Limitation of log operator
Hi gurus,I wish to withdraw the limitaion of ODI operator log
The limitation is all by displaying the State of employment in the journal O/P more than 100 in a single window,
When the number of jobs running exceeds 100 mark a pop-up window appears asking repeatedly to display more than 100 jobs in the newspaper.
How to change the limit to and how to remove the option of this pop up.
Thanks in advance...
CG
Hi CG.
In the operator, go to file-> user stamped
Choose the operator settings display limit - set the value to 0.
Tags: Business Intelligence
Similar Questions
-
Hello
I was wondering if anyone could confirm whether ESXi has specific restrictions on which log files can be collected from ESX? I ask, that I have installed on my server ESXi, however, I seem to only be able to recover the 'messages' and logs "host agent. The output of "vilogger list" is below:
ESX Server: & lt; deleted & gt;
Status CollectionPeriod NumRotation MaxFileSize log location (second) (Mo)
pass Enabled 60 5 5/var/log/vmware / & lt; deleted & gt; / hostd.log
active messages 5 5 60/var/log/vmware / & lt; deleted & gt; / messages.log
I am particularly interested in collecting the vmkernel associated log files, according to the documentation of VIMA: vmkernel/vmksummary/vmkwarning. Is this possible? If so, how?
Thanks for any help!
The 'messages' on ESXi log file contains the same information that is in the vmkernel and vmkwarnings on ESX ordinary files. The vmksummary log file does not exist on ESXi. The vpxa (VC agent) log file is also accessible via syslog, once the host is attached to an instance of VC. As you pointed out, the log file pass is also available. Currently, other that those three, no other log files are exposed to syslog on ESXi.
-
Operating on Satellite A100 temperature
Hello
I have a laptop Satellite A100 - 237 (PSAA9). I recently updated my BIOS of 1.20 to 2.00 because the unit cannot detach confirmation. After the update, I noticed that the fan of the laptop is still at the average speed to high independently operating environment, CPU load, etc.. It keeps spinning and spinning and my CPU temperature is much higher than before, still at about 57-58 C.
Now, I don't have a clear idea what, exactly, are the limits of the operating temperature normal for my CPU (Centrino Duo 1.83 GHz) but I guess 57-58 C is a little higher. I do not suffer slowdowns or spontaneous reboots or the camera, the unit performs all also large, but heat becomes distress after a while and I'm afraid that I can run in VERY SOON heat-related problems. The unit cools pretty quickly - down a bit - and when I put it to sleep, but after session restore heat accumulate again. In addition, the heat is more visible on the left side of the device, but I think is quite normal that the CPU and the HARD drive is located on the left.
I bought my camera in August and have not been cleaned once again. I should get cleaned CPU fan? Wouldn't be of any help?
The temperature of the CPU of 57-58 C is not uncommon. It s a normal life. I guess the CPU temperature can increases to 70 ° C when performance heavy as 3D or games software is running.
Of course, it s advisable to clean the fans from time to time.But what about Toshiba Power saver settings? Here, you can change the CPU speed treatment and cooling modes.
-
Operation failed. Validation of the backup task execution failed error message on startp
Title: backup original validation task execution failed
Receive message at next startup:
Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.
I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.
Hi BobBianconi,
(1) since when are you facing this problem?
(2) what backup program do you use?
It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.
The following steps can worth a try:
Method 1: Run the fixit available in the link below for common system maintenance tasks.
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.
Method 2: activate the boot and then check if the problem persistsFollow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
log4j: logs record various appenders
Hello
I have this like log4j.properties
log4j.rootCategory = DEBUG, file, log, stdout
log4j. Category.MUTE = OFF
log4j.appender.StdOut.threshold = ERROR
log4j.appender.stdout = org.apache.log4j.ConsoleAppender
log4j.appender.StdOut.layout = org.apache.log4j.PatternLayout
log4j.appender.StdOut.layout.ConversionPattern = %d % {ABSOLUTE} 5 p [%t] %c - %m %n
log4j.appender.file.threshold = ${qtl.log.level}
log4j.appender.file.file = ${qtl.log.operation}
log4j.appender.file.MaxFileSize = 10 MB
log4j.appender.file.MaxBackupIndex = 10
log4j.appender.file = org.apache.log4j.RollingFileAppender
log4j.appender.file.layout = org.apache.log4j.PatternLayout
log4j.appender.file.layout.ConversionPattern = % - 5 p | % - 80 m | %d %n
log4j.appender.logfile.file = ${qtl.log.application}
log4j.appender.logfile.MaxFileSize = 10 MB
log4j.appender.logfile.MaxBackupIndex = 10
log4j.appender.logfile = org.apache.log4j.RollingFileAppender
log4j.appender.logfile.layout = org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern = % - 5 p | % - 80 m | %d %n
for these two appenders of different file, I want to instantiate two different loggers so how can I do
at the present time I am instantiating journal like this
String callingClassName = Thread.currentThread () .getStackTrace () [2] .getClass () .getCanonicalName ();
Return Logger.getLogger (callingClassName);log4j.logger.myFile1=debug,file log4j.logger.myFile2=debug,Logfile
in Java Code, you will need to choose one or the other paper:
Logger fl1= Logger.getLogger("myFile1");// loggs to {qtl.log.operation} Logger fl2= Logger.getLogger("myFile2"); // loggs to ${qtl.log.application}
Good bye
DPT -
No limitation on the number of subfolders under shared folders?
Hi all
We receive requests for groups of users who want to group records and wanted to check to see if anyone has come across limits number subfolders under shared folders?
Thank you.His is more on the limitation of the operating system.
Visit this link
http://docs.Oracle.com/CD/E21764_01/bi.1111/e10541/prescatadmin.htm#BAJBJIGAIf brand pls help
-
Hello
I have a doubt. My DB still has the UNRECOVERABLE_TIME column in V$ DATAFILE filled with a time almost.
Do I have a problem in this data file recovery if my backup is running before that time? Recovery: If the tables with logging inside this data file, can I get it back?
Best regardsDo I have a problem in this data file recovery if my backup is running before that time?
Yes, these "UNRECOVERABLE_TIME" operations point NOLOGGING operations, not mentioned in the log files. Normal LOGGING operations are not affected, tgey may be retrieved from the log files.
Werner
-
Can register on EM and Admin Console but not Analytics - down presentation server
I installed 11G on Windows 7 Enterprise. I am able to sign on Enterprise Manager and the Administration Console but not in analytics.
The presentation server is down and there is a message in the nqserver.log about a problem with the oracle.bi.security.service. I pasted the nqserver.log and the sawlog0.log file and the file nqsconfig.ini below.
I checked the BISystemUser into the realms of Weblogic Administration Console/security/myrealm and reset the password.
I also have to reset the password for BISystemUser in Weblogic Enterprise Manager/WebLogic Domain/Security/Credentials/oracle.bi.system
Then restarted services.
I checked to see that there's no lock on DEV_MDS and DEV_BIPLATFORM.
I tried to restart the services on several occasions without any modification.
I don't know what else to check or how to proceed. Is there anything else I should check to identify what I might need to the difficulty of obtaining this race?
Thank you
Dara
c:\OBIEE11G\instances\instance2 > opmnctl status
Process pending: instance2
---------------------------------+--------------------+---------+---------
IAS-component | process type. The NEST | status
---------------------------------+--------------------+---------+---------
essbasestudio1 | EssbaseStudio | 0 | NONE
essbaseserver1 | Essbase | N/A | Down
coreapplication_obiccs1 | OracleBIClusterCo ~ | 3940 | Alive
coreapplication_obisch1 | OracleBIScheduler ~ | 7504. Alive
coreapplication_obijh1 | OracleBIJavaHostC ~ | 7452 | Alive
coreapplication_obips1 | OracleBIPresentat ~ | N/A | Down
coreapplication_obis1 | OracleBIServerCom ~ | 2476 | Alive
nqserver.log
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [36007] loading repository C:\OBIEE11G\instances\instance2\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0018.rpd.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] domain [14055] loading: SampleApp Lite...
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] [14056] done to the sector of activity: SampleApp Lite.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [58002] Query Cache loaded with 0 entries registered the cache files.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85003] MDX member name Cache subsystem has been started successfully.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85004] member recovered MDX entered names Cache subsystem: 0, size: 0 bytes.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [13026] error getting BI Security Service roles: "' an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error '"
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [46172] store security database is not available, do not re - associate with this type of provider.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] nqsserver: started clustered Oracle BI Server (64-bit). Version: 11.1.1.7.0.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1fbc] [43071] a connection with THE Cluster controller - 2083841:9706 was created.
[2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] [nQSError: 43126] failed authentication: invalid user/password.
[2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] [nQSError: 43126] failed authentication: invalid user/password.
[2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] [nQSError: 43126] failed authentication: invalid user/password.
sawlog0.log
[2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services (OBIPS) 11.1.1.7.0 (130303.2025 64-bit Build) start. [[
Leader: sawserver.cpp
Online: 455
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [WARNING: 16] [] [saw.mas.csf] [ecid:] [tid:] store database security is not available, do not re - associate with this type of provider. [[
Leader: csfwrapperimpl.cpp
Online: 152
Geographical area:
Saw.Mas.CSF
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:53.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] security query's timeout is: 120 []
Leader: odbcuserpoploaderimpl.cpp
Line: 1068
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.webextensionbase.init.workstationCheck] [ecid:] [tid:] WARNING: The Oracle BI Presentation server Services is running on a machine of class workstation (Windows XP Professional, Windows 7 Professional, etc). The number of concurrent users may be severely limited by the operating system. [[
Leader: webextensionbase.cpp
Online: 492
Geographical area:
saw.webextensionbase.init.workstationCheck
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.local.checkforcatalogupgrade] [ecid:] [tid:] update is recommended in the latest version of the catalog. [[
Leader: localwebcatalog.cpp
Online: 242
Geographical area:
Saw.Catalog.local.checkforcatalogupgrade
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
NQSConfig.INI
###############################################################################
#
# NQSConfig.INI
#
# Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
#
# INI file parser rules are:
# If the values are in literals, numbers, or _, they may be
# given as such. If the values contain characters other than
literals #, numbers or _, the values must be in quotes.
#
###############################################################################
###############################################################################
#
# Article repository
#
# Repositories are defined as the name of the logical repository - file name
pairs of #. ODBC drivers use names of logical repository defined in this
# section.
#
# All repositories must reside within the Oracle BI Server instance
Directory of repository #.
#
###############################################################################
[REPOSITORY]
Star = SampleAppLite_BI0018.rpd, default value; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
# Query result Cache Section
#
###############################################################################
[CACHE]
ACTIVATE = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
# A list separated by commas of the < maxSize directory > pairs.
# They are relative to the directory of the process instance.
# e.g. DATA_STORAGE_PATHS = "nQSCache" 500 MB;
# resolves to
# $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / nQSCache
DATA_STORAGE_PATHS = "cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; # 0 is an unlimited size
MAX_CACHE_ENTRY_SIZE = 20 MB; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_CACHE_ENTRIES = 1000; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
DISABLE_SUBREQUEST_CACHING = NO;
#Cache the size of the file buffer. Default is 128 KB
CACHE_FILE_BUFFER_SIZE = 128 KB;
# Cluster cache.
# Note that, since it is a network share, the directory should not be
# relative.
GLOBAL_CACHE_STORAGE_PATH = "' 0 MB; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_GLOBAL_CACHE_ENTRIES = 1000;
CACHE_POLL_SECONDS = 300;
CLUSTER_AWARE_CACHE_LOGGING = NO;
###############################################################################
#
# General section
#
# Contains general settings of the default server location
# and internationalization, temporary space and memory, allocation
# and other default parameters used to determine how data is returned
# from the server to a client.
#
###############################################################################
[GENERAL]
# Localization/internationalization settings.
LOCAL = "English - United States";
SORT_ORDER_LOCALE = "English - United States";
SORT_TYPE = "binary";
# Case must be adjusted with the remote control
target database of the #.
CASE_SENSITIVE_CHARACTER_COMPARISON = ON;
# SQLServer65 sorts NULL values first, while Oracle sorts
# nulls last. This property of ini file must conform to the
# of the remote target database, if there is a
# unique remote database. Otherwise, choose the command
# that corresponds to the database (i.e. the)
# based on the volume of data, frequency of access, sorting
# bandwidth performance).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh ';
DATE_DISPLAY_FORMAT = "yyyy/mm/dd";
TIME_DISPLAY_FORMAT = "hh."
# Allocation of temporary space, memory and resources
# parameters.
# You can use KB, MB for memory size.
# Working directory paths can be left empty and default
# for the temp of the process instance directory. For example,.
# $(ORACLE_INSTANCE) / temp/OracleBIServerComponent / < InstanceName >.
# If it is relative, it will be compared to this path. So absolute.
# We take the absolute path when running.
WORK_DIRECTORY_PATHS = "";
VIRTUAL_TABLE_PAGE_SIZE = 128 KB;
# Analytics Server returns all month names and day three
abbreviations # (for example, "Jan", "Feb", "Sat", "Sun").
# To use full names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
USE_UPPERCASE_MONTH_NAMES = NO;
USE_UPPERCASE_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO; # default is none
###############################################################################
#
# Security section
#
# The legal value for DEFAULT_PRIVILEGES are:
# NO READ
#
###############################################################################
[SECURITY]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL = YES; # default is none
# Note that the below paths must be relative to the instance
directories of config # if specified. for example,.
# $(ORACLE_INSTANCE) / config/OracleBIServerComponent / < InstanceName >
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; default value is none.
SSL = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-cert.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_PRIVATE_KEY_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-key.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_VERIFY_SERVERS = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_VERIFY_CLIENTS = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_CA_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\combinedcacert.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_TRUSTED_PEER_DNS ="";
SSL_CERT_VERIFICATION_DEPTH = 9;
SSL_CIPHER_LIST ="";
###############################################################################
#
# Server section
#
###############################################################################
[SERVER]
READ_ONLY_MODE = NO; # It is both online and offline - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_SESSION_LIMIT = 2000;
MAX_REQUEST_PER_SESSION_LIMIT = 5000;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
HTTP_CLIENT_THREAD_RANGE = 0-100;
HTTP_CLIENT_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; # default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; # default is 1024
MAX_QUERY_PLAN_CACHE_ENTRY_SIZE = 0; # default is 256 KB, (in 32-BIT mode), 1 MB (64-bit), the default value to 0
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; # default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; # default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; # default is 20
CLIENT_MGMT_THREADS_MAX = 5; # default is 5
# This specifies the port number and IP that the server will be
# listen to. When it is set to 0.0.0.0, the server listens on all IPs
# address on the machine, otherwise the server will bind to the
# specified ip address.
RPC_SERVICE_OR_PORT = "9703; # default is 0.0.0.0:9703 - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
LISTEN_ADDRESS = "0.0.0.0"; # default is 0.0.0.0
LISTEN_PORT = 9703; # default is 9703
ENABLE_DB_HINTS = YES; # default is Yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
# Suite required if CLUSTER_PARTICIPANT = YES
# The directory of publication must be a full path as it should
# a shared drive.
REQUIRE_PUBLISHING_DIRECTORY = NO; # Do not join the cluster if the directory is not accessible - Configuration of this setting is managed by Oracle Enterprise Manager Fusion Middleware control
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
VARIABLE_VALUE_LIMIT = 4096;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with the permission of manageRepositories
# 2: evaluate is supported for all users.
# other: assess only is not supported if the value is something else.
EVALUATE_SUPPORT_LEVEL = 0;
FMW_SECURITY_SERVICE_URL = " " http://131.216.37.7:7001 "; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
FMW_SECURITY_SERVICE_MAX_NUMBER_OF_CONNECTIONS = 2000;
FMW_SECURITY_SERVICE_MAX_NUMBER_OF_RETRIES = 0;
# FMW_SECURITY_SERVICE_RETRY_EXCEPTION_SUBSTRING = "closed by force."
FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = NO;
# ENABLE_NUMERIC_DATA_TYPE:
# When this setting is enabled, the Administration tool will be
# import, data type Oracle/TimesTen number as the type of digital data in physics
column definition #. Oracle BI Server will interpret the Oracle Number data
# type in the form of digital data internally during its execution.
ENABLE_NUMERIC_DATA_TYPE = NO;
MONITOR_PORT = "9701; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
ORACLEHARDWAREACCELERATION = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
Article # high availability
#
###############################################################################
[HIGH_AVAILABILITY]
HA_DB_PING_PERIOD_MILLISECS = 60000;
###############################################################################
#
# Dynamic library section
#
# Dynamic libraries specified in this section
# are classified by the CLI, they take over.
#
###############################################################################
[DB_DYNAMIC_LIBRARY]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
Oci8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
BAPI = nqsdbgatewaysapbapi;
ESSBASE = nqsdbgatewayessbasecapi;
OracleADF = nqsdbgatewayoracleadf;
OracleADF_HTTP = nqsdbgatewayoracleadf;
OracleCEP_HTTP = nqsdbgatewayoraclecep;
HyperionADM = nqsdbgatewayadm;
OracleWS = nqsdbgatewayoraclews;
Hadoop = nqsdbgatewayhadoop;
TimesTen = nqsdbgatewaytimesten;
timesten35 = nqsdbgatewaytimesten35;
###############################################################################
#
# Section monitoring of use
#
# Collect usage on each logical query statistics submitted to the
# Server.
#
###############################################################################
[USAGE_TRACKING]
ACTIVATE = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#==============================================================================
# Parameters used to write the data to a flat file (e.g., DIRECT_INSERT = NO).
#
# Note that the directory must be relative to the directory of the instance.
# In general, we prefer directo insert flat files. If you work in
# a cluster, it is recommended that you use direct insertion. If there is
a single instance Oracle BI Server #, then you can use data from flat files.
# The directory is assumed from the process instance. For
example #, "UTData" is resolved to
# "$(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / UTData.
STORAGE_DIRECTORY = 'path to the <>directory ";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = 'ANSI '; # ANSI, UTF8, 1252, etc..
#
#==============================================================================
DIRECT_INSERT = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#==============================================================================
# Parameters to insert data in a table (for example DIRECT_INSERT = YES).
#
PHYSICAL_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > '; # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
CONNECTION_POOL = "<>database". "<>Connection pool '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
BUFFER_SIZE = 250 MB;
BUFFER_TIME_LIMIT_SECONDS = 5;
NUM_INSERT_THREADS = 5;
MAX_INSERTS_PER_TRANSACTION = 1;
#
#==============================================================================
SUMMARY_STATISTICS_LOGGING = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SUMMARY_ADVISOR_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > '; # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
# Query optimization flags
#
###############################################################################
[OPTIMIZATION_FLAGS]
STRONG_DATETIME_TYPE_CHECKING = ON;
###############################################################################
#
# MDX member name Section Cache
#
# Subsystem of cache for the mapping between the unique name and the legend of
number of members of all SAP/BW cubes in the repository.
#
###############################################################################
[MDX_MEMBER_CACHE]
# The entry to indicate that if the feature is enabled or not, by default, NO because it applies only to the SAP/BW cubes
ACTIVATE = YES;
# The path to the location where the cache is persisted, applies to one place.
# the number at the end indicates the storage capacity. When the feature is activated,
# administrator must replace the "< directory path >" with a valid path.
# This cache will be relative to the directory of the process instance data. For
example: #
# DATA_STORAGE_PATH = "MDXCache" 500 MB;
# resolves to:
# $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / MDXCache
DATA_STORAGE_PATH is "MDXCache" 500 MB.;
# Space maximum allowed for each user.
MAX_SIZE_PER_USER = 100 MB;
# Number of members in a level can be kept on the disk
MAX_MEMBER_PER_LEVEL = 1000;
# Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB;
###############################################################################
#
# Section aggregation persistence
#
###############################################################################
[AGGREGATE_PERSISTENCE]
# Persistence default aggregation
# The prefix must be between 1 and 8 characters
# and should not have special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_;
AGGREGATE_THREAD_POOL_SIZE = 5;
AGGREGATE_AW_NAME = "OBI_AW";
PREAGGREGATE_AW_CUBE = YES;
###############################################################################
#
# Section Javahost
#
###############################################################################
[JAVAHOST]
JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = "AI - 2083841:9810"; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = '< machine-name1 >': < port_number1 >, < machine-name2 >: < port_number2 >;
###############################################################################
#
# Section Datamart Automation
#
###############################################################################
[DATAMART_AUTOMATION]
' ESSBASE_STUDIO_URL = ' http://localhost:9080/dma/dmaservlet ";
ESSBASE_SERVER = "localhost";
DMA_DATABASE = "DMA_DB";
Intresting...
I recommend you go through the below article
Rittman Mead Consulting & raquo; Blog Archive & raquo; OBIEE / FMW and networking on the DHCP hosts
Thank you
Angelique
-
WebLogic 11.1.1.7 could not reserve enough space for lots of things
This message is for weblogic startup after installing soa suite/weblogic. When you start Weblogic it fails immediately and you get this message (if you are using windows, the just command window dies, then open a prompt back, cd to the directory of your startWebLogic.cmd and run it from the command line).
The generated error will be:
Error occurred during initialization of VM
Could not reserve enough space for lots of things
Update:
The first time I tried this I was in every way because I didn't know which configurations would work. This time, I did only these values, and it worked fine.in the setDomainEnv.cmd file
Changed
Set XMS_SUN_64BIT = 256
Set XMS_SUN_32BIT = 256
Set XMX_SUN_64BIT = 512
Set XMX_SUN_32BIT = 512
etc...Changed to
Set XMS_SUN_64BIT = 512
Set XMS_SUN_32BIT = 512
Set XMX_SUN_64BIT = 1024
Set XMX_SUN_32BIT = 1024
Set XMS_JROCKIT_64BIT = 512
Set XMS_JROCKIT_32BIT = 512
Set XMX_JROCKIT_64BIT = 1024
Set XMX_JROCKIT_32BIT = 1024I also commented on the section rolling too these values under section USER_MEM_ARGS
@REMif is NOT () "% USER_MEM_ARGS %"is.
@REM set MEM_ARGS = % USER_MEM_ARGS %
@REM)
Original post___
I just installed soa suite 11.1.1.7, but downloaded from the OSB page, if it is different from the SOA download page. I'm on a windows 7 64-bit machine, but installed the 32-bit version.I couldn't start weblogic with the setDomainEnv.cmd original settings and found this post
My original settings where
Set XMS_SUN_64BIT = 256
Set XMS_SUN_32BIT = 256
Set XMX_SUN_64BIT = 512
Set XMX_SUN_32BIT = 512
etc...That position suggested upping the parameters to 2048. He has not worked for me. Instead, when I finally reduced values to 1024 it worked. (I wasn't clear what parameters must be defined on anything, so I put almost all 1024, although the permsize I read somewhere should be half the other parameters.)
I was kind of all over the place because there were so many different xmx or xms values, so
If you make these changes, but when to start weblogic, they do not appear on the first part, then look at commenting on article that refers to USER_MEM_ARGS, which go up the settings too much you can do.
Here's the result when you run weblogic at Xms2048m-Xmx2048m - XX: CompileThreshold = 8000 - XX: PermSize = 512 m (which didn't work - she also did not work with the original settings).C:\WlsSOA\JDK160~1\bin\java-client-Xms2048m-Xmx2048m - XX : CompileThreshold = 8000 - XX : PermSize = 512m - XX : MaxPermSize = 512m-Dweblogic.Name=AdminServer-Djava.security.policy=C:\WlsSOA\WLSERV~1.3\server\lib\weblogic.policy - Xverify : none - Xverify : aucun-da-Dplatform.home=C:\WlsSOA\WLSERV~1.3-Dwls.home=C:\WlsSOA\WLSERV~1.3\server-Dweblogic.home=C:\WlsSOA\WLSERV~1.3\server-Dcommon.components.home=C:\WlsSOA\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1-Djrockit.optfile=C:\WlsSO
A\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\servers\AdminServer-Doracle.domain.config.dir=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\ -Doracle.deployed.app.dir=C:\WlsSOA\USER_ P ~ 1\SOA\domains\SOA_DO ~ 1\serve fmwconfig\jps-config. XML
rs\AdminServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\WlsSOA\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\WlsSOA\ORACLE~1\modules\oracle.oamprovider_11.1.1,C:\WlsSOA\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol"| "Oracle.fabric.Common.classloaderurl.Handler" | " "Oracle.fabric.Common.uddiurl.Handler" | " "Oracle.BPM.IO.FS.Protocol - Dweblogic.jdbc.remoteEnabled = false - da: org.apache.xmlbeans... - Dbpm.enabled=true-Dsoa.archives.dir=C:\WlsSOA\Oracle_SOA1\soa-Dsoa.oracle.home=C:\WlsSOA\Oracle_SOA1-Dsoa.instance.home=C:\Wls
SOA\USER_P ~ 1\SOA\domains\SOA_DO ~ 1 - Dtangosol.coherence.clusteraddress=227.7.7.9-Dtangosol.coherence.clusterport=9778-Dtangosol.coherence.log=jdk-Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl-Dweblogic.transaction.blocking.commit=true-Dweblogic.transaction.blocking.rollback=true-Djavax.net.ssl.trustStore=C:\WlsSOA\WLSERV~1.3\server\lib\DemoTrust.jks-Dem.oracle.home=C:\WlsSOA\oracle_common-Djava.awt.headless=true-Dums.oracle.home=C:\WlsSOA\Oracle_SOA1-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole= - Dwebl
OGIC.ext.dirs=C:\WlsSOA\patch_wls1036\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_oepe180\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_ocp371\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_adfr1111\profiles\default\sysext_manifest_classpath weblogic. Server
Error occurred during initialization of VM
Could not reserve enough space for lots of thingsPublished by: Stuart Fleming on 14 April 2013 06:24
Published by: Stuart Fleming on 21 April 2013 06:08
Published by: Stuart Fleming on 7 may 2013 18:05 - added the name of the file!
Published by: Stuart Fleming on 7 may 2013 18:22
Post edited by: StuartFleming
Hi Stuart,
You may be using hardware 32 bit or a 32-bit JDK and therefore the error occurred during initialization of VM
ERROR: "could not reserve enough space for lots of things.If you use a 32-bit with WLS JDK and try to allocate more than 2 GB (or according to the limitations of the operating system: for certain combinations of OS/FMV is greater or less than 2 GB) memory for the java process, allocating memory fails and throws the exception specified.
If you use a 32-bit JDK, then the following OS limitations exist:
Windows OS
32-bit: address space of 4 GB (232-1)
For the core 2G + 2G for space Application
1.5 G Max heap size (remaining natives + battery)
64-bit: address space 16 terabytes
No limit on the size of the heapFor all other UNIX machines:
Linux OS:
32-bit: address space of 4 GB (232-1)
1.3 G for nucleus + 2.7 G for space Application
2.0 G max heap size (remaining natives + battery)
64-bit: address space 16 terabytes
No limit on the size of the heapSOLARIS:
32-bit: address space of 4 GB (232-1)
2.0 g per core + 2.0 G of Application space
1.5 G Max heap size (remaining natives + battery)
64-bit: address space 16 terabytes
No limit on the size of the heapAIX:
32-bit: address space of 4 GB (232-1)
1.0 G for nucleus + 3.0 G of Application space
2.4 G max heap size (remaining natives + battery)
64-bit: address space 16 terabytes
No limit on the size of the heapHP - UX:
32-bit: address space of 4 GB (232-1)
0.2 G core + 3.8 G for space Application
3.0 G max heap size (remaining natives + battery)
64-bit: address space 16 terabytes
No limit on the size of the heapAlso check the available physical memory on the computer. Cannot set the segment size to more than 75% of the available physical memory.
Here is the Solution to your problem
Upgrade to a 64 bit JDK.
OR
If you cannot upgrade to hardware 64-bit and a 64-bit JDK *, and then set the maximum segment size to one of the following based on the operating system:
Windows: 1.5 G
Linux: 2.0 G
Solaris: 1.5 G
AIX: 2.4 G
HP - UX: 3.0 GHope this helps!
Thank you
VijayaPublished by: Vijaya_Gopal on May 8, 2013 09:59
-
Not able to connect to an existing ROW
Hello Experts,
I have the following Setup
2 ESX1 & ESX2 - bith 3.5i update 4 esx servers
2 in each ESX virtual machines. VM1 and VM2 (Cluster in the box) with Windows 2003 R2.
I am trying to create the LUN in node1 and connect to node2. He gets success in node1 but fails in node2 while adding the LUN. Here is the hostd.log in the 2nd ESX Server (for my entries in deviceConfig) while adding the ROW already created.
dynamicType = <unset>, changeVersion = "2009-08-04T14:06:41.290894Z", name = <unset>, version = <unset>, uuid = <unset>, npivWorldWideNameType = <unset>, npivWorldWideNameOp = <unset>, locationId = <unset>, guestId = <unset>, alternateGuestName = <unset>, annotation = <unset>, files = (vim.vm.FileInfo) null, tools = (vim.vm.ToolsConfigInfo) null, flags = (vim.vm.FlagInfo) null, consolePreferences = (vim.vm.ConsolePreferences) null, powerOpInfo = (vim.vm.DefaultPowerOpInfo) null, numCPUs = <unset>, memoryMB = <unset>, deviceChange = (vim.vm.device.VirtualDeviceSpec) [ (vim.vm.device.VirtualDeviceSpec) { dynamicType = <unset>, operation = "add", fileOperation = <unset>, device = (vim.vm.device.VirtualDisk) { dynamicType = <unset>, key = -1, deviceInfo = (vim.Description) null, backing = (vim.vm.device.VirtualDisk.RawDiskMappingVer1BackingInfo) { dynamicType = <unset>, fileName = "/vmfs/volumes/4a5240ff-e56ad8d6-7853-001a64c6f54c/clus1N1w2k3R2x86_141/clus1N1w2k3R2x86_141_SD_f270-248-39_hoi5KoR4xlnd_22.vmdk", datastore = 'vim.Datastore:datastore-229', lunUuid = <unset>, deviceName = <unset>, compatibilityMode = "physicalMode", diskMode = "", uuid = <unset>, }, connectable = (vim.vm.device.VirtualDevice.ConnectInfo) { dynamicType = <unset>, startConnected = true, allowGuestControl = false, connected = true, }, controllerKey = 1001, unitNumber = 2, capacityInKB = 9253376, shares = (vim.SharesInfo) null, }, } ], cpuAllocation = (vim.ResourceAllocationInfo) null, memoryAllocation = (vim.ResourceAllocationInfo) null, cpuAffinity = (vim.vm.AffinityInfo) null, memoryAffinity = (vim.vm.AffinityInfo) null, networkShaper = (vim.vm.NetworkShaperInfo) null, swapPlacement = <unset>, bootOptions = (vim.vm.BootOptions) null, }
Finally he error saying "/ vmfs/volumes/4a5240ff-e56ad8d6-7853-001a64c6f54c/clus1N1w2k3R2x86_141/clus1N1w2k3R2x86_141_SD_f270-248-39_hoi5KoR4xlnd_22.vmdk"or one of the disks instant depends. "
I followed document VMWare to create the cluster (both 2.5 u * and 4.0). Important point is my code works absolutely fine ESX4.0 and cluster MSCS 2 k 3 and 2 k 8 failover cluster. I am able to create a floppy disk in a single node and add it to the second node.
My question is
1A all cluster in the box with ESX 3.5i and seen this problem?
2. is Windows 2 k 3 R2 officially supported by vmware?
3 I missed all the other parameters that is specific to ESX 3.5?
4. I don't know if there are any newspaper vmkernel in ESX3.5i. If its there where can find the vmkernel journal?
No indication in this regard is appreciated.
-Sylvie
3. my cluster is already upwards and able to see the node and quorum within cluster administrator.
So many ESX point of view, it's all ok.
4. do not find the journal in the directory as/var/log/vmare or/var/log. is it possible to allow the newspapers if it is not enabled by any chance? Just a note, this is an esxi esx 3.5 server.
Right, ESXi is quite different, see:
Find any kind of checker configuration tool for this environment?
For ESX configuration is fairly simple.
For Windows, the cluster wizard will do a lot of due diligence.
You can try another tutorial for cluster installation, see:
Software clustering in a VMware environment
André
-
What is unrecoverable; report
RMAN > unrecoverable report;
Files report requiring a backup due to unrecoverable operations
Type of file backup name required
---- ----------------------- -----------------------------------
22 full or incremental /u02/proddata/a_txn_data01.dbf
23 full or incremental /u02/proddata/a_txn_data02.dbf
24 full or incremental /u02/proddata/a_txn_data03.dbf
39 full or incremental /u02/proddata/a_txn_data04.dbf
each time indicates this value after the rman full backup
Why and what is the solutionHello
What should be the database logging or NOLOGGING mode.
Not to be confused with Operation FORESTIERE/NOLOGGING/ARCHIVELOG NOARCHIVELOG.
A database may be in ARCHIVELOG mode and have Tables / Tablespaces using the NOLOGGING to allow unregistered operations.
A non-logged operation can improve performance in some cases (heavy,...), but should be used with caution. If you need to recover a database in which there were a non documented DML, some blocks may be marked as corrupted.
NOLOGGING mode must therefore be limited to Tables that you can re-create and reload easily. For example, the temporary Tables that does not store permanent data.
Otherwise, avoid using the NOLOGGING mode in database Production.
Please find attached a very interesting link on this topic:
http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:5280714813869
Hope this helps.
Best regards
Jean Valentine -
I have a 2008 24 "iMac at home that I use for graphic design and general use. She is still ongoing to 10.5.8 because of some old software, that I was not willing to buy, especially now that Adobe uses the subscription model. I replaced the HD and the screen in detail, but the BONE itself is really starting to show its age. I would love to continue using it until it dies, but the limits with the operating system and software are originally problems more. Also, it tends to slow down much after that I used it for a while and requires a reboot or some 'off' time to get up to speed. Browsers are more extensible and I get constant messages telling me that they are no longer compatible when visiting certain sites. Facebook is almost unusable. Photoshop and other programs I have on it work well for most, and I'll probably keep around as simple workstation when I upgraded. But it has become rather limiting.
24 "is perfect for my work space. My son has the thinner 21.5 "model of (I think) 2013, but this form factor seems a bit small for me what I'm doing. After the visit to the Apple Store, I almost think that the current model of 27 '' is too big, but I would probably get used to. That's what I would try to upgrade to, funds, and all permits. I am currently using the Mac Pro 2012 w / Cinema Display to work, so am a bit spoiled by all this space on the screen and the ability. I need the portability, so laptops seem unnecessarily expensive for what you get. I don't have a ton of power for video editing or work with very large files and the 2008 iMac is sufficient for most.
Well, it's tedious, but I wanted to give some information. I wonder if there is some way I can get some time of my 2008 iMac. I can't wait to have some older software become unusable if I upgrade the operating system, and I don't even know if she plays well with El Capitan, however it is supposed to be able to handle it. In addition, I am concerned my Time Machine backup files may not be accessible, but maybe it's a question to a whole new thread. then, have I not all options to modernize and to continue to use this iMac without losing all existing programs and old files slightly, and if I bite the bullet, would you say that the retina 5K 27 "iMac is a good machine. I enjoyed my 2008 iMac, but he had more than his share of the problem compared to the workstations of the end of the 1990s and early 2000s.
Any input is appreciated, thank you!
A 2008 iMac is very old, you can continue to operate it as you want, it seems that you are aware of its limits, then how long you choose to use it is yours of course. Current IMacs are incredibly more efficient and faster than your 2008. You can watch one of the lanes are refurbished Apple machines. They have no problem, you can save hundreds of dollars and have the same warranty as the new (1 year) and also be able to get the AppleCare for it. They are almost identical to the new machines, the ONLY limitation is that they sell out quickly, and they may not have the exact configuration you want. If they don't so be patient and keep looking because the inventory is changing very quickly...
If a 21.5 "display is too small and a 27" is too large, then you can be a candidate for a Mac Mini. By taking this road you can choose any screen you want. The current MM Limited upgrade options (a bit like iMacs) is much more powerful than your current iMac.
Running of the software has its limits too, as you know. From now on, I highly recommend that maintain you your applications. By continuing to run the outdated software, you will still find yourself in the same situation. This means that when you want to upgrade the hardware, your software costs will be extremely expensive. If you stay in the know, at least the cost of updates (assuming that there is a cost) is spread in time and is not as painful.
-
QuickLook works do not for the pictures in Messages
I am a very experienced user with multiple Macs and several iOS devices, all El Capitan running (or Yosemite) and iOS 9.3 and all messages (SMS/text/iCloud) synchronize correctly between all devices. But on my main Mac, a 2015 (MBP) (El Capitan) MacBook Pro, if someone texted me photo, when I select this picture, and then use the space bar to call QuickLook (to enlarge the photo), I get a window (white) large, empty, instead of the actual image:
(Interestingly, the empty window door the correct name of the photo, but no image).
So, on this machine, if I want to display an image that I received, I have to drag Messages on the desktop, and then I can use QuickLook. But QuickLook refuse to work within the Messages.app. (This is NOT the case on any of my other Macs. On these machines, when I hit the space bar, I get a larger version of the picture, as expected. "But it's the Mac I use more often!)
I should also mention that this MBP is new, and its contents have been cloned, from a backup of my previous MBP a few weeks ago. And the previous MBP had the same problem, both in El Capitan and previously in Yosemite. This seems to suggest that there is a kind of corruption, somewhere.
Any suggestions?
I've considered trashing preferences, but Messages has several preferences files, and I don't know which ones to affect function. I'm fine with reset preferences of the application or on the way home my account information. But more importantly, if possible, I don't want to lose my message history. :-)
Preferably related files include:
com.apple.imservice.iMessage.plist
com Apple.IMessage.Bag.plist
com Apple.iChat.plist
com Apple.imagent.plist
No one knows which of these may be better to try to remove, while retaining the history of my message? Alternatively, if I'm on the wrong track, I would appreciate any other suggestions.
Thank you!
Hello
The captain also lacks the ability to open preview
This photo is also an AIM chat who actually sent this photo 'online' if I zip (Compress) them.
com Apple.iChat.plist is not holder iMessage 'story' that he she now holds the recent list of cat (which is useless because there is no option in the file Menu to access). It also holds all preferences and Settings Menu d ' option.
com Apple.imagent.com holds the account names of all accounts that you have and are involved in logging operations behind the scenes. There is a process called image that starts when the computer does and it will be based on the setting in the General Section identify enough to 'listen' servers. The parameter in the section general read "when I leave Messages, set the status offline" - it does not affect the iMessages account that will always show offline Messages.
com.apple.imservice.iMessage.plist it is not longer used. Yosemite El Capitan, it uses com.apple.ids.service.com.apple.madrid.plist instead. It is also only on the info on behalf of iMessages and not on the 'history' or how pictures of cats are treated.
com Apple.IMessage.Bag.plist it lists only the last used Apple iMessages server.
However, there are these some .plist in ~/Library/Containers/com.apple.soagent/data/Library/Preferences which also play a role.
Note the location of the path bar across the bottom.
com.apple.messageshelper.FileTransferController.plist very probably watching the wick she holds a record of all the files and images sent to you, but in the hex names.
View of Xcode.
com Apple.quicklookconfig.plist doesn't seem to have relevant information.
The next would be the Preview but .plist which is as empty as the at a glance.
The real "live .plist lies in ~/Library/Containers/com.apple.Preview/Data/Library/Preferences , rather than having an Alias point in the folder ~/Library/Preferences.
That said, and after reviewing through it I see no reference to what applications it is allowed to work with.
This seems to be a question that involves 3 apps, look and preview Messages.
All have read and write routes through ~/Library/Containers and the file final storage ~/Library/preferences.
I am tempted to check the number of files that have lost your property and read and write permissions see this thread and useful item before the green marked resolved one. Reset Home Folder permissions and ACLs error (Linc offers first - marked text relatively useful, then a "Fix" that is the Green post resolved.
20:40 on Friday. May 6, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
Windows 7 SP1 and Firefox installed recently version 9.0.1. After having tired of the limitations of the opera.
At startup I get ~ 20 of these boxes on the desk of dialogue (or he repeats when I try to get rid of).-msconfig doesn't show any crap from Firefox on the Startup tab
-Fast Dial addon installed- -Windows Defender running
- -installed / ran WinPatrol to review the startup entries and I noticed of csrss.exe 4 associated with Windows Defender and 3 Audio programs
- -installed/ran Malwarebytes (w. definitions updated) and found Worm.Rebhip in 11 places, of which 4 have been associated to the above WinPatrol
- -license of Malwarebytes to remove and reboot needed.
NO error (s) on the desktop once started
-
SatPro A60 can hardly operate at 2.8 GHz since problem of thermal regulation
Hey guys, a nightmare for A60, its CPU clock can hardly run at 2800 MHz, it is supposed, since 75 of the A60? Thermal regulation time is too easy to access.
Using the processor RightMard and Mobilemeter clock utilities, I found the temprature entry A60 to thermal regulation 75? When this temperature is reached, cpu clock slow down up to 1500 MHz (you can't see it using the normal test program, because Throttling is like cheating... that is to say force CPU to stop for some time in order to avoid overheating), and when temperatures rise less than 70?, he will return to 2800 MHz. Another delay: the auto-off temperature is 85? for A60.
Although the temperature which got the Mobilemeter is the sink, not the CPU core temperature, it seems that oshiba made this 75? Date limit too low (default time of Intel is probably about 90?). In addition, with evil designed sink heater, the temperature remained generally above 70-80? with room temperature 15? and only some word processing or navigation base and also with the machine almost free of dust. All this means that the laptop can hardly run at 2.8 GHz. You could never have this speed in any graphical game.
The real clock must be test using RightMark clock, it allows to test if the CPU is forced to stop frequently due to thermal regulation. Everyone wants to do this experience can download these two free software of:
RMC(177Kb):
http://CPU.RightMark.org/download/rmclock_18_bin.rar
MobileMeter(40Kb):
http://www.geocities.co.jp/SiliconValley-Oakland/8259/release/0310/mm0310.zipwith SuperPI, who can make as high CPU temperature as you want opening it serval times at the same time
http://ftp15.ENET.com.CN:88/pub/system/sysanaly/SuperPi-8.zipFinally, my original idea to write about it here is not only to tell a truth, but also I want that people of Toshiba could do something on this issue, or do an updated bios updated to allow to off the thermal regulation, or make the deadline for her superior to only 75? ,
as you have about bios satellite 1805 last updated:Version 2.10 24/09/2002
A change has been made to allow only BIOS enable and disable the CPU limitation during the operation of Windows 98SE.Give the original CPU speed, because that's the only reason I and a few other people chose this machine.
Hi Al
Well, I put t know if you have experience in the technology of the laptop but heat is a known issue on all laptops. It s a fact that all the parts (Cpu, graphics card, etc.) in the unit produce a lot of heat and it s very difficult to cool these rooms because there is no place. You can't compare the computer laptop and desktop PC!
In addition, to protect against overheating of the CPU has an internal temperature sensor. (You know that) If the temperature of computer s reaches a certain level, the cooling fan is turned on or processing speed is lowered. You can choose to control the temperature of the CPU by the setting of the fan first, then if necessary, reduce the speed of the CPU.
Alternatively, by lowering the speed of the CPU first, then if necessary, turn the fan. You can use the element of the standard tab cooling method in Toshiba Power Saver.Here are the features:
Maximum performance: Turn on fan first, and then if necessary decreases the speed of the CPU processing.
Performance: Use a combination of fan and a decline in the processing speed of the CPU.
Optimized battery: Lowers the speed of the CPU first, then if necessary turns on the fan.In addition if the temperature of the CPU reaches an unacceptable level with two parameters, the system stops automatically to avoid any damage.
Hopefully this description can explain this problem.
Best regards
Maybe you are looking for
-
Hello! I was wondering, is it that any advice from people know to save the life of the battery? I just got a new phone and the battery is not at its best. Thank you! iOS 9.3.3
-
stopped printing, the error message saying there is not connected
do you have a reboot once (power supply is to unplug for 15 seconds) who worked for impressions of 1-2, then the same error again. bought the machine three days ago I need detailed help. Tried to get it from online contact, but made a mistake by ente
-
BlackBerry Smartphones to type uppercase on the Verizon Curve 8530?
Hi, does anyone know how to do this? someone with a model dif bberry told me to do the alt key then caps, but this does not work on my phone... Thank you!
-
Upgrade of windows 8 for windows 8.1 to more than one computer.
Hey! I use Windows 8 on a laptop, but also the PC. I want to update the two BONES. The only option available is through store but new download just means wasting time. Could you please suggest any alternative for this so that I can save a lot of time
-
How to convert the non - CBD CBD
HelloI recently updated my 11.2.0.2 test to 12.1.0.2 database. I did it using the manual method using perl script. I'm trying to convert the non - CBD CBD. But it fails with the following error.Can you please guide me where I am wrong? Connected to: