Limit bandwidth consumption on a monthly

Similar Questions

• SX20 bandwidth consumption

  Hello

  I want to know the bandwidth consumption when I use it with three other SX10 SX20 Multisite on MPLS (rate set to 512).

  Consumption of bandwidth for SX20 is regardless of the total rate of calls for each endpoint that is connected to the Multisite Conference, while each SX10 will consume only what he call rate is fixed.

• limit bandwidth telepresence Tandberg ex90

  Hello

  I have 5 ex90s.

  Location1 (L1): 2

  Location2 (L2): 1

  Location3 (L3): 1

  Location4 (L4): 1

  When ex90 in place call each other, then they can use all the bandwidth as they wish.

  When a place ex90 calls ex90 in another place, they can use only 1.5 M b & w.

  How to implement?

  Help, please!

  Hello!

  I wouldn't be that concerned by the individual links and tips. They will be automatically created for you when you make the subzones. You can get what you want in your simple deployment with just the configuration of the subzone. The unlimited bandwidth in a subarea and limit calls out of it to all the other subfields or areas.

  1: create 4 sub-zones on your VCS.

  VCS configuration > Local area > subzones.

  2: for each sub-area, create a membership rule.

  I guess that the TYPE can be subnet. So as a membership rule, add the subnet for the site corresponding to this subarea.

  VCS configuration > Local area > subzone of the membership rules.

  Subnet address and prefix length

  These two fields determine the range set

  of IP addresses that belong to this subarea.

  (Applies only if the Type is subnet.)

  Address field shows the range of

  Addresses IP to assign to this subarea

  based on the combination of the subnet

  address and prefix length.

  If you have a network at the site THAT has a network 10.1.1.0 as a C-net IP address, membership rule should be:

  Subnet address: 10.1.1.0

  Prefix length 24

  If you have a network to the TWO site that has an address of IP 10.1.2.0 as a C-net network, membership rule should be:

  Subnet address: 10.1.2.0

  Prefix length 24

  and so on...

  3: set up the limits of subzones for your four subzones

  

  As you can see, there is no need to set up the individual links and pipes, unless you want to do more advanced boundaries between your locations.

  Robert

• How can I limit bandwidth used by a program on my internal network?

  I am running windows 7 64 bit edition Home premium

  I have a live duo network storage peripheral Western Digital mybook.

  Sometimes I access multiple programs simultaneously.

  I want to know how to limit speed programs access to bandwidth for one or more programs at once through my intranet.

  It would help me greatly.

  Kind regards

  uhdunno

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Limit bandwidth for VPN users

  Hi guys,.

  I use ASA Version 8.2 (1), I want to limit vpn users to use less bandwidth of my Interlink to access something on the inside of the network

  example: source vpn pool

  Destn: inside the network

  Please let me know how to achieve this with QOS config.

  Hello

  Probably the best would be to match groups of tunnel.

  class-map TG1-best-effort 

  match tunnel-group Tunnel-Group-1 

  match flow ip destination-address 

  Then this traffic in police policy-map and apply the service policy to the external interface (since you want to traffic police from your home). You can also use the pool for vpn access lists.

  For more details, please see:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/QoS.html

• Bandwidth consumption mobile App

  Does anyone have an idea how much bandwidth consumes a meeting? Obviously, it will depend on the shared media, but I was wondering if someone could give me a ballpark figure. We have our classes with PPT presentations and audio but not video.

  Thank you.

  Sorry, I got the link wrong. Here's one that should work.

  http://realeyesconnect.adobeconnect.com/p77id282p75/

• E2000 how to limit bandwidth

  For the moment this E2000 is connected to another router. The DHCP service is disabled and a LAN cable is in port 1.

  I can connect the E2000 wifi a give me access to the internet.

  I want the following, but I'm not able to do.

  I want to give free internet access with the E2000 but want to restrict all computers so that they don't your speeds to 200 kb/s

  I even if I had to use QoS and implemented by the following:

  WMM support: enabled
  No ACK: enabled

  Manual 200 Kbps
  High priority
  port 0-65535

  STIL, I get speeds higher than 200 Kbps.

  Hope you can help me.

  He has worked with DD - wrt. I just did some tests of speed and perfect air. TNX a lot

• Can I limit the bandwidth of comments for the R7000 Netgear network?

  Hello dear community,

  is there a way to limit bandwidth (not for games) for the network of comments?

  Or you can limit the bandwidth with this router for specific mac addresses?

  Is it possible to display consumption of direct download (real time) for a specific device, which is connected to the R7000?

  Thanks in advance.

  Same questions answered in this thread, monitor the use of data by the device X 6 R8000.

• FF resolution settings to lower the consumption of bandwidth

  What versions of FF will do and what the specific settings are there for lower bandwidth consumption?

  In addition, the FF settings will be override settings on sites like youtube? For example, if my children were to click on a higher resolution or HD video settings for their videos on youtube, what would happen?

  Changing the resolution has no effect on the performance of Firefox, and can even be worse if you operate an LDC monitor not in its native resolution.

  You can block content if you ant to improve performance of a connection to low broadband bandwidth.

  You can watch Adblock Plus.

  • Adblock more: https://addons.mozilla.org/firefox/addon/adblock-plus/

  You must subscribe to a list of filters (for example the EasyList).

  • http://adblockplus.org/en/subscriptions
  • http://adblockplus.org/en/Getting_started

• How to limit the bandwidth for each different devices connected to my router

  Hello

  Thanks in advance!

  Can you help me to limit bandwidth on perticular devices, I use NETGEAR (WNR1000v2 - N150 wireless router) and the version of the firmware of the V1.1.2.58, like almost 4 devices are connected to this router, I want to limit the speed of bandwidth to each device.

  I have not found the Qos in my Netgear.

  It might help if you provided in details with screenshots.

  Thank you

  Samira

  Not possible with this model of router

• Bandwidth limit for MAC addresses

  Is there a a way to limit bandwidth, based on the MAC address?  I would like to limit certain MAC addresses or a group (invited) to about 10% of my available bandwidth.

  Thank you!

  It can be done by combining the IP - MAC liaison and control frequency by IP address.

• Limit my bandwidth downloading the applications using the API to control traffic and QoS

  I used QoS and Traffic Control API as TcAddFlow and TcAddFilter to control my bandwidth usage download applications.

  We manipulate TC_GEN_FLOW, to send and receive FLOWSPEC parameters.

  Now, I want to set the exact limit to 5 Mbps, what are the value that I need to set for TokenBucketSize and TokenRate to limit bandwidth to 5 Mbps FLOWSPEC structure?

  Code snippet:

  newFlow-> ReceivingFlowspec.DelayVariation = QOS_NOT_SPECIFIED;
  newFlow-> ReceivingFlowspec.Latency = QOS_NOT_SPECIFIED;
  newFlow-> ReceivingFlowspec.MaxSduSize = QOS_NOT_SPECIFIED;
  newFlow-> ReceivingFlowspec.MinimumPolicedSize = QOS_NOT_SPECIFIED;
  newFlow-> ReceivingFlowspec.PeakBandwidth = POSITIVE_INFINITY_RATE;
  newFlow-> ReceivingFlowspec.ServiceType = SERVICETYPE_NETWORK_CONTROL;
  newFlow-> ReceivingFlowspec.TokenBucketSize = ?;
  newFlow-> ReceivingFlowspec.TokenRate =?;

  newFlow-> SendingFlowspec.DelayVariation = QOS_NOT_SPECIFIED;
  newFlow-> SendingFlowspec.Latency = QOS_NOT_SPECIFIED;
  newFlow-> SendingFlowspec.MaxSduSize = QOS_NOT_SPECIFIED;
  newFlow-> SendingFlowspec.MinimumPolicedSize = QOS_NOT_SPECIFIED;
  newFlow-> SendingFlowspec.PeakBandwidth = POSITIVE_INFINITY_RATE;
  newFlow-> SendingFlowspec.ServiceType = SERVICETYPE_NETWORK_CONTROL;
  newFlow-> SendingFlowspec.TokenBucketSize =?;
  newFlow-> SendingFlowspec.TokenRate =?;

  Thank you & best regards

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Limit the bandwidth in the tunnel VPN on Cisco ASA

  Hello

  I have a site VPN tunnel to create with the local desktop client. I fear that the traffic in the tunnel in impacting the Internet bandwidth for the entire office. Is it possible to limit bandwidth on the speed VPN tunnel. I have attached a configuration that shows the configuration of the ASA at the local office.

  Any help would be much appreciate. I watched QoS mapping but it's hard to make sense.

  Thank you very much

  Kind regards

  Michael.

  The ASA supported QoS features are:
  Police, LLQ and Traffic Shaping

  To avoid the individual flows hogging the bandwidth of the network, you can limit the maximum bandwidth used by flow (with the police)
  The police is a way of ensuring that no traffic exceeds the rate (in bits per second) that you configure,
  so make that person not traffic or the class can return to any of the resource.
  When traffic is higher than the maximum rate, the ASA removes the excess traffic. Policy defines also the largest single burst of allowed traffic.

  Example of font options:
  class policing_map_name hostname(config-pmap) #.
  Police hostname(config-pmap-c) # {exit | entry} to compliance rates [conform burst]
  [action in line [drop | send]] [action exceed [drop | send]]

  That is to say

  HostName (config) # class - police-class card
  HostName(config-CMAP) # match any
  HostName(config-CMAP) # QoS_policy policy-map
  class police_class hostname(config-pmap) #.
  HostName(config-pmap-c) # exit police 56000 10500

  The configuration depends on the "this" base that you want to limit the connection.

  Federico.

• Windows file sharing - a lot of bandwidth is consumed on ports 137, 138, 445 domain windows server 2008

  Hello

  I have observed this for a few months now on my windows Server 2008 domain (all my clients are windows 7) and it drives me crazy.  My wireless nodes #1 bandwidth consumption is taken by 'Windows file shaing' on ports 137, 138, and 445.  I tried to pull the bandwidth on these ports on all of my users wireless using the wireless controller, then the claim of the user than even a small file as 100 MB ' would take hours to download.  If windows 7 OS is too talkative, I prefer to go back to windows XP?

  What is the solution of my problem, I need to have my users to upload files and at the same time be fair with my bandwidth that does all my work of nodes and servers without really hard wire.  Help please.

  "Note: someday open a session:"windows file sharing"takes about 10 GB of bandwidth ' and sometimes 5 GB"

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Bandwidth configuration Expressway

  Hello

  Can someone let me know to change the bandwidth on Hwy C and E server configuration.

  This will affect the quality of B2B video calling and Conference I endpoints MX800, DX 80, EX80 and C60.

  I also have the TMS, is it also requires change bandwidth on MSDS.

  The conductor, I configured HD for the teleconference scheduled.

  Bandwidth restrictions: the speed of maximum Session for video calls on the default region on Cisco Unified Communications Manager is 384 kbit/s by default. The bandwidth by default call on Highway-C is also 384 kbit/s by default. These settings may be too low to provide the quality expected video for the DX series.

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/Admin _...

  Kind regards

  RACLOT

  Hi r.,.

  Cucm point of view, it is a function of the parameters of the region. As explained with examples in the SRND

  When a video call is established between two video end points, audio and video streams are established and the bandwidth is deducted for the negotiated rate. Unified CM uses regions to determine the maximum bit rate for the call. For example, with a Cisco TelePresence EX90 system to higher detail of 1080 p at 30 frames per second (fps), the rate negotiated between regions would have set at 6.5 Mbps. EX90s used in this scenario would be on average about 6.1 MB/s for the session. When endpoints start the presentation during the sharing session, BFCP is negotiated between the two ends and a video stream is activated at 5 fps or 30 fps, depending on the endpoint configuration. In this case, endpoints are butterfly to the bottom of their main video stream to include the video presentation so that the entire session use more than the allocated 6.5 Mbps throughput. Thus, the average bandwidth consumption remains the same with or without presentation sharing.

  Immersive Telepresence and desktop settings such as the Cisco TelePresence system 500, 1000, 3000, and TX9000 Series, who are negotiating a call between them work a little differently in the sense that the video of presentation of sharing is additional bandwidth beyond what is allocated for the main video session, and so it is not deducted from the Enhanced location CAC.

  More details are given here

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/srnd/collab09/CL...

  In addition, as stated in the previous post "bandwidth restrictions put in place by the call control infrastructure will be replace this parameter.", it means that for the endpoints registered with cucm cucm parameter will prevail.

  Manish