Similar Questions

• Firefox not displaying does not changes to the Wordpress site

  I made changes to my style.css files for my wordpress sites. It seems that my changes do not appear on other computers. However on my MAC OS X, the changes do not appear on Firefox. I see the changes on Safari (on my MAC) I cleared cache, I reset Firefox, I have disabled DNS on my MAC and really have no idea where to go from here.
  My preference to use Firefox as my browser to work is to use Firebug.
  Please indicate what are my choices...
  I look forward to a solution to this.
  Concerning
  Karen Kirchmann

  Hi Karen,.

  Can you give us a link to your site (if it is not private or protected by a password) to see if we can see if it's reproducible for us.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • 

    > Options/Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • 

    > Options/Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• I have a desktop computer and a laptop. When I change a bookmark on one, it does not change on the other, even if I am connected to sync

  I have a desktop computer and a laptop.
  When I change a bookmark on one, it does not change the other even though I am connected to the sync.

  Sync is meant to do?

  Most probably one of the two computers has corrupted data which does not allow the sync complete.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Satellite Pro P300 - Fn + f5 combination does not change the monitor

  On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.

  If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)

  Thank you, best regards,.

  Davy

  Hello

  In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.

  In my opinion, you should clean the registry first.
  Use CCleaner. It s free and cleans up the registry.
  In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
  Finally, install the Toshiba drivers from the Toshiba page
  More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for...

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• Pack component 4.7 - Overview icon does not change

  Hello

  I use Eclipse.  Compilation with BB component pack 4.7.

  I have a master project (CLDC) and a second project (CDLC replacement Entry Point). The second project is checked system and startup.

  Note: the second entry point was to record a personalized for the app, not on the icon menu item.

  I right click on the "main" project-> properties-> Blackberry Project Properties-> resources.

  I select an icon file (1.png) in the dialog box "files of icons".

  I select a second (2.png) icon file in the "Icons of focus files" dialog box.

  I clean, compile, run under a 'new' "BOLD" Simulator (9000) and my app has the icon "no-focus".

  When I reversal, it does not change.

  What I've read, 4.7 is supposed to make this easy.  It seems to be advantageous, so I don't know I'm missing something that is obvious (to everyone except me).  I am new to Java and Eclipse, but really get the hang of it... so far, it's...

  Does anyone have any ideas why this might not work?

  Thank you!

  You project must have an entry point with parameter. This additional entry point must be defined as "Autostart". Add the parameter's main entry: gui

  And check the code below. This works.

  import net.rim.device.api.ui.UiApplication;import net.rim.device.api.ui.component.LabelField;import net.rim.device.api.ui.container.MainScreen;import net.rim.device.api.system.Bitmap;import net.rim.device.api.system.ApplicationManager;import net.rim.blackberry.api.homescreen.HomeScreen;
  
  public class HomeScreenIcon extends UiApplication{    public static void main(String[] args)    {        //Check for the argument defined in the project properties.        if (args != null && args.length > 0 && args[0].equals("gui"))        {           HomeScreenIcon theApp = new HomeScreenIcon(false);            theApp.enterEventDispatcher();        }        else        {            HomeScreenIcon theApp = new HomeScreenIcon(true);            theApp.enterEventDispatcher();        }    }    public HomeScreenIcon(boolean autoStart)    {        if (autoStart)        {        //The application started using the auto start entry point.        //Setup the rollover icons.        final Bitmap regIcon = Bitmap.getBitmapResource("1.png");        final Bitmap icon = Bitmap.getBitmapResource("2.png");
  
          invokeLater(new Runnable()        {            public void run()            {                ApplicationManager myApp =                  ApplicationManager.getApplicationManager();                boolean keepGoing = true;
  
                  while (keepGoing)                {                    //Check if the BlackBerry has completed its startup process.                    if (myApp.inStartup())                    {                        //The BlackBerry is still starting up, sleep for 1 second.                        try                        {                            Thread.sleep(1000);                        }                        catch (Exception ex)                        {                          //Couldn't sleep, handle exception.                        }                    }                    else                    {                        //The BlackBerry has finished its startup process.                        //Set the rollover icons.                        HomeScreen.updateIcon(regIcon, 0);                        HomeScreen.setRolloverIcon(icon, 0);                        keepGoing = false;                    }                 }                 //Exit the application.                 System.exit(0);            }        });
  
      }    else    {         //The application was started by the user.         //Start the application and display a GUI.         MainScreen ms = new MainScreen();         ms.setTitle(new LabelField("Hello there."));         pushScreen(ms);    }  }}
  

• Lightroom CC does not play video files.

  I have the latest update of LR CC running on an iMac to date with 16 GB of RAM.

  I have a well established with new and more installed videos catalog. Most are MOV files. When I have one, in the view of Wolf, select a preview image is displayed and the play button. When I click Play I get a pause button and no change in the preview image. No change in the position, or the seconds indicator played information.

  When I try to change to another video, the preview image does not change and remains with the original video.

  Any suggestions?  the treatment of the photo looks very good.

  ... Doug

  First of all, make sure you're on 2015.3 CC-"later" is ambiguous, since the Adobe update often suggests to those that they have the latest version.   Help > System Info to check.

  Second, add your vote and the details of your question about this in the Adobe official feedback forum: Lightoom 6.3: after update, I can't open any video file. Three product Adobe engineers are actively engaged in this topic and the best for you and Adobe if you continue the discussion here.

• Captioning does not change - 6 Captivate

  I help a member of my staff with a Captivate 6 project - we added audio for slides, typed in the legends, the timed it's all--but when we look at the slide, the captioning at the bottom of the screen does not change.

  Legend 1 extends time 00:00 to 00:33 dry.  Caption 2 extends from 00:33 00:56 dry. Legend 3 00:56 dry at 01:10 (end of slide)

  However, when we look at the slide, select the CC button - at the bottom of the screen that displays the first legend.  But when we arrive at the 33-second mark, the second legend does not appear.  The first legend stays on the screen for the duration of the slide.

  Fault lines is equal to 3.

  The first legend is 2 1/2 lines long - so we see the first fine legend.

  Any ideas on how to get the second caption to display on the screen?

  Thank you!

  -c-

  In addition, if you click boxes or buttons on this slide, the point of the break of these objects is paused captioning as well!  Even though the audio continues.  You need to move the points of the break of these interactive objects after the last series of captioning appears.

  Moreover, I think that it is a bug introduced in version 6.  I submitted a bug report to Adobe on this matter.  I think that captioning must be linked to the audio, not for the timeline objects.

• Cursor does not change with the selection tool

  If anyone has experienced this?  My cursor suddenly does not change with the selection tools when working on the photos.  Once I roll over the image, the arrow disappears and becomes a strange 3 little things, so cannot do any work with precision.  Still using 7 PS in Windows 7.  It wasn't a problem before.  Already uninstalled and reinstalled and the problem is still there.  I searched where this can be corrected.  So far, no luck.  Any suggestions?

  Three cursors display in Photoshop, Bridge, and Camera Raw (Windows 7)

• Old image does not change when replaced

  I have a form with an image that uses a relative file location URL.  When I open the resulting PDF form, the image appears without any problem.  Then I go out to the location of the file and replace the image with a new one.  The new picture has the exact name as the old image.  When I open the form the old image will appear in the form.  This happens even when I remove the old image of the server.

  I have not incorporated the image in the form I want to be able to change the image without having to re - open the form in the designer and reregister the outside.

  Can you please explain why the picture does not change even if I replaced with one that has the correct name and path as the original relative.

  See you soon,.

  Barry Graham

  Hello

  Have you set the relative relationship in the LC Designer?

  Once the form is rendered, it uses the link to display the image file in the ImageField object. Once the form is rendered the image data is stored in the PDF form and becomes part of the file.

  So there no need to return the server to get the data again.

  In addition, the image Embed in Designer checkbox can be confusing (he made me at least until John Brinkman put me straight). When you select embed, it means that the image data be available for other developers who open the form in the designer of the LC. When it is unchecked, the image data is already contained in the PDF file, when the user opens the form in Acrobat/Reader.

  See an example here: http://assure.ly/mcFrC6.

  Hope Steph,

  Niall

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• SwapImage using cursor does not change

  On my Web site www.albertson-design.com that I use, I use the behavior of swapImage to display a thumbnail to a larger size in another frame. The function works fine, but I'd like the cursor to change suddenly sharp arrow hand, as she normally does with a link. Currently, it does not change and gives no indication that by clicking on the images of sm does nothing.

  I know that there must be a way to do this, but have not been able to find. Can anyone help?

  Thank you

  Jon

  The suggested method for the CSS is not the right way to do it.  But to tell you the right way, we would have to see your code.

  If you do not get the pointer, which suggests that you have applied your behavior (Swap Image) directly to the tag, which is not the right way to do it.  Your behavior must always be applied to an anchor tag that wraps the .  You can change this by selecting the image in DW, using the selector of event on the Panel of behavior to the change onmouseover to onmouseover event.