life cycle has stopped working

Similar Questions

• Time capsule has stopped working

  Time capsule has stopped working. No orange or green light. Food is the device. Is there a fuse that might be blown? Reset it would bring to life?  Is it possible to get the backup data stored on it?

  Is there a fuse that might be blown?

  Sorry, but no.

  Reset it would bring to life?

  No, unfortunately it wouldn't be possible to reset the time Capsule if it will feed at all.

  Is it possible to get the backup data stored on it?

  Open the Capsule and remove the hard drive. Place the disk into a USB to SATA cart and which connect to your Mac.  Here, I'm assuming that the Time Capsule is not yet covered by warranty or the AppleCare, as it opens the warranty, if it is still covered.

  If you could post back with the model number of the Capsule of time... it is on the lower part of the device, probably embedded in the foam pad base, and begins with an 'A' followed by four numbers... we may have some additional information or advice for you depending on the model you have.

• HP20: Windows Explorer has stopped working, followed by windows explore restarts

  Hello everyone, a few days my computer began to behave strangely. When you try to download some pictures using Chrome, windows Explorer has crashed, and a pop-up will appear showing the message: "Windows Explorer has stopped working". A few seconds after that, the entire desktop up-to-date and another window poped by displaying "Windows Explorer restarts... ».

  The cycle of two windows appearing repeatedly. I restarted the computer as soon as it shows the office, the same thing happens again, to infinity.

  I was able to restart the computer by using the security mode, it works just fine. I've disabled most of the software at startup, except 360 total security anti virus. It has not solved the problem.

  Does anyone have a solution for this? Thank you very much for any help!

  Matheus

  Hi old_geekster, I tried what you said and it did not work. However, I then found the original source of microsoft where you got this info from, and they mention here on a corrupted video driver as a source as possible. That was the problem in my case: radeon tried to update earlier this week, but I was in a hurry and it did not properly. I tried again and it worked now!

  Thnaks for your help, even if not exactly what I needed, it solved my problem!

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• LifeCam-vx1000 has stopped working Windows Vista

  I have a lifecam vx1000. It worked, but I haven't used for awhile and now I get the error "lifecam.exe has stopped working, the program will close." I've tried uninstalling and reinstalling the software, change the port usb... nothing works... Thank you

  UPDATE:
  I tried to open the Lifecam and this is where the error... does not work with Skype, but will work with Dell chat...

  Hello

   

  Method 1:

  Perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to restore the computer to a normal startup.

  Alternatively, you can perform system restore to restore your system to a time where everything worked well.
   
  For more information about how to run the system restore, refer to the link below:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2:
  I also suggest you check in Manager devices if the cam of life appears there or not.

  To open the Device Manager check out the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Once you open Device Manager search for life Cam and check if you find bags of yellow or red exclamation on it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: 
  Check out the link provided below to solve the issues relate to life Cam.
   
  http://support.Microsoft.com/kb/929087
   
  You can also check out the link below to manually download the latest version of the software for your Microsoft life Cam.
   
  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  For more information, see the link below,

  http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx

• Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%

  original title: Windows Vista Ugh.

  I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards.  Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer.  I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer.  I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away.  Help, please.

  Check here the answer to the similar problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/popup-box-says-Windows-module-installer-has/ae2fbeba-6f15-4676-8ddc-9cd926a79730

  Tom Ferguson

  PS

  I've seen many references to Vista but Vista ugh is new to me. ;-)

  TF

• After you install Internet Explorer 9 Windows Explorer has stopped working

  All since I installed IE9 my windows Explorer has stopped working. Help, please!

  * original title - installed IE 9 & windows Explorer has stopped working. someone please throw me a life line.*

  Hi LesterHilliard,

  You have installed the final version of Internet Explorer 9?  See the following article for more details:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  I hope this helps!

• "License for this product has stopped working" message whenever I open Acrobat Pro.

  "License for this product has stopped working" message whenever I open Acrobat Pro.  I am at a loss on how to solve the problem.  Can anyone provide some ideas?

  Thanks Bill.  After a good night's rest that I don't think I'm as big of a fight with Adobe as I was yesterday.  I could browse the search results with more patience and found these instructions:

  Error "Licensing has stopped working". Windows

  My problem was resolved after the first step.  Thank you.  Life is much more peaceful when do the things that are supposed to work.

• Error "Adobe Media Core CS6 has stopped working".

  I had the first 11 elements, Photoshop Elements and LR 4 installed for over a year on my Windows 7 computer. Over the past couple months, minutes to turn on my computer, I get an error that Adobe Media Core CS6 has stopped working. It seems that this could be linked to the first, but I was not able to find a solution. This happens even if I didn't run one of my installed programs. Any suggestions what is causing this and how to fix it?

  I hadn't saved the files detail earlier today (it seems that they disappear on a reboot), but made a stop/start there is little time and had a relapse again. (Although two subsequent cycles has not generated the error.) I saved the files and the .xml file specifies the parent process has been organizing of 11 items this time, no LR4.

  I lived with this problem for a while, one of the set of sets of files recorded error was 5: 1. I don't remember for sure if it was the first occurrence of the error, but I decided to look for other installed programs just before that time. I see that Adobe Creative Cloud has been installed the day before, 4/30. I do not how/why that was installed since I have no product of cloud. Also installed 4/30 were three files Microsoft Visual C++ Redistributable, which show the installation time a minute before the installation of creative cloud, so I guess they are part of the installation of cloud. The next most recent installed program (before 5/1) was Smith Micro Anime Studio Pro 9.5, which was installed on 4/29.

  The firewall settings have not changed. I was in a conversation with my ISP when the problem occurred this afternoon, but not during the last occurrence. I remember no updates since 6/24. I think that the error everytime I started my previous changes to firewall computer, but it seems to be more sporadic now.

  I'll see what I can find tomorrow since it's getting late. I wanted to get it all the way until I lost my thoughts.

  Last updated 7/5:

  I have more information, but still no solution.

  I found this thread that adobe Media Core CS6 has stopped working , associated with the same error, but he had no solution. The error occurred when I left the PS Elements or Premiere Elements as it has done for that person.

  I also found Adobe media base cs6 not working anymore...? and I tried the steps to rebuild the preferences file in the editor of Photoshop Elements, but without success.

  I noticed that Adobe Creative Cloud has been installed the day before, so I uninstalled. Always error.

  I installed another firewall (Zone Alarm Free) and disabled Windows Defender error persists.

  Uninstalled Anime Studio Pro (which had been installed a few days before, always error.

  I'll give you more updates as I try more changes.

  Update 7/20:

  I tried more things:

  Fixed quicktime via Control Panel, has not set

  Uninstalled quicktime, error does not recur

  I noticed that there is a plug-ins folder in the folder of quicktime, so I've renamed it.

  Reinstalled quicktime from the Apple site on 7/12 and the CS6 error has not re-emerged.

  Info additional non directly related to the initial question, is produced later.

  I don't think it's connected, but a few days later started having a small window MFC CTxfiHlp empty at windows startup. I've yet to resolve who, but it is related to my his Creative XFi card.

  I also noticed when I reinstalled Anime Studio Pro that the readme file contains a warning that windows 64-bit is not compatible quicktime; that I have to use the 32-bit version of their software.

  I installed the latest software version of the Creative sound card, but began to have blocking problems. Still working on it, but the original problem seems to be resolved.

  The only other thing I can think is that the iTunes software had been installed, but I removed it. It is possible that caused a problem with quicktime?

  In any case, the removal of quicktime (including Plug-Ins) and re - install has solved my problem.

• Screen touch Inspiron 2350 has stopped working

  A few days ago I started my Inspiron 2350 and the touch screen does not work.

  It doesn't seem to be a clear answer as to why it stopped working or a general framework that will allow me to fix it.

  In addition, under my current computer information / drivers, the computer does not recognize a touchscreen... that laugh because the monitor is attached to the base of the computer.

  If I had to guess, based on the horrible criticism from Windows, I'm sure something is automatically updated to Windows and launched. I am currently operating on 8.1 - and since I out took it of the box three months ago. This problem started last week.

  Thanks for any help.

  p.s. the monitor driver says that it works properly and is up-to-date.

  I'm having exactly the same issues over the past months... In my opinion, to do with automatic shutter windows 8.1 update as well. I have re-installed to make the adjustment and then touch screen reworked. Then windows update automatic, touch has stopped working again. Repetitive cycles, it seems that Dell could not have intended to solve this problem at all. The last pilot patch file was last year... they never update it... I remember my first PC of Intel4 Dell, purchased at the College; She was flawed with driver problems through my 4 years in College; completely lost my parent$ 1700, ten years ago... I do not understand how my wife of Mac user to make me buy another dell again (because I told him I'm a PC person?) ... my final solution can be... support of stop 1.) calling Dell technology, these people have probably even high school, 2) switch to Mac and never re-use a PC... 3.) oh, I sell my stock Dell too... Stop wasting our lives to find a solution for this... how long did you spend YOU on this problems so far?

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

• iMovie has stopped working since iOS 10

  iMovie has stopped working since iOS 10

  Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

  Hello iMovie does not work,

  After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
  I recommend you read these articles, there are a few things that we can try to get the application running again.

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support
  Restart your iPhone, iPad or iPod touch - Apple Support

  If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

  Thank you for using communities of Apple Support. Good day.