Cannot use transparent tiff as identity plate.

Similar Questions

• Cannot change the information in the identity plate

  Let me see if I can explain it so it makes sense.  I working on a slide show and you want to put something on a first page in the show.  I add the title I want to use my identity plate but when I try to bring some old information comes and I can not remove it.  The text he is trying to use does not appear on the drop-down window or it appears on the Board to the top of the page for the identity plate.  I can't get rid of this information, and he wants to use the new item that I added instead.  It will allow me to use my copyright and the title of my main but, for some reason any, when I try to use the new title, he evokes this former title, which is actually a combination of two older, but they are not anywhere (that I can find) to be able to remove it.   UGG!

  You need to highlight current information in the box? A Ctrl / Cmd to select all type, then enter your information in the box, you should see change at the top. Register so that you can again if you change.

• Cannot add an identity plate in the web

  Hello

  I can add an identity plate in the print section, but is not in the web section. Is this just a button that I'm missing?

  Thanks for the screenshot sharing.

  You have the style of provision as the Gallery of the grid and for this reason, that identity plate is not present in the Site Info Panel, which is the expected behavior.

  Identity plate option is only available for the provision of Gallery Classic style.

• Cannot use or restore Vista after SP1 uninstall

  original title: cannot use or restore after uninstalling SP1 Vista - please help.

  In order to perform an upgrade of Vista installation to repair the damage caused by a virus recently, I uninstalled Service Pack 1 (because installation upgrade will not work with SP1). I know there are other things I should have done (a sfc/scannow in theCommandPrompt) or SP1 slipstreamed DVD, but I did not know them at the time, nor did I think there will be problems as a result of an uninstallation of SP1. As the title suggests, I got kind of wrong.

  It all started after uninstallation, which seemed successful. I rebooted, and instead to get Vista without SP1, I get an error code of the variety of the command prompt (just the black screen with white writing). This continues for a couple of times, and after a few remedies attempts that fail miserably, I decide to systemrestore(using the Vista CD, of course) at a point before uninstalling SP1. I think it will work, but the first time, as it gets to the "development of restoration" and how he hung for three hours before, I decided to turn off the computer because he was of course not moveable anywhere. I restart and let the boot from HARD drive upwards to see if maybe something worked, and I get to the login screen of Vista, how I notice none of my devices work. The mouse or the keyboard responds (both are USB) and the attempts with the PS/2 versions don't either. I thought maybe it was a driver problem, so I reinstalled the driver chipset at the disk using my laptop (took thedesktopHARD drive, put in a box outside, then executed the installer of the chipset on my laptop and said to install outside driver), but it could not solve the problem. I also tried other restorations, but invariably they fail after a certain point, which gives me an error message:

  "System restore failed due to an unspecified error. The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction. (0x80071AA7).

  I googled errormessageand see that most people encounter it while trying to install a service pack, I thought it was a problem with restoring Vista without SP1 to Vista SP1. Thusly, I used the command from theVistaCD command-line option to read my Windows Update log and got the following:

  "2010-07-09 04:44:32:593 664 29 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =".
  2010-07-09 04:44:32:593 664 29 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 04:44:32:593 664 29 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 04:44:32:593 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:34:605 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:36:617 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 15:26:30:160 216 12 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 15:26:30:160 216 12 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 15:26:30:160 216 12 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 15:26:30:160 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:32:172 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:34:185 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 16:04:19:912 356 Misc 3 b 0 = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:04:19:912 b 356 3-0 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:04:19:912 b 356 3-0 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:18:08:745 532 248 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:18:08:745 532 248 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:18:08:745 532 248 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 Misc = logging initialized (build: 7.4.7600.226, tz:-0800) =.
  2010-07-09 16:25:53:894 976 244 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:25:53:894 976 244 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:25:53:894 976 244 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 COMAPI WARNING: failed to connect to the service. (HR = 80080005) »

  I can't interpret it, although it seems to confirm my suspicions the transition from other than the SP1 and SP1 is causing issues. If someone else could interpret this?

  Basically I have a non-functional operating system, I can not restore it to a State of operation, nor access the input devices because it does not work on the login screen. Anyone all proposed solutions to the problem, short of a clean install of Vista? I don't want to reformat unless absolutely necessary.

  This is the forum Vista install.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  You can try the repair Forum.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Mobile identity plate

  I can't move the identity plate to the location on the draw where it should be. I use Lightroom 5.7 and worked right up until a week ago. When you click on the print window identity plate signature appears in the center of the image but without the border and it is not mobile. No idea how I can reset the identity plate move feature? Thanks for the pointers.

  Hi patriciad,

  There is an option under the identity plate called "make on each image", please uncheck that option and then try.

  Kind regards

  Mohit

• I have an event soon wishing prints 4 x 6 given to participants who has a logo provided in one corner and my title generated through the lower part of the rest of the impression. I was able to save the logo and title separately in the identity plate, but

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event? I'm not WiFi devices yet so I intend import to Lightroom from the SD through my Macbook card and then wired to an Epson photo printer. Test prints I have the air out well with the box logo or title across the lower part, but I really need both on prints for my client. Thank you.

  alanh9307519 wrote:

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event?

  Why not use watermark custom logo and him custom identity plate for the title in the LR print module? You also have the option to add the title at the bottom of the image using 'Photo Info' selection "Custom Text". After installation, you can save this as a new model. Unless I'm missing something, it should do the job.

  Instructions for both here in two separate videos: identity plate "Julieanne Kost's Blog of »

  Here is an example with three used:

  

• The identity plate editor problem

  Greetings,

  I'm trying to customize the "identity plate" in Lightroom 6 CC.  When you try to install the "style text identity plate" or the "graphical identity plate" the free "Melt" domain for free buttons I cannot change the font size.

  Regardless of the type of size I choose that it is up to 70, with result the 'import', 'Developing', etc. areas poorly displayed.

  "Below one can see that the font size is set to"11", and yet the"library,"develop", buttons etc. are too large.

  

  After a click on the 'OK' button and the 'identity plate Editor"re-opened the font size has been reset to '70.

  

  I need comments to work around or fix this problem.

  Thank you in advance.

  Rory

  It works well here.  You probably need to reset your preferences file.

  

• Lightroom identity plate

  I have reduced an identity plate text box to zero in error and cannot get it back.

  Menu - Lightroom > identity plate Setup... returns "number Lightroom identity plate Option.

  My name does not now appear in the Page / Panel plate identity.

  Am a new user.  Would appreciate any help.  Thank you.

  In the drop-down list, click "custom."

  

• LR 5.4 identity plate

  I just installed the new version 5.4 LR, but I can't change the identity plate.

  It is not a major problem, but it annoyes me because it's always the first thing I do...

  Someone knows what to do?

  

  You can not change the identity plate "Lightroom", you must use the drop-down list to choose "custom".

  

• cannot use three finger view Preview

  cannot use three finger check to open in the preview pdf

  If you mean that you can't have three fingers tap the trackpad for Quick Look, a file, I got that too. One of the best features of Mac OS x, so I hope they fix very soon!

• Cannot use cards MBNA Web page Services: no account login button appears.

  Cannot use cards MBNA Online Services because no connection of the personal account button appears on the original Web page. However, I can access my MBNA card account using their site of Bank of America. Also cannot reserve National coach Express tickets because no key prosecution appears after have entered my details to the passenger. However, the same site operates using SAFARI. I have FIREFOX 15.0.1.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version?

  I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version? My os is 10.4.11

  You can read this article: Firefox no longer works with Mac OS X 10.4 or PowerPC processors to read about the EOL for Mac 10.4 support and what the best options going forward.

• Dislikes 8.0! Cannot use my 'screen capture' as I LOVE REALLY! How to return to an earlier version?

  Dislikes 8.0! Cannot use my 'screen capture' as I LOVE REALLY! How to return to an earlier version?

  I am having trouble finding a way to return a single step (version - or more) to get the add-on called "Screen Grab" (with a right click) working again!

  FireFox 8.0 we 'OK' but I don't really miss being able to use the screen saver! Honestly, I miss it a lot more than I like the new version of FF.

  Please understand I HAVE ALWAYS LOVE FIREFOX!

  Thank you all for your comments! Really very happy to be "more operational"! The new version of Screen Grab works great with Firefox 8 now!

  Hey John!
  We made a compatible version based on the latest version of screengrab (0.96.3).
  You can enter here.

• Still cannot use e-mail on my iPhone 5s

  Still cannot use e-mail on my iPhone 5s since the 9.3.1 update.

  What happens exactly? We need more information to help you.

• Tecra A10 - 13I (PTSB0E-01400XFR): cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 13I with windows server 2008 R2, I am upgrading from 4 GB to 8 GB.

  My BIOS detect 8 GB, see Windows my 8GB (2 x 4 GB) of RAM, but I can see in "8.00 GB (3.87 GB usable)" system properties When I run the application you "Resource monitor", I see 4233 reserved material MB. Finally, if I use a VM with 4 GB of RAM, the virtual machine cannot use this reserved memory and crashes.

  I have read this thread: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0]
  I tried to update my BIOS and changed Advanced Startup Option "Maximum memory", but no change to my memory.

  Thank you
  Jonathan

  PS: Sorry for my poor English :)

  Hi mate

  TECRA A10 - 13I is certainly capable of that means you can use 2 x 4 GB RAM RAM 8 GB.

  What is the report DirectX?
  Check the value of memory here. In order to access the DirectX, you must use the command * dxdiag *.

  Greetings