Light problems

Similar Questions

• Toshiba Qosmio G50 - 12F - LCD light problems

  Hi everyone, I use to have problems with my laptop lcd light
  I used to change 3 new inverters and the problem is still there because it works very well Hi alternately dark and I am able to see very very low when I turn and on again once I turn on just for 5 or 10 seconds and turn dark again once I changed 3 inverters with similar without success When I unplug the main cable from the inverter and turn it on again it just turns on the light after a few seconds it darkens again
  any sugesstion what should I do if I have:
  change the ccfl
  change the complete LCD or
  change a motherboard

  No one has any idea what to do?

• Satellite A500-1EJ turns on itself - touchpad light problem

  Hello, I just bought a Satellite A500-1EJ and I have two problems:

  It lights by tself and volume and the light button does not work properly.

  Regarding the issue with automatic starups:
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=195616
  You must update the BIOS to the latest version to solve this problem

  > the volume and the light button does not work properly
  I don't know Mr. What volume or touchpad light you mean exactly and that is - this means not working properly?
  Perhaps you could be more specific and could provide more details

  Welcome them

• Low light problems?

  I bought a camera Sony TX100V USA Store. Everything is ok, good, but using low lighting, when I take a shoot in a place very dark and wide, this camera for a picture very much reflected light as a bubble of water on the image (I don't know, flash maybe). Now, I will send you pictures 02. You can see and check taken by me or the camera. Yes, by me, how to reset. Because it is the software of the camera (edit mode,...) or by material (objective,...) and how can I solve this problem?

  my configuration is: case flast auto, car of intelligence, EV 0, auto macro, auto face detection, automatic AF illuminator car of red eyes

  link 02 photos:

  http://img815.imageshack.us/img815/8591/dsc00403mg.jpg

  http://img692.imageshack.us/img692/2417/dsc00404sw.jpg

  If you need the original image, here:
  http://www.mediafire.com/?ng6t3sv77tkrd

  Thank you, best regards.

  Hello
  Welcome to the Forums of Discussion of the user.

  First of all. the white dots that you see in the picture are the reflections of dust of your flash.
  Second, if you take pictures of distant in a very dark frame objects, auto and flash are not recommended as you try to keep light natural lots you can.

  Here are two basic settings help you to: ISO and EV (opening)

  The ISO is a speed rating for recording media that incorporates an image sensor that receives light. Even when the exposure is the same images differ according to the ISO.
  ISO
  http://eSupport.Sony.com/docs/dvimag/DS... 13/13.html

  EV
  http://eSupport.Sony.com/docs/dvimag/DS... 12/12.html

  If manual is a bit too advanced, try to use the parameter of 'Twilight' or 'twilight pocket. "
  These scene selections will allow you to shoot scenes of night to a far distance (your pier is a good example of it) without losing the dark atmosphere of the surrounding area.

  several are on the settings here:
  http://eSupport.Sony.com/docs/dvimag/DS... 09/09.html

• Sony Ericsson XPERIA X 1 lighting problem

  One of the outdoor lighting LED four games seems to have failed. I used a lot of Sony Ericsson phones, and it's the first ever have a problem (probably because it was the one manufactured by HTC).

  No matter what other X 1 on agoraquest of owners who have had a similar problem?

  Thank you for your message. These forums are for Sony Vaio products and consumer only. Sony Ericsson have their own separate forums and are therefore better qualified to answer your questions, you can have on Sony Ericsson phones:

  http://talk.sonyericsson.com/community/support

• TP540p win8.1 update light problems?

  Hello

  update my new TP540p to win8.1 and problem awaken.

  I can not change the brightness and cannot turn out to fall asleep (System don't wake fuly, no picture just sound).

  After uninstall drivers and download brand new lenovo site support nothing has changed.

  I followed the tutorial on change of Microsoft Basic graphics card and the only idea that has happened is that when I press buttons for the brightness in the upper left icon showing that I do this, but light itself does not change.

  Help please?

  Thanks in advance.

  EDIT:

  Just trying to get back on the Intel back card and I lose information in the upper left corner on the use of keyboard shortcuts.

  SOLUTION:

  (1) disable the automatic installation of the driver.

  (2) delete the directory called drivers in c:\DRIVERS

  (3) remove drivers and check the delete option in the device for two graphics cards Manager.

  (4) install official drivers for lenovo to WIN8.1 site

  (5) make the coffee and relax the frustration

• Creation of red light problems

  I am currently working on a program to program a red light. I have attached a picture of what I'm trying to program. The problem is that I have no idea how the issue! I have a front set up with all the corresponding lights (red, yellow, green, left arrow turn) and a switch to indicate if a car is present to turn left. Now I'm not sure what I should do. I feel like I need to use a table for some time, certain registers at offset, as well as other things. If someone is able to help clarify an approach made me know!

  I use labview 8.5

  This looks like one of the old TCS example questions.  There is a huge thread about this here:

  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=316108&view=by_date_ascending&page=1

  There are solutions (official and users) given in this thread, but then I would try to work by yourself first.

• Linksys WAG120N DSL light problem

  Hello!

  Yesterday, I bought the Linksys Wireless - N Home ADSL2 + Modem Router WAG120N (version Annex-A). I have configured the modem/router and it worked very well. Today, I was surfing the internet just fine and I left my computer for a few minutes, when I came back I noticed that there is no internet connection. The internet light on the modem was no longer on, and the DSL one blinking. I turned off the unit and then it back on, but the question was always present. I tried to restore the default settings and configure the modem again, but nothing seems not to help (reset the modem, turn off all devices on it and reboot the modem/router). The DSL led keeps flashing and turns off a few seconds then flashes again. The internet light appears only when I restart the modem and it flashes in red just after turning on the unit. I thought that there is a problem with my ISP, but I plugged my previous modem and it works fine. I don't know what is happening. What is really weird, is that it was working fine yesterday and today, nothing seems to help. You guys have ideas, what can be the problem here?

  I agree that there is no problem with the connection to your ISP, since the old modem works fine. It might be really have something wrong with the WAG120N. Since you bought just a few days ago, be replaced by a new unit.

• Flashing fresh light problem

  I have a problem with my hp probook 4530 s. while I use the continuous orange light flashing load on the battery and if I stop the laptop he still continues to blink, orange, charge indicator light will continue to Flash until I have the battery.

  I tried to make the tour of 30 sec that most forums have asked, but I did not.

  try to update the bios it says that it is not compatible with your system.

  I used this version

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts...

  Help, please!

  Which always indicates a battery problem or a motherboard problem. Contact HP for warranty support.

  This is not a normal operating condition.

• Display light problem

  I have problem on my Aqua #XperiaM4, while I log all calls then the lights turned off and not ON HIS n gone gone.

  After a repair s/w it has been solved, thank you for your answer

• W520 CapsLock indicator light problem

  For some strange reason the light green/yellow for the caps lock remains the even if the caps lock is disabled. The functons works fine, it's just that the light at any time.

  Y at - it a fix for the problem?

  Thanks in advance.

  Since you have now asked this question, I don't know if you try this...

  But here's the information: http://lenovo.f.relayware.com/content/CourseWarePublic/6631/course%20files/index.html

  (The steps are almost identical)

• Light problem charge blackBerry Smartphones HS300

  Hello

  I bought a headset bluetooth hs300 last night.  I went to charge it and noticed there was no activity indicator LED.  The manual States that if it is charging green LED should Flash or stay on when completely charged.   I can confirm that the LED Green doesn't really work - it lights up when the load.  This problem persists when charging via USB or wall charger.  I'm afraid that the provided USB cord is bad and that I won't be able to charge the device.  I'll probably exchange the helmet today if someone can shed some light on the subject for me.  Thank you.

  I did the ultimate hardware reset in the end.  I returned it.  This one works perfectly.  I am impressed by the quality of the sound on a headset that has no specific to the noise filter circuit.  Works great, fantastic size, charge lasts forever.

• Alienware 14 lights problem

  I have 14 Alienware. I could have it for a while and I had no problem with it, but recently, when I turn on the light of my cell phone turned on for 2 seconds then they will switch off again, even if the Alien FX is on. I tried to uninstall the command center and install it again, but it did not work. any help please?

  Hello

  In the right corner of the Windows taskbar, you can have a little alien head icon. If you click on this icon, you should see a few options here. One of the options is 'Dim lighting areas. Try clicking on this option to see what is happening. We have a Dell article that explains the different settings you can check when there are problems with the AlienFX lighting. Click here to view the corresponding article.

• X 51 R2 light problem

  Hi guys,.

  Hope I'm writing this in the right section.

  I recently bought an Alienware X 51 R2. Turn on the PC for the first time, the lights on the system were all white. It seemed unusual for me at the time.

  Since then, I have tried all kinds of ways to change colors through the command center (think I reinstalled only about 4 times today already!). I had all the diagnostic tests and tried everything available on the Dell site, but nothing does, and I always remained with white lights.

  Anyone who has met or heard of this problem before? It sounds like a hardware failure or y at - it an easy solution that I have not yet tried?

  Any help would be much appreciated.

  Make sure you check out the staves of connector for lights and the ports on the motherboard as well. On my X 51 that I had replaced MB and after the panels LED USB ports were not working. It turns out the USB cable to the motherboard header was offset by 1 pin.  I moved it, then everything was fine.

• Alienware 14 Fx lighting problems

  Hello, I do not know really what to put as the subject, so will have to do. However, I have problems with the lights of FX. It seems that, out of the blue, they decided to not work. The lights for the; Keyboard, mouse pad, power, Logo, button...

  The only time wherever they work is when I go to the command center and choose a new color. Then close the command center, he will ask "Do you want to save this new theme" or something. If I choose Yes, FX lights will appear for just a second and then go back off. And they stay?

  Now, I did some research and I did not see the problem, however, I tried unistalling the command center and put it back, and it didn't fix it. So I don't really know what it is. I ran something question detect the Dell page. But he said everything was fine. I also checked if it was one of my energy, and I have it on high performance. I went from balanced high performance, to test, but that solves nothing.

  The only thing I could think of, but I'm not sure that it would have something to do with it, I went from my driver intel NVIDIA recently, but I doubt that it would have something to do with it.

  Help, please? Thank you.

  Edit:
  If it is a question where can I get just to do a factory reset, I need a guide on how to back up and restore, simply because I don't want to lose any important work I have, etc.

  First of all, is to make a backup.    There are ways to do it without having to buy the upgrade of Alienware ReSpawn.    Might look at things like:

  Because I buy Seagate drives to make the back to the top on.  I use the free product provided by Seagate to get a clone of my hard drive.   We install the Seagate Wizard disk to a work computer, and it allows you to create a stand alone backup CD which will make clones and restore the operating system to the clone.

  If you have not done so, it is also the time to create Windows restore DVD and CD repair of Windows, which is available through Alienware Respawn or Windows itself.

  All having a back up is always a good idea.   I want to make more than a backup, if I'm going to fool around with the operating system that you are about to do.   I like to make sure that at least one of my backups is a Clone, I distrust so backups of call time interval, as they find unique and creative ways to fail.  Even if they are necessary when there are just trying to permanently keep a backup and not running out a huge amount of space external hard drive.

  Search to find all the Activation/registration codes for all software products you have and put them together in a USB key and maybe on paper as well.  It's amazing how these things get lost when I was sure that I already have them in exactly one place.  I know that if you have Microsoft Office, if you did not buy Microsoft themselves, that Dell needs a very good reason for you give the activation code again.   (He came on a piece of paper in the box with the computer originally).   Similarly, make sure you have the Windows registration number.      Maybe need a registration code for you Antivirus and other things you buy, such as games.

  Then I suggest that you save a copy of the registry, as it is right now.   And make a point of checking system.   I haven't looked, but I think that Alienware support has a few really good writeups on how to do these things that is far superior to what I might write.   Plus, get a list of the ways to start the Alienware to different modes before you crush the BONES.

  After all, in my case, as I am still under warranty, I know that the best thing is to call Alienware technical support, let them Remote Desktop and see if they can fix it while you watch.

  If Alienware Tech support can't help, or you have no guarantee.  Then, it is possible to restore the operating system without rewriting of your personal data.  PHEW.  Most likely, the computer has made a point of system check when it installed a new video driver.   It is also possible to reinstall all the operating system at reception on the first day of computer and do not damage your personal data, i.e. without formatting the entire drive.    However, all third-party programs will not be there when the computer returns to the top.  If you need to reinstall these third-party programs and save/activate them.

  I think the guys at tech Alienware will come along and give you links for how to do to save a copy of the registry, how to start reinstalling the operating system and all their support stuff.

  What they can not mentioned, if you try to start the computer and press F to start one of the special programs associated with tinker BONES.  We often have to hold down the control key first, then press the power button.   You bought a fast computer, and it is faster than your ability to press the Power button and get to the function key in time.

  Best wishes.

  I should say one more thing, if you reinstall the operating system, you start the computer, and if the computer can find a way to connect, it is likely to interrupt from the desktop computer and the screen go black and remain black during the download of the OS and install things, like all Windows updates.  I think it's all night.  Gets the confusion he uses any encrypted WiFi connection that you previously had.  (Yes, funny, just reinstalled the operating system, she kept the password to an encrypted connection.)   and also because the computer screen can go into rest mode, so you could get to the top and the screen being black, while it is in fact not download, but you wait to tell him to turn it back on.   Do not let throw you the black screen, it's a normal part of Windows re-installation of updates.   Be better if it had a splash screen telling you what was going on.  I hope that ten Windows is better.   Sigh.   Could give you some comfort if you disable WiFi before you find the BONES, also unplug the cable.   then you should come first in the initial window more directly, but you will have to attend updates anyway. and black screen, to the

• New Alienware 14 lights problem

  I had my Alienware 14 for two days, but for some reason any external lighting I stop responding and are stuck on the same color. Some of the lights aren't on. I tried to change the Forex and it does nothing. If you can help I would like that. Thank you.

  Hi Teschke,

  Ask you to try following the underside of measures that could help:

  (1) uninstall/reinstall command center. You can refer the links that might help to uninstall below:

  http://Dell.to/1aw3dvr

  http://Dell.to/1aVUFlp

  (2) once this is done, you can use the link below and reinstall the new command centre:

  http://Dell.to/17p0F0r

  Select the version of operating system and find the command center in the application tab and download

  (3) now, restart the computer and check if the problem is resolved. If not you are trying to create a new theme in AlienFX (open Command Center-> enter AlienFX-> closing of the current theme-> create a new theme).

  If you have any other questions answer the same thread.