No limitation on the number of subfolders under shared folders?

Similar Questions

• Are you limited the number of subfolders that can be added to a current folder within the document library?

  Original title: new folders

  Are you limited the number of subfolders that can be added to a current folder within the document library? I tried to add folders using the new folder tab and it will create not one. I hope I make this clear enough question. I'm not computer savy.  Thanks for your help.

  If you cannot create a new folder anywhere, this could apply.
   
   
  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

   

• Limitation on the number of components adf on a jsp page?

  I am currently working on a page that includes a number of components of af: table with the underlying components of af: column for each table. The page also contains other components of the adf. My question is as stated above, is there a limitation on the number of adf components that are allowed on a page and if so what is it?
  
  I found that I had page errors can be solved by reducing the number of components. For example, deleting components of af: objectspacer I'm able to include components of af: column that caused the page to fail.
  
  Any information would be appreciated.
  
  Thank you.

  What version are you on?

  We faced a similar problem in 10g. The project does not compile after that jspx exceeds a certain size.

  It is due to the restriction of code_length java class file, it cannot be greater than 64 k.

  Check this thread for detailed explanation and workaround {: identifier of the thread = 361086}

  We have been working around the issue by breaking large page in multi-page and that refer to using the home page:

  
  
  

  Mitesh.

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• Validation of DRM to restrict the number of nodes under a Parent

  Hi, I am creating a real-time validation, to limit the number of nodes under a parent to 1000. All new Member beyond 1000 should be erroneous outside. In order to achieve this, I created a property:

  VerParMemCount: String, node, derived

  Parameters: LessThanOrEqual (PropValue (Core.LeafChildren), 1000)

  This property was then used in the VerEssChldMemCountRT of Validation:

  Class: Property value is equivalent to the

  Level: node

  To check value: false

  Run this Validation: real-time batch and two

  When I test manually, it works. However in real time when I insert 1001 nodes or more from a parent, there is no notifications/errors. Any guidance how to do this job? DRM version: 11.1.2.1.107. Thanks in advance!

  Hello

  Please can you confirm - you have been assigned the validation to the level of hierarchy as the validation in real-time?

  Thank you

  Best regards

  Durai Gandhi

• How to count the number of nodes under each parent in any given xml

  How to count the number of nodes under each parent in any given xml. for example the xml below was
  books has 3 childern, library [1] has 4, [2] library has 6 and bookshop [3] has 2. is it possible to get the number of tags in a childnode duplicate IE library [1]
  Book1 Tagus repeated twice... vice versa. do we need to make plsql lie we can achieve through sql
  
  < book >
  < library >
  ABC < book1 > < / book1 >
  BCA < book2 > < / book2 >
  ACR < book1 > < / book1 >
  Lac < Book4 > < / Book4 >
  < / book >
  < library >
  ABC < book1 > < / book1 >
  BCA < book2 > < / book2 >
  ACR < book3 > < / book3 >
  ACR < book3 > < / book3 >
  tray of < bookn_1 > < / bookn_1 >
  adjusted cost base < bookn > < / bookn >
  < / book >
  < library >
  ABC < book1 > < / book1 >
  BCA < book2 > < / book2 >
  < / book >
  < / books >
  
  
  I tried this... query.
  
  Select
  XMLQUERY ('count($doc/Books/Bookstore[1]/descendant::*)' in the way of xmltype ("< books >
  < library >
  ABC < book1 > < / book1 >
  ACR < book1 > < / book1 >
  Lac < Book4 > < / Book4 >
  < / book >
  < library >
  ABC < book1 > < / book1 >
  BCA < book2 > < / book2 >
  < / book >
  (< / books > ')
  as 'doc' of happy return) .getNumberVal () as node_count
  of the double
  
  Select
  XMLQUERY ('count($doc/Books/descendant::*)' in the way of xmltype ("< books >
  < library >
  ABC < book1 > < / book1 >
  ACR < book1 > < / book1 >
  Lac < Book4 > < / Book4 >
  < / book >
  < library >
  ABC < book1 > < / book1 >
  BCA < book2 > < / book2 >
  < / book >
  (< / books > ')
  as 'doc' of happy return) .getNumberVal () as node_count
  of the double
  
  How can I get the counts for each parent in a single query
  
  Published by: user7955917 on August 24, 2012 07:26

  Generic function how you want the query to be.

  If the structure is known in advance, as in your example a 'books' and then a 'library' root element, it's as simple as:

  SQL> select x1.parent_id, x2.child_name, count(*)
    2  from tmp_xml t
    3     , xmltable(
    4         '/books/bookstore'
    5         passing t.object_value
    6         columns parent_id   for ordinality
    7               , child_list  xmltype path '*'
    8       ) x1
    9     , xmltable(
   10         '/*'
   11         passing x1.child_list
   12         columns child_name varchar2(30) path 'name()'
   13       ) x2
   14  group by x1.parent_id, x2.child_name
   15  order by x1.parent_id, x2.child_name
   16  ;
  
   PARENT_ID CHILD_NAME                       COUNT(*)
  ---------- ------------------------------ ----------
           1 book1                                   2
           1 book2                                   1
           1 book4                                   1
           2 bookn                                   1
           2 bookn_1                                 1
           2 book1                                   1
           2 book2                                   1
           2 book3                                   2
           3 book1                                   1
           3 book2                                   1
  
  10 rows selected
   
  

  If you want a generic solution that works without knowledge of the structure, you will need a recursive approach, and most importantly, you should know which nodes in distinct, I suppose that the leafs?

  Also, please help if you can provide the link of reference on the function name() years what are the other expression, that I can use after the path

  You can start reading the documentation: http://docs.oracle.com/cd/E11882_01/appdev.112/e23094/xdb_xquery.htm#CBAGCBGJ

  The clause PATH expects a XQuery expression however before 11.2, we can put only simple XPath expressions.

• Does anyone know if you are limited in the number of characters in the text field?

  I have the scrolling text of the distant rear side right up to the edge on the left front. I only get to halfway through the message of full text and letters are mixed at the any end. is there a limit on the number of characters I can use? Is there a setting a limitation I can increase?

  It seems to be. I figured it at approximately 16000 characters more or less (or even lower). (Estimated from the original character TextEdit limit as it seems to be this type of core service text text handling in movement and FCPX.)  I drew this conclusion during the development of a method to create a movement subtitles. It finally turned out that I had to cut the scripts into pieces 'chapter of size' to keep the character countdown. I never got to finish this tutorial and it has been quite some time now (and I can't not find my notes on the subject). It could be that the number of characters estimated is actually lower.

  There is no way to reset the limit.

• Limitation with the number of entries in a Tunnel of Split ACL

  Hey Cisco community!

  I am facing a problem with a Cisco hub and spoke to the solution.

  We have 2 Hubs (Cisco 7200-2 for redudancy). All clients have a RADIUS (Cisco 881). The rays are 24/24 reported the 2 hubs (2 dmvpn tunnel) to give us access to our monitoring and support equipment.

  Each talk have a NAT table with a specific NAT range for each talk. That way, we can reach every devices with a single IP address within the VPN.

  For example:

  -Spoke_001 have a range of IP NAT 10.80.0.0 255.255.254.0

  -Spoke_002 have a range of IP NAT 10.80.2.0 255.255.254.0

  ...

  To connect to hubs with our mobile phones, we use the Cisco VPN client. We have different profiles created in the regional centres:

  -Profile Admin with an ACL that allow connectivity with each talk

  -Integrator profiles: which allow connectivity to an integrator to some defined rays.

  So the integrating profile looks like this in the hub

  Configuration group customer crypto isakmp [NAME]

  Touch [password]

  [domain]

  pool [NAME]

  ACL [NAME_VPN_Split]

  !

  Profile of crypto isakmp [NAME]

  Profile of clients VPN Description Group [NAME]

  identity group match [NAME]

  list of authentication of client VPN_Client_AUTHEN

  VPN_Client_AUTHOR of ISAKMP authorization list.

  client configuration address respond

  IP local pool [NAME]...

  And the relationship of this group access list:

  [NAME_VPN_Split] extended IP access list

  IP 10.82.20.0 allow 0.0.1.255 all

  IP 10.82.24.0 allow 0.0.1.255 all

  IP 10.81.238.0 allow 0.0.1.255 all

  IP 10.82.4.0 allow 0.0.1.255 all

  IP 10.82.44.0 allow 0.0.1.255 all

  IP 10.81.242.0 allow 0.0.1.255 all

  ...

  In the access list, we can modify the subnets to reduce the number of entries, but some groups should have access to a spoke with the NAT IP range that we can summarize in 1 line (see example)

  The question we have is: when we have more than 50 entries in the ACL, 51st entry does not work:

  -Customer VPN does not receive the road to this network, the road is not added on the connected PC

  -Even if the road is added manually on the PC, the 51st network ACL is not accessible.

  Do you know why there is a limit of 50 entries in a tunnel "Split ACL?

  Do you know if there is a solution to avoid this problem?

  The problem is that if we can summarize an ACL in less than 50 lines, we will have to create a second profile and know wich one to use for the network that... Not really a good solution.

  Thanks in advance!

  Version:

  ROM: System Bootstrap, T3 Version 12.3 (4r), RELEASE SOFTWARE (fc1)

  BOOTLDR: 7200 (C7200-KBOOT-M), Version 12.3 software (15), VERSION of the SOFTWARE (fc3)

  System image file is "disk2:c7200 - advsecurityk9 - mz.151 - 4.M2.bin.

  Yes, there is a strict limit of 50 split tunnel ACL entries when you set it by using the old-fashioned way of VPN configuration (ie: card crypto).

  If you use dynamic TIV to configure, then you have no limitation for ACL split tunnel.

  Here is an example configuration for dynamic configuration of VTI:

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_vpnips/configuration/15-Mt/sec-IPSec-virt-tunnl.html#GUID-E9EB4518-6269-42E8-908C-57BA5D6334A5

  Hope that answers your question.

• Increase the number of machines under license to use Adobe CC

  Hello

  We need to increase the number of machines that our license allows 2 to 3. I can't find any option to do this in the parameters of belonging - is anyone able to direct me to a place that I can do this?

  Thank you

  Brett

  Cloud creation help / creative cloud to teams

  https://helpx.Adobe.com/in/creative-cloud/creative-cloud-teams.html

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• What is the limitation of the number of replicas that need a provider?

  Hello

  What is the maximum number of replication agreements that we can configure a provider Multi master topology?

  Thank you.

  Bhadra,

  The number of replicas by impact shows/latency of the replication hub.

  In your case, each replica is probably related to both poles (to avoid the single point of failure), so each concentrator must manage 20 replicas. It is quite

  an important number and can introduce delays into reruns of Scripture. You can monitor replication delays using insync - 11 g Release 1 (11.1.1.7.0)

  If possible, it would be better to add more 2 hubs and connect each replica to 2 hubs, so that each hub has only 10 lines to manage.

  -Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• If I download files using Adobe Acrobat Pro DC, what are the limits on the number of downloads? I publish a set of PDF files every 3 months to about 1600 people. Is that allowed with this product, or should I register for something else?

  I need an affordable way to deliver a 20-20 MB of files PDF zip file every three months to about 1600 people. What program to do this? Load on the storage of Adobe site and then use an e-mail program to send the link to the recipients?

  Hello

  There is no limit to the number of downloads of a file shared on Adobe Document cloud. Please don't forget to create an anonymous link using 'Send & Track' app, and which can be shared with the participants as much as you want.

  Thank you!

• Y at - it no limitation for the number of end users

  Hi guys,.
  
  Is there a limit to the number the end users?
  
  Which is only based on the specifications of the server and editing of Oracle. Is this true?
  
  Kind regards
  Fateh

  Fateh says:
  Thanks, Justin.

  I use only 11g xe. I have no idea about licensing of users.

  Oracle Database Express Edition licenses information® 11 g Release 2 (11.2), see especially the section "license fees". Oracle 11g Express Edition has no restrictions based on the number of users.

  See also Oracle Technology Network Developer for Oracle Database Express Edition license terms.

  However, as I have received from you:
  Suppose I have a license for 25 users:
  Then I will use three of them for:
  APEX_PUBLIC_USER
  FLOWS_FILES
  APEX_040100
  For my application, I can create unlimited number of users.
  Is this true?

  No 'Users' in the conditions of licence does not refer to database schemas (alias database users ). You can create as many databases of patterns you want.

  'Users' in the conditions of licence refer to real human users. For editions other than XE Oracle database, you can have named user licenses or processor of licenses. Username licenses require that you know exactly who is using the software, for example a user named for 5 users license allows Alice, Bob, Carlos, Dave and Fateh to use the database and applications based on it. Of course, for most practical purposes with internet/intranet applications developed using APEX you don't know who is using them. (For some applications internet you want as many people as possible to use). In these cases based processor licenses based on the specifications of the hardware used to run the application is the norm. As the material capacity should increase the load on the system, it is supposed to scale with the number of users (anonymous). Processor licenses are so much more expensive than the username.

• Update resulted today in count of the number of messages in different folders disappear, except new

  I was asked to update to Thunderbird and did, when I came back later in the afternoon, the messages were always in each folder (sent for example), but the count of the number of messages in each category had disappeared.

  What about the small thing square on the line with the name above the part of the file. He has options for/unread and size

• How to find the number of column under Basic forms

  Hi all
  
  There is the serial number in the pay_assignment_actions Table column
  Through basic shapes where can I find the serial number column
  Is someone can you please tell me what would be the navigation.
  
  Thanks in advance

  You need to check the correct recording-
  It would be visible only for those guys-

  Void Payment
  Ext/Manual payment
  Cheque writer
  Magnetic report
  

• Limitation on the number of Destinations in a PDF document

  What is the limit of the Destinations that can be created in a PDF using Acrobat?  We noticed that after a number of destinations additional, older ones are deleted.  How can we stop this, or what is the limit?

  I just watched a PDF with more 10 000 destinations. There should not be a limit.