Lightroom does not start, I can see the screen of boot, then Windows-say that it must close

Similar Questions

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Lightroom does not start.  Error Msg: "the application does not start correctly: 0xc 000007b.

  I have tried everything I know how to do: run in compatibility mode, uninstall, update from 4.1 to 4.3, repair of chkdsk, ideas, searched the forum and online, many suggestions but nothing works.  I hope someone can help, I'm on a shooting trip and I'm dead in the water.  Photoshop and Bridge and everything work fine.  I was running Lightroom very well too, then one day I got the error and it has not opened since.

  
  Thank you

  A search of this forum for 0xc000007b would have easily found the answer.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• Lightroom does not start. no error message. Task Manager indicates it gets up to about 75 k and disappears.

  My lightroom does not start. dies just before the banner.

  Please visit: http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/the-program-cant-start-because-msvcr110dll-is/f052d325-3af9-4ae5-990b-b080799724db

  Kind regards

  Mohit

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• I thought that if I want my machine to boot faster I can move the fonts of the lokal disk documents folder so it does not start them all at the start

  original title: Fonts folder

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

  Don't listen to anyone who has you said that.
   
  The best way to speed up your computer is to eliminate startup items which are unnecessarily run at startup.  Go to start | Search and type msconfig and then see what is running at startup and what other services are underway then as well.  You can eliminate selectively and then evaluate how fast your computer runs.
   
  Steve
   
   
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Metadata in the latest Lightroom does not.  I can not create metadata presets or synchronize the metadata.

  Metadata in the latest Lightroom does not.  I can not create metadata presets or synchronize the metadata.

  Any body else having this problem and a solution.

  Please follow the steps below

  > Launch Lightroom

  > Click Lightrooom > preferences > Presets tab

  > Please make sure that "With this catalogue store presets" are disabled.

  

  > Restart Lightroom and create a metadata preset

  > Create a new catalog and look for the question.

  Let me know if it helps.

  ~ UL

• My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  It is a catalog that you created on your computer, or coming from another computer?

  If it is one that has been created on your computer, you can search your computer to see if you have two different versions of Lightroom installed. If so, then you want to open the new version of Lightroom by double-clicking its icon, and then you should be able to open the catalog.

• problem with my 'in use Catalogue', lightroom does not start!

  Hello, I have a problem with my "Catalogue". My laptop battery was empty, he went, once restarted, lightroom does not start... He keeps giving the message that the catalog is already used... I tried to reinstall lightroom, select a new catalog, but these options don't work... Please help me because I can't work now!

  Hi liannem,

  What version of Lightroom?

  With Lr closed go to the location where your catalog (by default it is pictures/Lightroom)

  Remove the . Lock file with the same name as your catalog. For example, in the image below, it is Lightroom4 catalog.lrat.lock

  

  In your case, it will be Lightroomcatalog.lrcat.lock(Lightroom6/cc)

  Restart Lightroom

  Let us know if this helps

  ~ Assani

• 6 Lightroom does not start correctly

  LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.

  There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.

  The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?

  What should do? Help!

  Hi bjomb,

  You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.

  This would create a new catalog.

  check if it opens the new catalog, and it passes under the background processes in the Task Manager.

  If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.

  Kind regards

  Claes

• JDeveloper does not start after you move the folder

  Hello!

  I tested the 'new' version 12 c in my file downloads first. After that, I moved this directory to the place where I want to have it, but if I start JDeveloper, it does nothing. I can see the boot splash, but it crashes before the label change "Loading" to "register". The really strange thing is that I can start JDeveloper in the source location of downloads. I tried to delete the system folder and the folder of the application, but it has no effect.

  Does anyone have an idea how I can fix this problem? Luckily Google use a lot for me.

  Thank you very much!

  Greetz,

  Martin

  Operating system: Windows 7 64-bit

  Java/JDK Version: 7u45

  I'm a domain administrator and have full access to each location.

  Extra tip: the file system does not seem very well: it contains 3 files ('.diagnostics', 'dropin_support', 'system_cache') and a configuration file ('jdev-custom - logging.conf').

  % APPDATA%\Jdeveloper\.diagnostics\messages0.log:

  
  

  November 12, 2013 10:43:35 org.netbeans.modules.netbinox.JarBundleFile delegate

  WARNING: Error creating delegated to C:\dev\oracle\oracle_common\modules\oracle.javatools_12.1.2\javatools-nodeps.jar because reference:file:external/oracle.javatools-nodeps.jar

  November 12, 2013 10:43:35 org.openide.util.lookup.MetaInfServicesLookup$ P getInstance

  INFO: Cannot create class com.oracle.jdeveloper.nbwindowsystem.NbMainWindow

  java.lang.NoClassDefFoundError: oracle/ide/util/ArrayResourceBundle

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClass(ClassLoader.java:800)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.defineClass(DefaultClassLoader.java:188)

  at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.defineClassHoldingLock(ClasspathManager.java:632)

  at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.defineClass(ClasspathManager.java:607)

  at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findClassImpl(ClasspathManager.java:568)

  at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClassImpl(ClasspathManager.java:492)

  at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java:465)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoader.java:216)

  at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:395)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:464)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:421)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:412)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)

  at org.netbeans.modules.netbinox.NetbinoxLoader.loadClass(NetbinoxLoader.java:97)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:358)

  to oracle.ide.IdeMainWindow. < clinit > (IdeMainWindow.java:149)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:526)

  at java.lang.Class.newInstance(Class.java:374)

  at org.openide.util.lookup.implspi.SharedClassObjectBridge.newInstance(SharedClassObjectBridge.java:64)

  to org.openide.util.lookup.MetaInfServicesLookup$ P.getInstance (MetaInfServicesLookup.java:496)

  at org.openide.util.lookup.AbstractLookup.lookup(AbstractLookup.java:422)

  at org.openide.util.lookup.ProxyLookup.lookup(ProxyLookup.java:223)

  to oracle.ide.osgi.Activator$ 4.run(Activator.java:260)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:241)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)

  at $200 (EventQueue.java:103) java.awt.EventQueue.access

  in java.awt.EventQueue$ 3.run(EventQueue.java:694)

  in java.awt.EventQueue$ 3.run(EventQueue.java:692)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:76)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.lang.ClassNotFoundException: oracle.ide.util.ArrayResourceBundle

  at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:501)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:421)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:412)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)

  at org.netbeans.modules.netbinox.NetbinoxLoader.loadClass(NetbinoxLoader.java:97)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:358)

  ... more than 41

  November 12, 2013 10:43:35 oracle.ide.osgi.Activator start

  GRAVE: Impossible to boot IDE itself

  java.lang.IllegalStateException: problem creating IdeMainWindow on ETD

  at oracle.ide.osgi.Activator.setupWindow(Activator.java:281)

  at oracle.ide.osgi.Activator.start(Activator.java:118)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1177)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)

  at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)

  at org.netbeans.core.netigso.Netigso.start(Netigso.java:190)

  at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:198)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1189)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1011)

  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)

  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)

  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)

  at org.netbeans.core.startup.Main.start (Main.java:307)

  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)

  at java.lang.Thread.run(Thread.java:744)

  November 12, 2013 10:43:35 org.openide.filesystems.Ordering getOrder

  ATTENTION: Not all children in Menu / marked with the position attribute: [tools], but some are: [View, window]

  November 12, 2013 10:43:35 org.netbeans.modules.netbinox.JarBundleFile delegate

  WARNING: Error creating delegated to C:\dev\oracle\oracle_common\modules\oracle.bali.share_12.1.2\share.jar because reference:file:external/oracle.external.balishare.jar

  November 12, 2013 10:43:35 org.netbeans.core.startup.TopLogging$ AWTHandler uncaughtException

  GRAVE: null

  java.lang.NoClassDefFoundError: oracle/bali/share/collection/StringKey

  to oracle.bali.ewt.painter.JPaintContext. < clinit > (JPaintContext.java:461)

  at oracle.bali.ewt.border.BorderAdapter.getPaintContext(BorderAdapter.java:133)

  at oracle.bali.ewt.border.BorderAdapter.getBorderInsets(BorderAdapter.java:75)

  at javax.swing.border.CompoundBorder.getBorderInsets(CompoundBorder.java:139)

  at javax.swing.border.AbstractBorder.getBorderInsets(AbstractBorder.java:74)

  at javax.swing.JComponent.setBorder(JComponent.java:1796)

  at org.openide.awt.MenuBar.updateUI(MenuBar.java:190)

  to org.openide.awt.MenuBar$ 1.run(MenuBar.java:166)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:251)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)

  at $200 (EventQueue.java:103) java.awt.EventQueue.access

  in java.awt.EventQueue$ 3.run(EventQueue.java:694)

  in java.awt.EventQueue$ 3.run(EventQueue.java:692)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:76)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.lang.ClassNotFoundException: oracle.bali.share.collection.StringKey

  at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:501)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:421)

  at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:412)

  at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)

  at org.netbeans.modules.netbinox.NetbinoxLoader.loadClass(NetbinoxLoader.java:97)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:358)

  ... more than 22

  November 12, 2013 10:43:35 org.openide.util.RequestProcessor$ Processor doNotify

  SEVERE: Error in org.openide.loaders.FolderInstance$ 1R RequestProcessor

  java.lang.NoClassDefFoundError: has not been initialized class oracle.bali.ewt.painter.JPaintContext

  at oracle.bali.ewt.border.BorderAdapter.getPaintContext(BorderAdapter.java:133)

  at oracle.bali.ewt.border.BorderAdapter.getBorderInsets(BorderAdapter.java:75)

  at javax.swing.border.CompoundBorder.getBorderInsets(CompoundBorder.java:139)

  at javax.swing.border.AbstractBorder.getBorderInsets(AbstractBorder.java:74)

  at javax.swing.JComponent.setBorder(JComponent.java:1796)

  to org.openide.awt.ToolbarWithOverflow. < init > (ToolbarWithOverflow.java:139)

  to org.openide.awt.ToolbarWithOverflow. < init > (ToolbarWithOverflow.java:103)

  to org.openide.awt.ToolbarWithOverflow. < init > (ToolbarWithOverflow.java:90)

  to org.openide.awt.Toolbar. < init > (Toolbar.java:139)

  to org.openide.awt.ToolbarPool$ Folder.acceptFolder (ToolbarPool.java:482)

  at org.openide.loaders.FolderInstance.acceptDataObject(FolderInstance.java:442)

  at org.openide.loaders.FolderInstance.defaultProcessObjects(FolderInstance.java:795)

  to org.openide.loaders.FolderInstance.access$ 000 (FolderInstance.java:103)

  to org.openide.loaders.FolderInstance$ 1R.init(FolderInstance.java:693)

  to org.openide.loaders.FolderInstance$ 1R.run(FolderInstance.java:720)

  to org.openide.util.RequestProcessor$ Task.run (RequestProcessor.java:1432)

  to org.openide.util.RequestProcessor$ Processor.run (RequestProcessor.java:2044)

  November 12, 2013 10:43:35 org.netbeans.core.startup.TopLogging$ AWTHandler uncaughtException

  GRAVE: null

  java.lang.IllegalStateException: no record of the extension

  at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.java:476)

  at oracle.ide.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.java:183)

  to com.oracle.jdeveloper.nbwindowsystem.Installer$ 2.beforeLoad(Installer.java:52)

  at org.netbeans.core.windows.WindowManagerImpl.fireEvent(WindowManagerImpl.java:2028)

  at org.netbeans.core.windows.WindowSystemImpl.load(WindowSystemImpl.java:79)

  to org.netbeans.core.GuiRunLevel$ InitWinSys.run (GuiRunLevel.java:231)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:251)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)

  at $200 (EventQueue.java:103) java.awt.EventQueue.access

  in java.awt.EventQueue$ 3.run(EventQueue.java:694)

  in java.awt.EventQueue$ 3.run(EventQueue.java:692)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:76)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: javax.ide.spi.ProviderNotFoundException: failed to create the service class oracle.ideimpl.extension.ExtensionManagerImpl

  to javax.ide.spi.LookupProvider$ DefaultImpl.lookupAll (LookupProvider.java:228)

  to javax.ide.spi.LookupProvider$ DefaultImpl.lookupAllImpl (LookupProvider.java:171)

  at javax.ide.spi.LookupProvider.lookup(LookupProvider.java:122)

  at javax.ide.Service.findService(Service.java:40)

  at javax.ide.Service.getService(Service.java:63)

  at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.java:472)

  ... 19 more

  Caused by: java.lang.InstantiationException

  at sun.reflect.InstantiationExceptionConstructorAccessorImpl.newInstance(InstantiationExceptionConstructorAccessorImpl.java:48)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:526)

  at java.lang.Class.newInstance(Class.java:374)

  to javax.ide.spi.LookupProvider$ DefaultImpl.lookupAll (LookupProvider.java:224)

  ... 24 more

  Are you sure that you have loaded the correct setup package?

  jdevjava.zip is not an installation package for 12 c known to me.

  Windows setup are exe files and setup of linux are the bin files.

  Timo