Operation failed. Validation of the backup task execution failed error message on startp
Title: backup original validation task execution failed
Receive message at next startup:
Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.
I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.
Hi BobBianconi,
(1) since when are you facing this problem?
(2) what backup program do you use?
It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.
The following steps can worth a try:
Method 1: Run the fixit available in the link below for common system maintenance tasks.
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.
Method 2: activate the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Tags: Windows
Similar Questions
-
Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell. I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return
Hello
1. when exactly you get this error message?
2 are you able to boot into the office after getting this error on blue screen?
3. don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps.
Method 1: Try to start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: If the problem persists, then try to run the Startup Repair tool.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
Hope this information is useful.
-
I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. »
then it is probably too old and incompatible.
-
When booting I get the Visual C++ runtime library error message
Hi ToddLynch,
(1) since when are you facing this problem?
(2) remember to make changes?
It is sufficient to indicate the complete error message you receive.
Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Apple has not renewed the contract with Google to access Google servers.
If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging. Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.
There is more support for iPhoto from Apple. You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
It is very likely. If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.
-
When I click on all the files I get an error message says "without this user interface supported 'n I can't open any files or folders.
A moderator is spent it to search in the Forum, the folders and files Windows of Feedback Forum.
HI, Luvnmidlife,
Windows operating system?
It is the unique user on the system account?
Create a new account to use for testing purposes. See if the problem persists using the new account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
-
Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:
\SYSTEM32\NTOSKRNL.exe is missing or damaged At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.
I am running Windows XP operating system.
Is there a solution for this?
Thank you
Hello
· What is the number and the model of the computer?
· What is the service pack installed on the computer?
Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477
-
Original title: irremediable failure?
Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF). I don't know how to solve this problem.
Hello
1 have had any changes made to your computer before this problem?
Please, try the following methods and check if it helps:
Method 1:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558/Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Hope this information is useful.
-
I have the seams to get an error message after instilling my saying of the Lightroom program: an internal error has occurred. :/
Hi alexish,
Greetings!
This problem occurs only when Lightroom can't access the folder Adobe due to lack of permissions for the folder you want.
Please see this thread an internal error occurred: failed assertion!
See Solution 5 in the link:- changing error modules
Let us know if this helps
Kind regards
~Assani
-
Adobe reader 11 installation fails. error message: there is an error install adobe reader. Adobe reader installation error. NULL. tried to use the cleaning of adobe tool. using XP sp3. seems that adobe 11 is not completely uninstalled. It is because when the software adobe reader 11 is deleted in Add/Remove program. When the pc is restarted, 11 entry of adobe reader returns but it's like the fake entry as not given the size. Please help to correctly install Adobe Reader 11. also tried:
1 uninstalled, rebooted, reinstalled 2. installed from different locations, 3. deleted adobe keys of
local machine and tried to install
You also have Acrobat installed? Acrobat is the creation of PDF files and Adobe editing tool.
Have you tried Microsoft Fixit tool?
-
I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
New error message to see article 871122
All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.Hello
1. you are using a wireless connection?
If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
http://support.Microsoft.com/kb/283658Also check this link for troubleshooting steps:
http://support.Microsoft.com/kb/314095It will be useful.
-
I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance
original title: where to find WIndows Poweershell?Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.
-
When I go to Windows Media player to listen to the music, I get an error message C00D11B1 how can I fix that I can play my music?
Hi SummerSolarez,
1. did you of recent changes on the computer?
2. This only happens when you try to play a specific type of file with all the files or music?
I suggest you to update your audio driver by following the steps in the link below and check if it helps.
Note: The steps are also applicable to Windows Vista Media Player.
Hope this information is useful.
-
When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?
This is a user forum. You don't talk about support from Adobe here.
- Install you CS5 on 2 computers but don't turn off a
- You have more access to other computers.
Contact Adobe customer service via Chat online with Activation.
Click on the blue again "need help?" button.
Nancy O.
Maybe you are looking for
-
I went to get in my "sent" box to check on an e-mail, but found that they had almost all been deleted. I have imap and pop3 accounts, but this has happened in both. Also happening in the Inbox. I am aware that I asked never to delete e-mails.
-
Import of Contacts from GMail to iCloud
I had a Samsung Android phone where all my phone contacts have been added and saved on my GMail account. On the purchase of my new iPhone 6 s more, all my phone contacts have been restored after adding my GMail account. I would like to move/import my
-
PCIe-6612, LabVIEW 2011. I want to directly route digital signal (up to 10 MHz) of a PFI (source PFI19) to another (PFI17). Routing table says that he will operate counter 7, which is already used in my application, so I have to route manually. What
-
error code 646 assigned to 7 updates from microsoft who fail to install again and again?
have tried to install updates 7 x more than 3 and always comes back as having failed with the error code 646. I restarted computer and now do not know what is wrong or what to do
-
Do not install Windows Update KB960803 KB905866 KB952004
3 all the patches in the title are for Vista x 64 based Systems, on my system, but the updates do not settle with the error code 80072F78. The screen shows tht 3.2 MB or 55% download competing before downloading the update fails. my system has 50%