Similar Questions

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.

• What are the causes of "secondary drive 0 and 1 not found.

  my pc says "secondary drive 0 and 1 not found. What could be the cause.

  Hello

  Method 1:

  You can check the primary and secondary transmission in disk management and check if they are healthy.

  (a) open computer management by clicking the Start button, click Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, under storage, click disk management.

  (c) in respect of each hard drive, check the status.

  Method 2:

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  Step 1:

  You can check in the BIOS Basic Input Output System () if the drive is detected correctly.

  Note:  Perform the step after you restart the computer.

  Step 2:

  If the drive is detected correctly during the restart in the BIOS, update the chipset and BIOS drivers. Visit the manufacturer's Web site to do the same.

• The following names are not found and cannot be added

  Hello

  I get this error "the following names are not found and cannot be added" when I tried to add newly created user for authorization of vCenter/group.

  I am using vCenter 4.1 with the guests of ESXi 4.1 & ESX4.1

  Time is synchronized with the ntp server in DC and vCenter & ESXi hosts.

  Any help to solve the problem?

  The problem caused by the AD domain and vcenter with the same sid, once change vcenter for a different sid, the problem has been resolved!

  How to change the SID on Windows 7 and Windows Server 2008 R2 using sysprep?

  http://www.Brajkovic.info/Windows-Server-2008/Windows-Server-2008-R2/how-to-change-SID-on-Windows-7-and-Windows-Server-2008-R2-using-Sysprep/

  You can download the PSGETSID

  Download tools named "PsGetSID" and make sure that your windows 2008 SID is not even. You can download it at the following ADDRESS:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897417

  Thank you best regards &,.

  BSR Krishna

• Automator action "CVS Update" could not be loaded because the file ' / usr/bin/cvs "is not found.

  Hello

  I just receive my MBA a few weeks ago to Apple and noticed my Razor mouse worked only with BluTooth but not when it is plugged into a usb port.  Other mouse usb and external drives readers work well.  Razor support told me the plug-and-play subsystem has screwed up, and errors have been associated with Automator.

  I have only a local account and I have not linked to the iCloud account.

  I don't want to reinstall my laptop because I have 300 GB of data on it, as well as some programs that I installed.

  I think that a package is not properly installed or missing, but my OSX knowledge is poor, because I have just started using a Mac!

  Sophies-MacBook Darwin kernel version - Air.local 15.2.0 Darwin 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64 x86_64

  Error are usually refers to a/usr/bin/cvs binary missing, and he's not here.

  # ls-l/usr/bin/cvs

  LS: / usr/bin/cvs: no such file or directory

  Some key messages,

  The "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  Someone would let me know how I could diagnose it and perhaps repair?

  Best regards, Sophie.

  System.log reported,

  [dec 19 10:33:59 - Sophies - MacBookAir loginwindow [99]:-[SFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] notified of changes of the list element with the identifier com.apple.LSSharedFileList.RecentApplications

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Add movie to iDVD Menu" action could not be loaded because the application 'iDVD' not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Add Photos to the Album' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Add' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Checkout" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Commit' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Find items from iPhoto" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Get iDVD slideshow Images' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Get Selected iPhoto Items" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Get iPhoto features' action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Import files in iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Launch of remote broadcasting' cannot be loaded because the application "QuickTime Broadcaster" was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD New Menu ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new sequence in the film ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new slideshow ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IPhoto New Album ' could not be loaded because the"iPhoto"application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "New QuickTime slideshow" action could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Play Slideshow iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Photos of the magazine' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Set Background Image iDVD' action cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set iDVD button face' cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set Annotations of film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the properties to read film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the movie URL' could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "See the iDVD Menu hand" could not be loaded because the application 'iDVD' was not found.

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: 8 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  dec 19 10:34:44 - Sophies - MacBookAir syslogd [48]: sender ASL statistics

  P.S Xcode is installed from the app store.

  and MacPorts is installed.

• WRT54GS2 v1 connection expired and server not found

  OK I got the connection expired issues and server not found on both my PC and my Laptop.I I use Zoom ADSL ISP x 5 provided. series 1605. I have a router Linksys WRT54GS2. I followed the installation program in full and was surfing without delay. The problem started there when I bought the router and plugged in about 5 months. I already spoke with technology specialists to my ISP and they said that I have an excellent DSL connection and they have not seen any problems at their end. I had disconnected the router completely my network and removed the Ethernet cable and hooked the cable directly to a DSL modem and had no problems until I plugged the router in the modem. I factory reset the router a few times and implemented accordingly to make sure everything was good. Well, I still have errors in time-out for laptops and PCs. I have tried almost everything in the book and I'm out of ideas. Am I missing something here? Any help would be greatly appreciated.

  I tried changing the settings through the router and nothing seems to work. I checked both PC and laptop computer for viruses and nothing. I talked to my ISP and they tell me that my DSL connection is excellent and which was not disconnects or connection has expired at their end. It is located between my router and two computers. An Ethernet cable is plugged directly from the computer to a DSL modem. And an Ethernet cable is connected directly to the rear of the router. I am just totally stumped. The internet is totally fine when I cut out the router completely. I have no disconnects when the main PC is connected to the DSL modem with router disconnected completely. I have reset the router completely and followed Linksys technical support online for the T and I still get the connection has expired. Initially, I got a Belkin wireless router and thus became the message timeout through it. I thought something was wrong with this one so I went out and bought a Linksys WRT54GS2 router Linksys Wireless G. can someone offer some advice or ideas that I have not already tried? Please? The wife and I are really frustrated.

• My paragraph styles have disappeared and are now appearing as the character styles

  Working on a new site because my old site muse become buggy...

  and now, my paragraph styles have disappeared and are now appearing as the character styles

  

  Thank you for sending the files. One of the files does not contain any character or paragraph Styles. In the other, I see the character styles named as paragraph styles. All indications from within the file are that they were created as character styles. The file format includes indications of the type of the style as well on everything that they are applied and in the list displayed in the palette. All of these styles are indicated by styles of characters in both places. The attributes that are in the styles are limited to what is allowed in a character style.

  In some places where the styles are applied, they are applied to the blocks of text or widget and replacements parts for paragraph-level attributes (i.e. h1 tag, space before and after, etc.). This leads me to suspect that they have can be created from blocks of text pointer tool selections (or other elements of text in widgets) and it was perhaps accidental that they have created using character Styles where paragraph Styles Panel rather than the Panel?

• Drop-down menus blink and are not accessible.

  Multi-site blink drop-down menus and are not accessible. Why? I tried to restart and will by default nothing helps. This will not occur in Internet Explorer.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will lose all personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Tried to delete the program, says file is damaged and can not remove.

  corrupted file.

  How can I delete a corrupted file. Tried to delete the program, says file is damaged and can not remove.

  Hello

  1. what kind of file is it?
  2 application/program related?

  If you know the location of the file, I recommend you start in safe mode and then remove the file and check. If you are able to delete the file, then start in normal mode and try to uninstall the program.
  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  I hope this helps.

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• When you send an Email to someone not in my contact list "Check names" appears and says not in the contacts list, and are not sent.

  original title: sending Emails

  When you send an Email to someone not in my contact list "Check names" appears and says not in the contacts list, and are not sent.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you use a POP3 Protocol account, please post on the forum network, e-mail and put online:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  If you use Hotmail, please report it to Windows Live Solution Center, son of Hotmail:
  http://www.windowslivehelp.com/forums.aspx?ProductID=1 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install.

  * Original title: Microsoft kb3134214

  The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.

  Hi Nathalie,.

  Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.

  I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:

  "I restarted my computer.

  "then stop it showed that he was trying to install the file again

  "I hit the reset button on my machine.

  "My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.

  "I chose boot normally.

  "Somewhere during the start-up, something installed or flashed a message

  "My system automatically restarted by itself.

  "On my screen, my computer displays a message saying it was set up my system.

  'My computer restarted again

  "Back to my login screen, I had a repeat of the previous message from my computer's configuration.

  "After that over, I arrived at my office

  "I've manually run Windows Update

  "After Windows Update, I checked the files available, disabled the original file in question and click the button install.

  "These files correctly installed and gave a message requesting to restart."

  "I rebooted my system manually.

  "Back in my office, I manually tried to install the file in question.

  "It gave me a message that it was already installed.

  How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.

  You can mark my question.

  Thanks for your help,

  Robert

• Hello... I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other

  I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Hello

  Answers can probably help if briefly you questions answers - Windows Forums for your
  version of Windows. Please provide all the information we need to help us help you.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows/Forum

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ====================================================================

  Call Service customer Microsoft direct-1-800-642-7676-heures 05:00 til time 9 PM PST (USA).

  Contact Microsoft Customer Service
  http://support.Microsoft.com/kb/295539

  Microsoft support - contact us
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft - email us
  http://support.Microsoft.com/contactus/cu_sc_selector_email?ws=support%2csupport

  Options chat or telephone of the solution - top-right - Windows 7 Center
  http://support.Microsoft.com/ph/14019#TAB0

  Microsoft - product selection solutions centers
  http://support.Microsoft.com/select/?target=hub

  Solutions Microsoft Fixit Center
  http://support.Microsoft.com/FixIt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">