mtu 1500, fresh ipsec generals 74, media, mtu 1500
  current outbound SPI: C1A13463
  current inbound SPI: 5B6B0EAB

  SAS of the esp on arrival:
  SPI: 0x5B6B0EAB (1533742763)
  transform: aes-256-esp esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 9179136, crypto-card: outside_map0
  calendar of his: service life remaining key (s): 858
  Size IV: 16 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0xFFFFFFFF to 0xFFFFFFFF
  outgoing esp sas:
  SPI: 0xC1A13463 (3248567395)
  transform: aes-256-esp esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 9179136, crypto-card: outside_map0
  calendar of his: service life remaining key (s): 858
  Size IV: 16 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0x00000000 0x00000001

  ===========================

  Entry packet - trace FW-VPN-01 # outside icmp 10.2.110.10 1 172.31.2.2 0

  Phase: 1
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 0.0.0.0 0.0.0.0 outdoors

  Phase: 2
  Type: ACCESS-LIST
  Subtype:
  Result: DECLINE
  Config:
  Implicit rule
  Additional information:

  Result:
  input interface: outdoors
  entry status: to the top
  entry-line-status: to the top
  output interface: outside
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  ===============================

  FW-VPN-01 # sho running-config | 177.154.83.34 Inc.
  outside_map0 card crypto 4 peers set 177.154.83.34
  internal GroupPolicy_177.154.83.34 group strategy
  attributes of Group Policy GroupPolicy_177.154.83.34
  tunnel-group 177.154.83.34 type ipsec-l2l
  tunnel-group 177.154.83.34 general-attributes
  Group - default policy - GroupPolicy_177.154.83.34
  IPSec-attributes tunnel-group 177.154.83.34

  ==============================

  FW-VPN-01 # sho running-config | 172.31.2.2 Inc.
  network 172.31.2.2_32 object
  Home 172.31.2.2
  access-list sheep extended 10.2.0.0 ip allow 255.255.128.0 host 172.31.2.2
  access extensive list ip 10.2.0.0 inside_access_in allow 255.255.128.0 object 172.31.2.2_32
  permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_5
  permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_8
  NAT (inside, all) source 10.2.0.0_17 destination 10.2.0.0_17 static static 172.31.2.2_32 172.31.2.2_32 non-proxy-arp-search to itinerary

  so you see the packets traverse your inside interface but no response back. Please check if you have a route to 172.31.2.2 host in your internal network pointing traffic to the ASA.

  the package shows plotter drop because you run of out-of-in and in this case, you must specifically that traffic on the acl allow external interface. When the real traffic arrives through vpn, it checks for sysopt and then the interface access list is bypassed. but when you do a package tracer, simulated package does not in reality of vpn and therefore we have that allow outside interface acl for package tarcer to enable.

• Documentation for cisco asa ipsec l2tp / windows 7

  Hello

  I need to configure a few cisco asa 5510's for remote access VPN using l2tp ipsec.  One of the requirements is that no additional vpn clients to connect.  We only use the client included in Windows 7 x 86.  Is there documentation on configuration of this device or a clear statement by saying that it is not taken in charge or possible yet?

  Thank you

  m.

  Hey well at least on the errors of phase 1 more.

  ASA is basically saying that's not the choice of the proposal.

  Here's what is configured...
  -------

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  -------

  Here is what is proped:

  -----

  (1) proposal payload

  Protocol-Id: PROTO_IPSEC_ESP

  Transform-Id: ESP_AES

  Encapsulation mode: the UDP Transport
  Key length: 128
  Authentication algorithm: SHA1

  (2) proposal payload

  Protocol-Id: PROTO_IPSEC_ESP

  Transform-Id: ESP_3DES

  Encapsulation mode: the UDP Transport
  Authentication algorithm: SHA1

  (3) proposal payload

  Protocol-Id: PROTO_IPSEC_ESP

  Transform-Id: ESP_DES

  Encapsulation mode: the UDP Transport
  Authentication algorithm: SHA1

  ------------------

  Please also visit:

  https://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html

  I see that you have 1 default set PFS is 0.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2193372

  NAT-traversal missing?

  https://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html#wp1046219

• Cisco ASA - l2l IPSEC tunnel two dynamic hosts

  Hello

  I have two firewall Cisco ASA an i want to made a l2l between two ipsec tunnel, the problem is that both parties have a dynamic IP, on both sides I have configured dyndns, can I did an ipsec tunnel using dyndns name such as address peer?

  Hello

  ASA supports only the RFC compliant method for updates used with dynamic DNS, not updates HTTP, such as dyndns.org and others use.
  i.e. https://tools.cisco.com/bugsearch/bug/CSCsk25102/?reffering_site=dumpcr

  On ASA, it is not possible to configure the tunnel between two dynamic peers.
  You will need to have a static end to configure static to dynamic IP.

  For routers, you can follow this link.
  I hope this helps.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• IPSec vpn cisco asa and acs 5.1

  We have configured authentication ipsec vpn cisco asa acs 5.1:

  Here is the config in cisco vpn 5580:

  standard access list acltest allow 10.10.30.0 255.255.255.0

  RADIUS protocol AAA-server Gserver

  AAA-server host 10.1.8.10 Gserver (inside)

  Cisco key

  AAA-server host 10.1.8.11 Gserver (inside)

  Cisco key

  internal group gpTest strategy

  gpTest group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list acltest

  type tunnel-group test remote access

  tunnel-group test general attributes

  address localpool pool

  Group Policy - by default-gpTest

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  accounting-server-group Gserver

  IPSec-attributes of tunnel-group test

  pre-shared-key cisco123

  GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.

  When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get

  error:

  22040 wrong password or invalid shared secret

  (pls see picture to attach it)

  the system still works, but I don't know why, we get the error log.

  Thanks for any help you can provide!

  Duyen

  Hello Duyen,

  I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.

  Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.

  Please remove the authorization under the Tunnel of Group:

  No authorization-server-group Gserver

  Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.

  Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.

  I hope this helps.

  Kind regards.

• IPSec VPN between Cisco ASA and Fortigate1000

  Hello

  I find a useful document on how to create a tunnel VPN IPSec with ASA 5510 firewall Fortigate 1000...

  the configuration of the coast FG is done without any problem, BUT the document (. doc FG) said I must configure the ASA with a GRE interface and assign an internal IP address in order to communicate with the FG...

  The question is: How do I configure the interface on the SAA ACCORD?

  Thanks in advance, Experts...

  Kind regards...

  ASA firewall does not support the interface/GRE GRE tunnel.

  If you need to have GRE configured, you will need to complete the GRE tunnel on router IOS.

  If you want to configure just pure tunnel VPN IPSec (lan-to-lan), here is an example of configuration on the side of the ASA:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080950890.shtml

  Hope that helps.

• To activate SSL license on cisco ASA

  Hello

  I ordered ASA with 50 ssl licneses.

  But due to the avialibilty of the product it shipping for me.

  I was delivered with the ASA with basic license is to say ASA - Bun - like SSL license K8.Then will take some time I was given a temporary license/activation key.

  Can someone let me know how to enable these licenses to begin work on SSL. My camera isn't in production right now.

  I will get permanent license in 3-4 weeks and still once I need it at this time here for the new license.

  Hope that the procedure would be more or less the same.

  Please guide.

  Reg,

  Sushil

  Sushil

  Check out this doc and come back if you have any other questions.

  Activation of licence ASA

  Jon

• enabling remote vpn Cisco asa

  Dear team,

  I have a Cisco asa firewall, I would enable remote vpn (ssl vpn or customer).

  Please check the joint view version and suggest which are missing or need to enable them.

  Therefore, I will obtain concrete results and enable VPN.

  concerning

  SecIT

  With the license and the software version you have, you can only run the existing IPsec VPN client.

  To run AnyConnect SSL VPN client-based, you must acquire a license AnyConnect Essentials. For your platform that would be L-ASA-AC-E -5550=. (Clientless SSL VPN would be a different reference number.)

  I also suggest upgrading your system beyond 8.2 software (2) the current recommended release would be 9.0 (3). (9.1 (5) is the last on the 5550.)

• AnyConnect VPN for Cisco ASA 5505 refused connections

  I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access.  Here is the relevant information of my config:

  interface Vlan2
  
      mac-address xxxx.xxxx.xxxx
  
      nameif outside
  
      security-level 0
  
      ip address A.A.A.A 255.255.255.240
  
      !
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq https
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq https
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq www
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
  
      access-list outside_access_in extended permit icmp any any
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
  
      access-list outside_access_in extended permit gre any host C.C.C.C
  
      access-list outside_access_out extended permit ip any any
  
      access-list inside_access_in extended permit ip any any
  
      access-list inside_access_in extended permit ip any interface outside
  
      access-list inside_access_out extended permit ip any any
  access-group inside_access_in in interface inside
  
      access-group inside_access_out out interface inside
  
      access-group outside_access_in in interface outside
  
      access-group outside_access_out out interface outside
  webvpn
  
      enable inside
  
      enable outside
  
      svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
  
      svc enable
  group-policy DfltGrpPolicy attributes
  
      dns-server value X.X.X.X
  
      vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
  
      split-tunnel-policy tunnelspecified
  
      split-tunnel-network-list value
  
      address-pools value palm
  
      webvpn
  
        svc rekey time 30
  
        svc rekey method ssl
  
        svc ask enable default webvpn
  policy-map global_policy
  
      class inspection_default
  
        inspect pptp
  
        inspect http
  
        inspect icmp
  
        inspect ftp
  
      !
  

  When I try to connect, I get this error in the real-time log viewer:

  TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443
  

  Here are the details of the license:

  Licensed features for this platform:
  
      Maximum Physical Interfaces  : 8
  
      VLANs                        : 3, DMZ Restricted
  
      Inside Hosts                 : Unlimited
  
      Failover                     : Disabled
  
      VPN-DES                      : Enabled
  
      VPN-3DES-AES                 : Enabled
  
      SSL VPN Peers                : 2
  
      Total VPN Peers              : 10
  
      Dual ISPs                    : Disabled
  
      VLAN Trunk Ports             : 0
  
      Shared License               : Disabled
  
      AnyConnect for Mobile        : Disabled
  
      AnyConnect for Linksys phone : Disabled
  
      AnyConnect Essentials        : Disabled
  
      Advanced Endpoint Assessment : Disabled
  
      UC Phone Proxy Sessions      : 2
  
      Total UC Proxy Sessions      : 2
  
      Botnet Traffic Filter        : Disabled
  This platform has a Base license.
  

  Can someone tell me what I am doing wrong or what access list I'm missing?

  I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.

  Hi Matt,

  You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:

  WebVPN

  tunnel-group-list activate

  Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.

  HTH

  Herbert

• Cisco ASA 5505 VPN Site to Site

  Hi all

  First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

  I'd appreciate any help that can be directed to this problem please.  Slowly losing my mind

  Please see details below:

  Two ADMS are 7.1

  IOS

  ASA 1

  Nadia

  :

  ASA Version 9.0 (1)

  !

  hostname PAYBACK

  activate the encrypted password of HSMurh79NVmatjY0

  volatile xlate deny tcp any4 any4

  volatile xlate deny tcp any4 any6

  volatile xlate deny tcp any6 any4

  volatile xlate deny tcp any6 any6

  volatile xlate deny udp any4 any4 eq field

  volatile xlate deny udp any4 any6 eq field

  volatile xlate deny udp any6 any4 eq field

  volatile xlate deny udp any6 any6 eq field

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  link Trunk Description of SW1

  switchport trunk allowed vlan 1,10,20,30,40

  switchport trunk vlan 1 native

  switchport mode trunk

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  No nameif

  no level of security

  no ip address

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 92.51.193.158 255.255.255.252

  !

  interface Vlan10

  nameif inside

  security-level 100

  IP 192.168.10.1 255.255.255.0

  !

  interface Vlan20

  nameif servers

  security-level 100

  address 192.168.20.1 255.255.255.0

  !

  Vlan30 interface

  nameif printers

  security-level 100

  192.168.30.1 IP address 255.255.255.0

  !

  interface Vlan40

  nameif wireless

  security-level 100

  192.168.40.1 IP address 255.255.255.0

  !

  connection line banner welcome to the Payback loyalty systems

  boot system Disk0: / asa901 - k8.bin

  passive FTP mode

  summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  domain-lookup DNS servers

  DNS lookup domain printers

  DNS domain-lookup wireless

  DNS server-group DefaultDNS

  Server name 83.147.160.2

  Server name 83.147.160.130

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  ftp_server network object

  network of the Internal_Report_Server object

  Home 192.168.20.21

  Description address internal automated report server

  network of the Report_Server object

  Home 89.234.126.9

  Description of server automated reports

  service object RDP

  service destination tcp 3389 eq

  Description RDP to the server

  network of the Host_QA_Server object

  Home 89.234.126.10

  Description QA host external address

  network of the Internal_Host_QA object

  Home 192.168.20.22

  host of computer virtual Description for QA

  network of the Internal_QA_Web_Server object

  Home 192.168.20.23

  Description Web Server in the QA environment

  network of the Web_Server_QA_VM object

  Home 89.234.126.11

  Server Web Description in the QA environment

  service object SQL_Server

  destination eq 1433 tcp service

  network of the Demo_Server object

  Home 89.234.126.12

  Description server set up for the product demo

  network of the Internal_Demo_Server object

  Home 192.168.20.24

  Internal description of the demo server IP address

  network of the NETWORK_OBJ_192.168.20.0_24 object

  subnet 192.168.20.0 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_26 object

  255.255.255.192 subnet 192.168.50.0

  network of the NETWORK_OBJ_192.168.0.0_16 object

  Subnet 192.168.0.0 255.255.0.0

  service object MSSQL

  destination eq 1434 tcp service

  MSSQL port description

  VPN network object

  192.168.50.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_24 object

  192.168.50.0 subnet 255.255.255.0

  service object TS

  tcp destination eq 4400 service

  service of the TS_Return object

  tcp source eq 4400 service

  network of the External_QA_3 object

  Home 89.234.126.13

  network of the Internal_QA_3 object

  Home 192.168.20.25

  network of the Dev_WebServer object

  Home 192.168.20.27

  network of the External_Dev_Web object

  Home 89.234.126.14

  network of the CIX_Subnet object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_84.39.233.50 object

  Home 84.39.233.50

  network of the NETWORK_OBJ_92.51.193.158 object

  Home 92.51.193.158

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq netbios-ssn service

  the purpose of the tcp destination eq smtp service

  service-object TS

  the Payback_Internal object-group network

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_3

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  service-object TS

  service-object, object TS_Return

  object-group service DM_INLINE_SERVICE_4

  service-object RDP

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  object-group service DM_INLINE_SERVICE_5

  purpose purpose of the MSSQL service

  service-object RDP

  service-object TS

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service DM_INLINE_SERVICE_6

  service-object TS

  service-object, object TS_Return

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  Note to outside_access_in to access list that this rule allows Internet the interal server.

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-list of FTP access

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list of SMTP access

  Note to outside_access_in to access list Net Bios

  Comment from outside_access_in-SQL access list

  Comment from outside_access_in-list to access TS - 4400

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

  access host access-list outside_access_in note rule internal QA

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

  Notice on the outside_access_in of the access-list access to the internal Web server:

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

  Note to outside_access_in to access list rule allowing access to the demo server

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list to access MSSQL

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

  Note to outside_access_in access to the development Web server access list

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

  AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

  AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

  Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

  permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

  pager lines 24

  Enable logging

  information recording console

  asdm of logging of information

  address record

  [email protected] / * /.

  the journaling recipient

  [email protected] / * /.

  level alerts

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 servers

  MTU 1500 printers

  MTU 1500 wireless

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-711 - 52.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (wireless, outdoors) source Dynamics one interface

  NAT (servers, outside) no matter what source dynamic interface

  NAT (servers, external) static source Internal_Report_Server Report_Server

  NAT (servers, external) static source Internal_Host_QA Host_QA_Server

  NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

  NAT (servers, external) static source Internal_Demo_Server Demo_Server

  NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  NAT (servers, external) static source Internal_QA_3 External_QA_3

  NAT (servers, external) static source Dev_WebServer External_Dev_Web

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  Enable http server
  http 192.168.10.0 255.255.255.0 inside
  http 192.168.40.0 255.255.255.0 wireless
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 84.39.233.50
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 192.168.10.0 255.255.255.0 inside
  SSH 192.168.40.0 255.255.255.0 wireless
  SSH timeout 5
  Console timeout 0

  dhcpd 192.168.0.1 dns
  dhcpd outside auto_config
  !
  dhcpd address 192.168.10.21 - 192.168.10.240 inside
  dhcpd dns 192.168.20.21 83.147.160.2 interface inside
  paybackloyalty.com dhcpd option 15 inside ascii interface
  dhcpd allow inside
  !
  dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
  dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
  dhcpd update dns of the wireless interface
  dhcpd option 15 ascii paybackloyalty.com wireless interface
  dhcpd activate wireless
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal Payback_VPN group strategy
  attributes of Group Policy Payback_VPN
  VPN - 10 concurrent connections
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
  attributes of Group Policy DfltGrpPolicy
  value of 83.147.160.2 DNS server 83.147.160.130
  VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
  internal GroupPolicy_84.39.233.50 group strategy
  attributes of Group Policy GroupPolicy_84.39.233.50
  VPN-tunnel-Protocol ikev1, ikev2
  Noelle XB/IpvYaATP.2QYm username encrypted password
  Noelle username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
  Éanna attributes username
  VPN-group-policy Payback_VPN
  type of remote access service
  Michael qpbleUqUEchRrgQX of encrypted password username
  user name Michael attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
  user name Danny attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
  user name Aileen attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
  Aidan username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  shane.c iqGMoWOnfO6YKXbw encrypted password username
  username shane.c attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Shane uYePLcrFadO9pBZx of encrypted password username
  user name Shane attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, encrypted James TdYPv1pvld/hPM0d password
  user name James attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Mark yruxpddqfyNb.qFn of encrypted password username
  user name brand attributes
  type of service admin
  username password of Mary XND5FTEiyu1L1zFD encrypted
  user name Mary attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
  Massimo username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  type tunnel-group Payback_VPN remote access
  attributes global-tunnel-group Payback_VPN
  VPN1 address pool
  Group Policy - by default-Payback_VPN
  IPSec-attributes tunnel-group Payback_VPN
  IKEv1 pre-shared-key *.
  tunnel-group 84.39.233.50 type ipsec-l2l
  tunnel-group 84.39.233.50 General-attributes
  Group - default policy - GroupPolicy_84.39.233.50
  IPSec-attributes tunnel-group 84.39.233.50
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the pptp
  inspect the rsh
  inspect the rtsp
  inspect the sip
  inspect the snmp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect xdmcp
  inspect the icmp error
  inspect the icmp
  !
  service-policy-international policy global
  192.168.20.21 SMTP server
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

  ASA 2

  ASA Version 9.0 (1)

  !

  Payback-CIX hostname

  activate the encrypted password of HSMurh79NVmatjY0

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  Description this port connects to the local network VIRTUAL 100

  switchport access vlan 100

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  switchport access vlan 100

  !

  interface Ethernet0/4

  switchport access vlan 100

  !

  interface Ethernet0/5

  switchport access vlan 100

  !

  interface Ethernet0/6

  switchport access vlan 100

  !

  interface Ethernet0/7

  switchport access vlan 100

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 84.39.233.50 255.255.255.240

  !

  interface Vlan100

  nameif inside

  security-level 100

  IP 192.168.100.1 address 255.255.255.0

  !

  banner welcome to Payback loyalty - CIX connection line

  passive FTP mode

  summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group defaultDNS

  Name-Server 8.8.8.8

  Server name 8.8.4.4

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the host-CIX-1 object

  host 192.168.100.2

  Description This is the VM server host machine

  network object host-External_CIX-1

  Home 84.39.233.51

  Description This is the external IP address of the server the server VM host

  service object RDP

  source between 1-65535 destination eq 3389 tcp service

  network of the Payback_Office object

  Home 92.51.193.158

  service object MSQL

  destination eq 1433 tcp service

  network of the Development_OLTP object

  Home 192.168.100.10

  Description for Eiresoft VM

  network of the External_Development_OLTP object

  Home 84.39.233.52

  Description This is the external IP address for the virtual machine for Eiresoft

  network of the Eiresoft object

  Home 146.66.160.70

  Contractor s/n description

  network of the External_TMC_Web object

  Home 84.39.233.53

  Description Public address to the TMC Web server

  network of the TMC_Webserver object

  Home 192.168.100.19

  Internal description address TMC Webserver

  network of the External_TMC_OLTP object

  Home 84.39.233.54

  External targets OLTP IP description

  network of the TMC_OLTP object

  Home 192.168.100.18

  description of the interal target IP address

  network of the External_OLTP_Failover object

  Home 84.39.233.55

  IP failover of the OLTP Public description

  network of the OLTP_Failover object

  Home 192.168.100.60

  Server failover OLTP description

  network of the servers object

  subnet 192.168.20.0 255.255.255.0

  being Wired network

  192.168.10.0 subnet 255.255.255.0

  the subject wireless network

  192.168.40.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the Eiresoft_2nd object

  Home 137.117.217.29

  Description 2nd Eiresoft IP

  network of the Dev_Test_Webserver object

  Home 192.168.100.12

  Description address internal to the Test Server Web Dev

  network of the External_Dev_Test_Webserver object

  Home 84.39.233.56

  Description This is the PB Dev Test Webserver

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_2

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_3

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_4

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_5

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_6

  service-object MSQL

  service-object RDP

  the Payback_Intrernal object-group network

  object-network servers

  Wired network-object

  wireless network object

  object-group service DM_INLINE_SERVICE_7

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_8

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_9

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_10

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_11

  service-object RDP

  the tcp destination eq ftp service object

  outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

  Note to access list OLTP Development Office of recovery outside_access_in

  outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

  Comment from outside_access_in-access Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

  Note to outside_access_in access to OLTP for target recovery Office Access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

  Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

  outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

  Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

  outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

  Note to outside_access_in access from the 2nd IP Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

  outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

  NAT (inside, outside) static source Development_OLTP External_Development_OLTP

  NAT (inside, outside) static source TMC_Webserver External_TMC_Web

  NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

  NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

  NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  Enable http server

  http 92.51.193.156 255.255.255.252 outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 92.51.193.158
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 92.51.193.156 255.255.255.252 outside
  SSH timeout 5
  Console timeout 0

  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal GroupPolicy_92.51.193.158 group strategy
  attributes of Group Policy GroupPolicy_92.51.193.158
  VPN-tunnel-Protocol ikev1, ikev2
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  tunnel-group 92.51.193.158 type ipsec-l2l
  tunnel-group 92.51.193.158 General-attributes
  Group - default policy - GroupPolicy_92.51.193.158
  IPSec-attributes tunnel-group 92.51.193.158
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
  : end

  Hello

  There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

  All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

  Here are a few suggestions on what to change

  ASA1

  Minimal changes

  the object of the LAN network

  192.168.10.0 subnet 255.255.255.0

  being REMOTE-LAN network

  255.255.255.0 subnet 192.168.100.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

  Other suggestions

  These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

  PAT-SOURCE network object-group

  source networks internal PAT Description

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  no nat (wireless, outdoors) source Dynamics one interface

  no nat (servers, outside) no matter what source dynamic interface

  The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

  Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

  network of the SERVERS object

  subnet 192.168.20.0 255.255.255.0

  network of the VPN-POOL object

  192.168.50.0 subnet 255.255.255.0

  NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

  no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  ASA2

  Minimal changes

  the object of the LAN network

  255.255.255.0 subnet 192.168.100.0

  being REMOTE-LAN network

  192.168.10.0 subnet 255.255.255.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM.

  Other suggestions

  PAT-SOURCE network object-group

  object-network 192.168.100.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

  Hope this makes any sense and has helped

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• Cisco asa geo blocking.

  Is there a way by which we can block all connections from a country on Cisco ASA, without us manually define an ACL.

  Hardware Cisco ASA5510-

  -Version 9.0

  N °

  This kind of functionality is available in newer models (ASA 5500 - X series) when you add modules of services of firepower with their associated licenses.

  They can download and automatically update a database of geolocation you can use in your access policy.