Light flashing on the printer

Similar Questions

• The yellow light flashes on the printer.

  Original title: Printer problems

  My printer print 1 page very well then the printer sounded like he wanted to do more printing, even though I only asked for 1. Now, the lite flashes yellow. I checked this: no paper jam. I cancelled all print jobs, just in case, although none showed. I disabled all the equipment, restarted and yellow button continues to Flash. The ink cartridge is new. I asked Windows Help for printer problems, none is shown. I asked Microsoft to help you, no answer. Any help is greatly appreciated. Just know that I'm not a cranky then please use the current language if you answer. Thank you. Jean

  Hi John,.

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you have problems with the printer.

  Please answer these questions to better understand the issue:

  1. What is the brand and model of the printer?

  2 have you referred to the manual that came with the printer?

  3. have you tried to contact the manufacturer of the printer?

  If the printer has an orange light flashing, this may mean that the printer has an internal condition 'fault' which is found only in the printer itself.

  I suggest you contact the manufacturer of the printer for more help.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Changed to Comcast modem / gateway of the infinite. Ethernet cable lights are at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to the GREEN?

  Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?

  Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.

• router and modem lights are flashing and the printer does not work wireless and system said detection of problems

  Cannot communicate with the printer wireles or pluged.  Lights suggesting that something is not connected correctly.

  Check with the manufacturer of the router/modem, or if it is provided by an access provider, ask your ISP.  Flashing lights definitely have a meaning and if deciphered will tell you what does not work correctly or well connected.

• Fill the cartridges of ink on deskjet 9800. Red light flashing, won't print. Always worked before.

  Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx

  The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable.  There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary.  There is also a post here that shows how to solve one of the problems mishandling can cause.  Do not clean the Strip unless necessary.

  The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:

  • Prints "stairs" to the bottom of the left margin of the self-test page.
  • The margins left or right of the self-test are not properly placed.
  • Ink cartridges carriage slams on the left side of the printer.
  • Automatic test double-print or obscured shows the letters.
  • Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
  • Printing stops and the lights of the Control Panel on the printer indicate an error.
  • Gaps appear in the printed text or images.
  • Slow printing

  CAUTION:

  Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.

   

• HP DeskJet 460 - lights flashing, won't print

  
  

  Hi warringtonsaint,

  Remove the cartridges from the printer, then check again there is no little pieces of paper in the printer. Turn the printer off for 1-2 minutes and then turn it back on. I would like to know if you still have the same blinking lights without the cartridges installed?

  Flashing lights

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• HP Officejet 6500 E709n Console lights flashing & is not printing

  HP Officejet 6500 E709n stopped working yesterday and almost all of the lights on the console keep flashing continuously.  I get a message on the display to turn off, then turn it on but it still does the same once I do this.

  I have sought and found how to use # and 3 keys for a partial resets when you plug back in the power supply, but after I did it is still the same as before?

  I unplugged the power supply and all the rest and sit all night and this morning it did the same thing.

  Is it possible to do a complete reset instead of a part of the console?

  Thank you

  Ken

  OK tried to edit the post previous to add to this, but has not see a button "Edit"?

  So I got the printer Open as when you change cartredges and noticed that the print heads has not moved at the Center as usual?  Tried moving the print head with my hand and he moved only about 1/4 "back and all of a sudden the print head moved to the center that he assumed?  Closed the top and crossed a calibration and then printed that and now it works again.  Go figure!

  I guess that's a mechanical and electrical/electronic problem rather than something.  I looked and didn't see anything wrong with gears and stuff on top so it can be one problem somewhere else.

  Ennywho, I will continue to use it like that too long it will work.

  Thank you

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• HP8300 - green light flashing on the motherboard and PC do not work

  Hello

  yesterday, I changed the power supply of my HP 8300 with a new office.

  the computer has been disconnected from a week of power supply (230 VAC).

  Now it does not work when I press the Start button. No noise, flashing on the front.

  On the motherboard there is a green led flashing (close to the led, there are 2 Word: to THE and CATERR #).

  I tried to change the power cable. No change.

  I tried to remove the RAM. No change.

  I've read other post on this forum.

  What is the small battery on the motehrboard? Can I leave the pc connected to the power supply, or did it damage?

  Thank you

  Hi PerottoG, I'm sorry to hear you're having feeding problems with your HP pc.  Please click on the link I provided to trouble shoot to issue food supply.  http://goo.GL/IkP9Nh

  If you have any other questions or if your problem is not resolved, please do not hesitate to write back and I'll be happy to do more research on the issue.

  Thank you

  Waterboy71

• BlackBerry Smartphones HELP incator blue light flashes all the time and I am disabled Bluetooth

  My blue light flashes and I am disabled Bluetooth.  Suggestions - it's driving me bananas

  Thank you

  I first try a hard reset, just take out your battery for about 5 seconds and could again. Usually, which solves a lot of problems. If it is still on, it may be a software problem, but is not certain.

• Satellite M105-S3074 - blue light flashes when the power supply cord plugged

  I have a Satellite M105-S3074 that when I plug in the power cord the blue left flashes just light and unit will not feed. When I unplug it from the laptop all lights go out and it is will not help here please

  Thank you

  Hello

  This means that your mobile doesn t boot with AC/DC adapter and AC/DC adapter too?
  Really strange what s

  Have you tried to remove the battery and the AC adapter? If you remove the two you should an hour and then reconnect the two. Maybe it will work.

  If this isn't the case, it seems to be a hardware problem. You must contact an authorized service provider, you can give them a call to speak to a technician.

• Too light to read the printer output.

  Most of the documents to print OK. However, answer box indications on labels printing is too light to read.

  Low to the attempt of ink filling or replacing your cartridges. If this post answers your question, click mark as answer .