Lightroom identity plate

Similar Questions

• What is specification of size of file for a graphical identity plate 5.5?

  Seems to have got smaller?  My old plate is cut

  See my post on this topic: 5.4 Lightroom identity plate space

• Identity plate problems

  After you install the new Sierra of OS, I have problems with the identity plate. The text prints correctly, as it is displayed. It prints extended and partially. This happens with the CC with Lightroom version and also with the 5 Lightroom. Someone at - it the same problem?

  I just updated to Sierra 10.12.1 and downloaded new disks of Canon. Well, it seems that the identity plate number is current. I don't know if it's ok for the brand of printer, but at least with Canon works now.

• Mobile identity plate

  I can't move the identity plate to the location on the draw where it should be. I use Lightroom 5.7 and worked right up until a week ago. When you click on the print window identity plate signature appears in the center of the image but without the border and it is not mobile. No idea how I can reset the identity plate move feature? Thanks for the pointers.

  Hi patriciad,

  There is an option under the identity plate called "make on each image", please uncheck that option and then try.

  Kind regards

  Mohit

• I have an event soon wishing prints 4 x 6 given to participants who has a logo provided in one corner and my title generated through the lower part of the rest of the impression. I was able to save the logo and title separately in the identity plate, but

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event? I'm not WiFi devices yet so I intend import to Lightroom from the SD through my Macbook card and then wired to an Epson photo printer. Test prints I have the air out well with the box logo or title across the lower part, but I really need both on prints for my client. Thank you.

  alanh9307519 wrote:

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event?

  Why not use watermark custom logo and him custom identity plate for the title in the LR print module? You also have the option to add the title at the bottom of the image using 'Photo Info' selection "Custom Text". After installation, you can save this as a new model. Unless I'm missing something, it should do the job.

  Instructions for both here in two separate videos: identity plate "Julieanne Kost's Blog of »

  Here is an example with three used:

  

• The identity plate editor problem

  Greetings,

  I'm trying to customize the "identity plate" in Lightroom 6 CC.  When you try to install the "style text identity plate" or the "graphical identity plate" the free "Melt" domain for free buttons I cannot change the font size.

  Regardless of the type of size I choose that it is up to 70, with result the 'import', 'Developing', etc. areas poorly displayed.

  "Below one can see that the font size is set to"11", and yet the"library,"develop", buttons etc. are too large.

  

  After a click on the 'OK' button and the 'identity plate Editor"re-opened the font size has been reset to '70.

  

  I need comments to work around or fix this problem.

  Thank you in advance.

  Rory

  It works well here.  You probably need to reset your preferences file.

  

• LR 5.4 identity plate

  I just installed the new version 5.4 LR, but I can't change the identity plate.

  It is not a major problem, but it annoyes me because it's always the first thing I do...

  Someone knows what to do?

  

  You can not change the identity plate "Lightroom", you must use the drop-down list to choose "custom".

  

• Cannot use transparent tiff as identity plate.

  I just installed Lightroom 2.3 and I would like to place a logo on all my images. This logo has a transparent background. However, when I load the tiff file in the identity plate, it comes with a white background. The size of the image is 57 pixels wide and 51 pixels high. The resolution is 200 pixels/inch.

  The identity plate instructions say I can drag or paste the image into the box, but I have not been successful in doing so either.

  Help, please.

  I don't remember if transparent TIFF is supported. Have you tried to convert it to a PNG file? I think that trasnparency is supported for png.

• Cannot change the information in the identity plate

  Let me see if I can explain it so it makes sense.  I working on a slide show and you want to put something on a first page in the show.  I add the title I want to use my identity plate but when I try to bring some old information comes and I can not remove it.  The text he is trying to use does not appear on the drop-down window or it appears on the Board to the top of the page for the identity plate.  I can't get rid of this information, and he wants to use the new item that I added instead.  It will allow me to use my copyright and the title of my main but, for some reason any, when I try to use the new title, he evokes this former title, which is actually a combination of two older, but they are not anywhere (that I can find) to be able to remove it.   UGG!

  You need to highlight current information in the box? A Ctrl / Cmd to select all type, then enter your information in the box, you should see change at the top. Register so that you can again if you change.

• identity plate is missing

  don't see identity plate in the press

  stlkrush wrote:

  I wanted to say that I don't have a dog tag in print mode

  You may have accidentally placed the identity outside of the cell plate. Try to change the scale to 100% and see if it reappears.

  

• Cannot add an identity plate in the web

  Hello

  I can add an identity plate in the print section, but is not in the web section. Is this just a button that I'm missing?

  Thanks for the screenshot sharing.

  You have the style of provision as the Gallery of the grid and for this reason, that identity plate is not present in the Site Info Panel, which is the expected behavior.

  Identity plate option is only available for the provision of Gallery Classic style.

• where can I configure the default identity plate Info?

  Whenever I have create a new catalog the identity plate becomes a name. How can I change the name so that when I create a new catalog he retains the name rather than by default the original name?

  I understand that identity plate info, such as logos is not new catalogues. How can I change the name of watch?

  It is a real pain in the anus.

  Hi PvanE,

  There is no option to put the identity plate globally for all catalogs.

  You need to repeat the steps to set the identity plate whenever you create a new catalog.

• Make an issue of stylized text identity plate

  When you do it for a pdf or a slide show, the text I type is 1/2 way point to the bottom of the little white box. Cannot find out how to get a new line of text. I hit enter and just the window closes.  So I have to make a long line, and even then it starts to disappear from view at the bottom of the window. Thank you!

  To get a new line, you must hold down the Alt/Option key when your [[ant the return key.

  Note, above defintely works on Mac platform, but some users have reported that it does not work under Windows.

• Overlays with JUST lightroom

  Hi, I downloaded the latest version of lightroom 6 and have a bunch of models, maps and overlays. Is there anyway that I can use these WITHOUT using photoshop? I can't afford photoshop right now and use maps, models and overlays.

  Thank you!

  If Photo overlays are PNG files with transparency that you can use Lightrooms "Identity plate" or "Graphical watermark" to print or print to a file with these overlays.   I used the plate of identity as superimposition several times and it works well on a limited basis but Photoshop/elements would be the best solution if you do many here see how to proceed.

  How to add Christmas overlays in Lightroom - Lightroom Presets

• Stop asking to connect to Mobile with Lightroom

  All of a sudden Lightroom back asking to connect to mobile. I DON'T WANT THAT. Why is he still here? How to kill this forever and ever?

  I know this has been asked several times. Why isn't this resolved?

  Hi ErikVerheggen,

  What version of Lightroom do you use?

  • Simply to Pause the synchronization in mobile Lightroom identity plate.
  • Right-click on the identity plate, and then select 'Lightroom'.

  

  • Reboot once done in Lightroom.

  Kind regards

  Assani