Bandwidth configuration Expressway

Similar Questions

• How to make or VCS Expressway TURN illustrated works?

  Hi, Experts.

  My VCS Expressway equipped Tower, and I found for TOWER configuration is pretty simple, it allow just under VCS Configuration > Expressway > turn ON, but no matter, I tried, licenses of relay TOWER always indicated '0' in the 'current' line under the VCS Expressway dashboard.

  I took my test in this way, two Jabber client video (v4.5, MAC edition) reside in a different network behind NAT (no firewall), they call each other and regardless I turn on or turn off the TOWER, still good video quality services mine. (VCS Highway away from the two movi), I assumed that in both cases, the media traffic send directly between the two Movi, rather than climb up to the VCS Highway and then return, normally called us "Hairpin" traffic.

  The result is not I have enabled or disabled the service of the TOWER, it always not-pinned hair, and still no license relay TOWER was used.

  What happens here? something wrong? I'm quite confused.

  You have to turn on the feature of ice on the Jabber video model?

  

  On the model of commissioning, you must configure the address of TurnServer, TurnAuthUsername and TurnAuthPassword.

  You must also configure the authentication domain in VCS - E who use to run the server (you must set the match name and user password with TurnAuthUsername and TurnAuthPassword set up on the model of commissioning).

• Conference TMS uses the wrong bandwidth with BBFRR

  Hi all

  I m currently faced with the following question:

  When booking a conference through TMS directly or through Outlook (with TMSXE) the bandwidth Conference when using BBFRR will be set to 1152 kbps regardless of the configured default 4096 Kbps or immersive IP broadband bandwidth in the World Conference of TMS. During a call directly to the conference expected the default bandwidth configured on the endpoint will be used. This brings me to the presumption that it has something to do with the maximum setting of IP bandwidth on each endpoint in TMS (see screenshot). You cannot change this setting because endpoint is saved to CUCM.

  TMS conference settings:

  tms_conference_setting.PNG

  

  Endpoint settings:

  tms_ip_bandwidth.PNG

  

  I have no idea where this parameter, and I hope that someone here in the field can help me fixing this problem.

  It's my current setup:

  -CUCM 10.5.2

  -TMS 14.6

  -TMSXE 4.1

  -Conductor XC3.0

  -vTPS 4.1

  -TC7.3.0 on all the endpoints (MX300G2, MX800, SX10/80)

  Thank you

  Dennis

  Looks like you hit a bug - fixed in TMS 14.6.1

  https://Tools.Cisco.com/bugsearch/bug/CSCus51732

• Limit the number of calls between areas of VCS/subareas?

  Hello

  I wonder if there is a way that we can limit the number of calls between two subareas, areas or VCS.

  The script as below:

  VCS-E (owncompany) < -----neighbor/traversal/dns="" zone="" over="" internet------=""> > VCS-E (partner)

  My intention is to limit to 5 video calls from VCS-E (partner) so that the 6th call (dial in endpoint) will be blocked.

  I know that we can control the total bandwidth between areas using links & pipes but that does not stop the remote end to lower their rate of recall and deal with several endpoints.

  Thank you.

  Hi Hafiz,

  have you tried to disable the 'downspeed by mode of appeal"in a configuration of Bandwidth?

  try disabling the "downspeed" by call OFF mode under VCS config-. > bandwidth--> configuration.

  This will not allow the calls get the downspeed but it must block because of insufficient bandwidth.

  Thank you

  Alok

• Highway - travelled server option

  Hey,.

  A configuration Expressway for Jabber and found that it lacked the crossing under zones server option. Why is this? the doc 8.1 clearly shows the traversal server option. license related?

  Thank you

  VR

  Server option traveled solely highway E. You have the right license for e. Highway the banner at the top says highway E?

• The configuration of the coast DMVPN speaks with higher bandwidth for traffic shaping

  Dear all,

  We have the unusual situation that on our sites talking DMVPN has a higher bandwidth (33 Mbps) that our

  DMVPN Hub Site.

  Therefore, we must apply to 10 Mbps on the interface of tunnel on the radius of traffic shaping.

  The following link describes only how to make an application in the form at the end of the hub, but not on the site of end spoke:

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_per_tunnel_qos.PDF

  How to proceed with this on the router spoke?

  Creating a service policy and applying then to the tunnel interface will do the job? Put in shape will be before or after encrypting the traffic?

  And then we would need to increase the buffer size of 1024 to something more replay window?

  The following example would work? We would apply the outbound policy to the Tunnel interface:

  class-map match-any CLASS_ANY

   match any 

  policy-map POLICY_SHAPE10MEG

   class CLASS_ANY

    shape average 10000000

  
  
  interface Tunnel 0
  
  service-policy output POLICY_SHAPE10MEG
  
  

  Thanks for your help,

  Thorsten

  I see on the hub strategy is applied successfully on the tunnel. The political POL_SHAPE10MEG is applied on the tunnel you wanted, this way the rays won't be able to consume even if the bandwidth of the hub it has higher bandwidth.

• Dual Wan router inaccessible RV042G after the configuration management of bandwidth

  Hello

  I bought a router of RV042G a few days ago to manage 2 lines adsl at my home. Everything works fine except for one thing: I can't configure bandwidth management. When I go into the menu "Bandwidth management", "Type of bandwidth management" then I choose the frequency control or priority and I have a had a few rules to prioritize the http protocol, for example, then I click the button Save. After a few seconds of internet use I loss the router and internet connectivity and 192.168.1.1 became inaccessible Ping. I had to unplung the power cord to restart the router, the same problem persists until I have remove all the rules! A few times I even had to do a factory reset because my adsl modem is inaccessible behind the router (impossible to do a ping to the gateway).

  What can I do? There is a known issue on this router and firmware? I have:

  Serial number:		NKS16220141	Firmware version:	v4.2.1.02 (January 18, 2012 14:10:55)
  VID PID:		RV042G V01	The firmware MD5 checksum:	a9817f2dbdcbd6a5c109eaa21b1c3545
  LAN			Working mode:	Entry door

  Thanks for your help.

  Could Pascal you please make a backup configuration file.

  Then I would you at the factory to reset the router then once he comes back to the top, login, make your internet work and try the management of bandwidth again without any other configuration. See if it has the same problem.

  If not then this would imply some there is a configuration in conflict with the previous establishment or a software defect that has been corrected through the reset.

  -Tom
  Please mark replied messages useful

• VCS Expressway &amp; movi 4.2 configuration

  Hi all

  I created movi account manually in the TMS and it work perfectly with VCS - control.

  However, it cannot register for VCS expressway. Is it mandatory to have a name authority pointer record in DNS?

  For example, configure us abc.com as the domain name SIP Highway VCS, is mandatory to fix abc.com as public highway VCS by DNS server IP address?

  Thank you

  Ben

  That is to say you do not originate in the AMZ comes directly to the public IP address of the VCSE

  If that's the case at least, you should see registration tent if nothing can be seen then you need to look at the firewall

  is he ASA? try tp packets capture and see why you arew not hitting the VCSE using SIP

  as it could be firewall issue!

  HTH

• Configuration X8.2.1 Expressway

  We strive to set up Expressway in order to use Jabber in and out of the office, but after a week of blood, sweat and tears, we did not get anywhere...

  X8.2.1

  We have tried to follow all the guides provided by Cisco in this configuration, but it doesn't seem to work as expected.

  Our userID in society is userID, e-mail addresses and the addresses used to Jabber [email protected] / * /

  Our channel Express in the DMZ is at expressway.domain.com

  Our internal domain is internalDomain.local

  We have made the necessary DNS entries:

  _collab - edge._tls.domain.com pointing to expressway.domain.com (external DNS)

  _cisco - uds._tcp.domain.com pointing to cucm.internalDomain.local (internal DNS)

  _cuplogin._tcp.domain.com pointing to IMandPresence.internalDomain.local (internal DNS)

  When connect us to Jabber internally, unless we specify the type of account as Cisco Communications Manager 9 or later with the selected default server, it tries to connect to WebEx. (On a client PC)

  We cannot use [email protected] / * / connect because it fails. If connect us with just userID, it works.

  On our phones using Android or iOS internally, the automatic server settings do not work;. If I select Auto and type [email protected] / * /, it tries to connect to WebEx.

  I have to enter my address in format [email protected] / * / to be able to move forward

  If I select the instant messaging and presence as a server type, I am required to enter a server address. If I get domain.com; He tells me that it cannot find the server. If I get the address IP of CUCM; He said once again that he cannot locate the server.

  If I enter the IP address of the instant messaging and presence server, it works.

  Outwardly, nothing works. Here are a few logs a unsuccessful login from an iPhone running 10.6.1

  -2015-03-23 11:17:52.662 INFO [c1ca000] - [csf.dns] [makeQuery] SRV registration. _collab - edge._tls.domain.com.
  --2015-03-23 11:17:52.663 INFO [c24c000] - [csf.edge] [runEventLoop] events entering the reactor-event-loop wire loop reactor
  --2015-03-23 11:17:52.663 INFO [c24c000] - [csf.edge] [runEventLoop] reactor loop event incoming wait()
  -2015-03-23 11:17:52.664 INFO [afbe000] - [csf.edge.capability.CredentialsManagerWrapper] [enableEdge] Edge has been activated
  -2015-03-23 11:17:52.664 INFO [afbe000] - [service-discovery] [getConfigValue] to EdgeSsoExclusivity of ConfigFeatureSet
  -2015-03-23 11:17:52.667 INFO [c1ca000] - [csf.dns] [makeDnsQuery] the response number is 1
  -2015-03-23 11:17:52.668 INFO [c1ca000] - [csf.dns] [logResult] *-* _collab - edge._tls.domain.com of the DNS request. has succeeded.

  [csf.httpclient] [configureEasyRequest] *-* HTTP to request: https://expressway.domain.com:8443 / oauthcb [0]
  -2015-03-23 11:17:52.688 INFO [afbe000] - [csf.httpclient] [CurlHeaders] number of Request Headers: 1
  -2015-03-23 11:17:53.129 INFO [afbe000] - [csf.cert.utils] [parse] number of fields subject Alt name: 2
  -2015-03-23 11:17:53.149 INFO [afbe000] - [csf.cert] [handlePlatformVerificationResultSynchronously] verification result: reason for SUCCESS: [INVALID]
  -2015-03-23 11:17:53.149 INFO [afbe000] - [csf.httpclient] [verifyCertificate] *-* result of verification of certificates: SUCCESS
  --2015-03-23 11:17:53.150 INFO [afbe000] - [csf.httpclient] [verifyCb] certificate verified by application
  --2015-03-23 11:17:53.457 INFO [afbe000] - [csf.httpclient] [curlCodeToResult] curlCode = result [0] = [SUCCESS] active fips = [false]
  -2015-03-23 11:17:53.457 INFO [afbe000] - [csf.httpclient] [executeImpl] *-* response from HTTP: https://expressway.domain.com:8443 / oauthcb [0]-> 400.
  -2015-03-23 11:17:53.458 INFO [afbe000] - [csf.httpclient] [executeImpl] Http Response Code = [400] ask [0].
  --2015-03-23 11:17:53.459 INFO [afbe000] - csf::http:HttpClientResult [csf.config] [mapToHttpUtilsResult] = HttpUtilsResult [SUCCESS] = [SUCCESS]
  -2015-03-23 11:17:53.459 INFO [afbe000] - [csf.config] [isSSOSupported] query load SSO is successful. Result: NOT_SUPPORTED
  -2015-03-23 11:17:53.459 INFO [afbe000] - [edgeSSODetector] [isSSOSupported] VCS has NOT_SUPPORTED SSO and it is not already enabled SSO
  -2015-03-23 11:17:53.460 INFO [afbe000] - [edgeSSODetector] [configureEdgeAndSSO] Edge is NOT enabled sso and there is NO other sso Enabled services
  -2015-03-23 11:17:53.460 INFO [afbe000] - [service-discovery] [inhibitOnPremSSO] inhibitor of corrosion on prem SSO on all components of SSOAware. Known components: 3

  Any help would be incredibly helpful

  Ask your company if they actually use WebEx is priority on local servers

  4 the client issues an HTTP request to a URL of CASES for the Messenger of Cisco WebEx service. This request allows the client to determine if the domain is a valid domain of Cisco WebEx.

  5. the client polls the server names for the following SRV records in order of priority:

  You can also disable webex for search services to your customers to avoid this.

  You are supposed to only use [email protected] / * / for the first time so you will discover the SRV records, then it's just user, until you recover the client. Make sure your SRV records to resolve correctly and that you have all necessary servers in DNS.

  I suggest strongly to reach a partner Cisco to help with this deployment, they allow to check what you've done.

• Configure the network adapter speed / bandwidth management

  Hi all

  In VMware ESX 4, it is possible to configure the speed of vmnic with a speed of diferent? I can do 10, 100, 1000 or full / half-duplex (photos attached) but... is possible to configure the speed of 4 MB, 40 MB or something different?

  For bandwidth management, the best solution is the new Cisco device?

  Thank you very much.

  N ° negotiated between the physical NETWORK adapter and the physical switchport speed can be 10/100/1000. Just like in the physical world...

  But you can do some of the traffic shaping based on your configuration... On a vSwitch standard you can control the evacuation traffic. On a distributed vSwitch, you control evacuation AND penetration.

  / Rubeck

• Strange orders in the log Configuration for VCS Expressway

  Check my journal of VCS configuration, I found hundreds (perhaps many) of these commands:

  2015 04-28 T 16: 14:23 - 03:00	"Elements UTCTime =" 2015-04-28 19:14:23, 928"Event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 2abe7197-a824-4a47-9079-2b16db1410f2 prison: sip-auth current_fails - changed: 0 to: 1"
  2015 04-28 T 16: 14:23 - 03:00	"Elements UTCTime =" 2015-04-28 19:14:23, 928"event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 2abe7197-a824-4a47-9079-2b16db1410f2 prison: sip-auth total_fails - past slot: 4 in: 5"
  2015 04-28 T 16: 13:23 - 03:00	"Elements UTCTime =" 2015-04-28 19:13:23, 900"Event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 09637cfe-b0af-4d6f-9bab-6f59ba305156 prison: current_fails http this intrusion - passed: 0 to: 1"
  2015 04-28 T 16: 13:23 - 03:00	"Elements UTCTime =" 2015-04-28 19:13:23, 900"Event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 09637cfe-b0af-4d6f-9bab-6f59ba305156 prison: total_fails http this intrusion - last: 4 in: 5"
  2015 04-28 T 16: 12:23 - 03:00	"Elements UTCTime =" 2015-04-28 19:12:23, 868"Event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 09637cfe-b0af-4d6f-9bab-6f59ba305156 prison: current_fails http this intrusion - past: 1 to: 0"
  2015 04-28 T 16: 02:23 - 03:00	"" Elements UTCTime = "2015-04-28 19:02:23, 515" Event = 'System Configuration changed"node ="[email protected] / * /"detail =".

  ?all_text=RGV0YWlsPSJ4Y29uZmlndXJhdGlvbiBmYWlsMmJhbkphaWxTdGF0dXMgdXVpZCAwOTYzN2NmZS1iMGFmLTRkNmYtOWJhYi02ZjU5YmEzMDUxNTYgamFpbDogaHR0cC1jZS1pbnRydXNpb24gY3VycmVudF9mYWlscyAtIGNoYW5nZWQgZnJvbTogMCB0bzogMSI=">xconfiguration fail2banJailStatus uuid 09637cfe-b0af-4d6f-9bab-6f59ba305156 jail: http-ce-intrusion current_fails - changed from: 0 to: 1" 2015 04-28 T 16: 02:23 - 03:00 "Elements UTCTime =" 2015-04-28 19:02:23, 515"Event ='System Configuration changed" node = "[email protected] / * /" detail ="xconfiguration fail2banJailStatus uuid 09637cfe-b0af-4d6f-9bab-6f59ba305156 prison: total_fails http this intrusion - last: 3 to: 4"

  What is c? A hacker trying to invade my VCS?

  This highway of VCS is in a public IP address, with the disabled SSH, HTTPS is only allowed.

  In a manner of speaking, possibly.  These are due to having you activated automatic detection.  The IP address 127.0.0.1 is always "self."  The VCS is simply the recording of hack attempts.  You can see the numbers from 0 to 1, 4 or 5, etc., as attempted access failures are recorded.  It depends on what you have set up in the automated detection of which is controlled, and eventually be blocked in case of several events in the detection window.  You will need to look at your configuration and possibly other newspapers to determine if a real intrusion event occurs.

• How to configure bandwidth allowed on the VPN IPSec ASA tunnels?

  ASA 5505 8.2.1

  ASA 5520 8.4

  We currently have a tunnel set up between 2 ASAs

  is 1 - possible to assign 1.5 Mbps of Bandwidth (BW) to this tunnel? Then if Tunnel number 2 is set up I could assign 2 Mbit to this one for example?

  I'm not talking to prioritize certain type of traffic on the IPsec tunnel, I'm talking about Tunnel 1 to 1.5 Mbps of BW guaranteed for all traffic that passes through it. Same for tunnel 2

  Then

  2-How do to control the quantity of biological weapons in an IPsec tunnel?

  Please provide documentation possible

  Thank you

  Johnny

  Hello! Please consult this document:

  https://supportforums.Cisco.com/docs/doc-1230

  ___

  HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".

• How can I configure the perfmon.exe application to monitor internet bandwidth usage?

  I don't need details just how much is used per second.

  Hi MathewMullen,

  See the Microsoft article below and check if it helps.

  How to manage system monitor counters in Windows XP

  http://support.Microsoft.com/kb/305610

• Profile C40 with VCS Starter Pack Expressway system

  Hello guys,.

  Customer not want options like Firewall and the Conference (MCU 5300) crossing.

  But as this is a small script (there around 2 profile C40 + 2 SX20 10 video Jabber), I found that it will be interesting using VCS Starter Pack Expressway. He's no more than 50 records or 25 route calls as shown in the data sheet 'support '.

  I took a look at the topis here and also some documents and say that C40/SX20 are not supported for the supply, but since the SIP/h.323 support, calls should work perfectly.

  No doubt: that the client will lose in terms of features or benefits without the support of this commissioning endpoints?

  It would be a pain in the neck to enter the SX20 or C40 to VCS Starterpack expressway?

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11315/ps11337/data_sheet_c78-697075.html

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Expressway_Starter_Pack_Deployment_Guide_X7-2.PDF

  Thank you!

  Alan

  Olá Alan, respenderei em inglês para fica na don't base dados, mas design sao best respondidas send any video Business forum.

  About your 3 points, depends on:

  (1) even if you deploy the TMS, endpoint will try to get the directory using HTTP/HTTPS connection. If the endpoints are outside / internet, it may be refused by security reasons.

  (2) you can always configure auth on the StarterPack VCS to auth against the local database. At the endpoints configured manually, you can enter the identification information.

  (3) you can configure the bandwidth on VC (subareas or pipes) configuration control or limit directly to each endpoint

  The SX/MX/EX/C series can register the StarPack using a direct connection (h.323/SIP) or behind the FW/NAT using H.460.18/19 or assent. They can local Auth VCS DB. Be aware that the VCS S is usually installed in an external DMZ or directly with a public IP address. In this case, if you have 2 x SX to the internal network and the VCS at the DMZ (with NAT in the middle), all media will be hollow VCS, even if the two SX are on the same subnet.

  PS: Be careful where to include the VCS. If you use NAT on the VCS, basic network license need double.

  It will be useful.

  Concerning

  Elter

• Limit the bandwidth Time Capsule

  I am about to install a new Capsule 3 TB but am simultaneously looking for a solution of throttling split a WIFI network guests & owner. There are only 70 GB p/month available (satellite 2way) and currently you can empty just this pipe in a few weeks, if lucky (streaming, etc...).

  I know that the Time Capsule can accommodate a network comments without restriction of time but will not be enough and is too restrictive.

  Any suggestion would be appreciated.

  Unfortunately, Apple routers have not all parameters that would allow the owner of the control bandwidth allocation... (which is known as QoS or Quality of Service) in some way.

  If your needs call for this type of service, then your only real option would be to add a router with the features you need... and then put in place the time Capsule to run in Bridge Mode.

  Time Capsule provide a 'network of comments' feature when it is configured in Bridge Mode, then you may want to look for a router that would deal with this type of function.