Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

Similar Questions

• Extremely slow Webhelp & amp; project does not respond

  I have a file Webhelp containing 270 topics. Two weeks ago, I imported about 50 Microsoft Word files using the RoboHTML to get instructions from Webhelp. Each topic matter content favorite, which I deleted manually. I then had to repair broken links.
  It takes nine minutes to open the first topic. Subsequently, a minimum of four minutes. My sistem is not responding once I have visit four or five subjects.
  
  I uninstalled and reinstalled RoboHTML. I started one archive earlier (30/06/06) where I had already imported a dozen subjects, and I have the same problems.
  
  Technical support (Adobe) had my database since Thursday morning, but I'm short on time! Any suggestions will be appreciated!

  
  My project is working this morning. Today was my turn - I 'fixed it' today, or I started.

  I moved the project to my hard drive. I brought all the file names. I looked for the unnecessary tags. I deleted the cpd and xpj files. Nothing has changed.

  Colum, I followed your advice. I have createed a new project and import my subjects. I tested the project after each 10 htm file imports and the project has worked every time. The last 10 files imported included the CSS and it failed. I created another new project and import only the .htm files and used the default css. It works!

  Thanks for all the help!
  Wendy

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• I want to slow down the pace. When I move the cursor at the end of the tween, to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not change to a double-headed arrow, as it should to.

  Hello.

  I want to slow down the pace in an animation frame-to-frame hand drawn at 24 frames per second. When I move the cursor at the end of the Tween (24 images), in order to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not a double arrow as it should, but changes to a black arrow with a small white rectangle with a border dotted, to the lower right of the cursor. Therefore, I can't extend the interpolations. Can anyone say about this?

  I am on the 20th day of a trial of Adobe Flash Professional CC, on an iMac osx 10.11.2 El Capitan. I use a Wacom pen.

  Thanks for any help. (I'm a complete newbie to the animation)

  Thanks for this very useful information and thanks to other members of the forum who also gave me great advice.

  I will experience more away, using the excellent information, I have now.

  Thank you all.

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• my mouse on my laptop does not respond correctly, going where ever he wantsa go and don't type wht words I will have a few seconds delay, can't play games or do much his frustratjing

  the mouse does not well, typing is slow and have to wait for the words to catch up, internet or disable, this has just begun, I can't select things very well, it takes time to play a game or write a letter

  Hi Kandikane,

  A. are you referring to the touch pad or external mouse?
  B. What is a USB or a wireless mouse?
  C. who is the manufacturer of your computer?
  D. recent changes made on your computer?

  You can try to update the drivers and let us know the result

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the driver, and then choose Update.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• The cursor does not show hour minute second

  Hello.

  I have the following

  PROCEDURE SP_GETHISTORICPAYMENT)

  IO_CURSOR ON T_CURSOR,

  O_CODTRANS OUT VARCHAR2,

  IS

  Tester varchar2 (2000);

  BEGIN

  Open the IO_CURSOR for

  Select tlt_date in the BF_MTP_TRA_LOGTRANSACTIONAL where rownum < 2;

  Select tlt_date in the BF_MTP_TRA_LOGTRANSACTIONAL Tester where rownum < 2;

  O_CODTRANS: = Tester;

  "The value of tlt_date is 13 May 15 15:27:32.

  The result of the execution of the stored procedure is:

  IO_CURSOR = 13 MAY 15 00:00:00 '

  O_CODTRANS = 13 May 15 15:27:32 '

  
  

  Why the cursor is not displayed the minute and the second time?

  
  

  I tried with

  Open the IO_CURSOR for

  Select TO_DATE (tlt_date, ' dd/mm/YY hh24:mi:ss') of BF_MTP_TRA_LOGTRANSACTIONAL where rownum < 2;

  But it does not work.

  How can I do to get the hour minute and second of a cursor in a procedure.

  Thank you.

  
  

  Do you like reading and thinking about the answers? Last attempt:

  PROCEDURE SP_GETHISTORICPAYMENT)

  IO_CURSOR ON T_CURSOR)

  IS

  BEGIN

  Open the IO_CURSOR for

  Select TO_CHAR (tlt_date, ' dd/mm/YY hh24:mi:ss') of BF_MTP_TRA_LOGTRANSACTIONAL where rownum< 2="">

  END SP_GETHISTORICPAYMENT;

  SY.

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• Lightroom does not start.  Error Msg: "the application does not start correctly: 0xc 000007b.

  I have tried everything I know how to do: run in compatibility mode, uninstall, update from 4.1 to 4.3, repair of chkdsk, ideas, searched the forum and online, many suggestions but nothing works.  I hope someone can help, I'm on a shooting trip and I'm dead in the water.  Photoshop and Bridge and everything work fine.  I was running Lightroom very well too, then one day I got the error and it has not opened since.

  
  Thank you

  A search of this forum for 0xc000007b would have easily found the answer.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• After update my iPad Pro with 9.3 iOS iPad crashes on safari. For example I googled something results appear, but I am not able to enter any page, because the iPod does not respond

  After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page

  It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.

• How can I restore Firefox 6 after updating to Firefox 7? Extension of the key does not work.

  I use Roboform constantly. I understand that my (7.x.x) version is not yet supported in Firefox 7, but somehow the update of Firefox was triggered in a moment of unconsciousness. Could not find a way to restore Firefox 6 until compatibility issues are resolved. Can I do it?

  http://www.RoboForm.com/support/news
  
  Install Roboform v7.5.7 for compatibility with Firefox 7.

• After update Xbox Elite anniversary update cortana does not respond correctly

  I recently updated my Xbox Elite One August/anniversary update and everything works great except for Cortana for some reason any that it says that my profile customization is limited. It works for the rest of my family. Does anyone have the same problem or difficulty. Thank you.

  Original title: Xbox 1

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• In the design does not respond after the installation of new

  I upgraded to Creative Suite 5.5 Design Studio, and all products except In Design work correctly.

  In ID, when I try to create a new document or a book, it freezes and I have to FORCE QUIT.

  I reinstalled the software twice.

  I have restarted my computer several times.

  I went through the process of trying to open a file or create a new file (document and book) or create a text of presentation model (plugin) about 30 times... at the end each time to the FORCE QUIT.

  Below the accident report data are transferred to pastebin.

  http://pastebin.com/1QbQKeL0

  http://pastebin.com/qBS1MaGh

  Thanks for any help!

  Removal of SING