Limitation on the number of Destinations in a PDF document

Similar Questions

• Is there a way to limit the number of prints to a PDF through security features?

  I've searched and searched, with no response, so I think there is no way to do it. But until I asked, I'll never know.

  The publishing and media company that I work creates reprints of articles for our magazine customers. Generally, they are printed through our printer and delivered to the customer in the amount that they ordered. Asked me to see if it would be possible to limit the number of prints to a PDF document which would be sent to the same customer. Then they can print the document on their own (on a desktop printer or local), but only to the amount bought it (that is to say-200, 250, 500, 1000, etc.). I know that print, edit, copy, and save functions can be disabled through the security in Acrobat, but a certain amount of maximum print can be defined? And then once it is printed to this quantity, the disabled PDF?

  I'm guessing that the answer is no, for several reasons that I can think of, but not bother to mention to keep this short.

  Your assistance in this matter is greatly appreciated.

  Thank you!

  Which does not limit the amount.

  As I said, you would need a digital rights for this management solution.

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• Limitation on the number of components adf on a jsp page?

  I am currently working on a page that includes a number of components of af: table with the underlying components of af: column for each table. The page also contains other components of the adf. My question is as stated above, is there a limitation on the number of adf components that are allowed on a page and if so what is it?
  
  I found that I had page errors can be solved by reducing the number of components. For example, deleting components of af: objectspacer I'm able to include components of af: column that caused the page to fail.
  
  Any information would be appreciated.
  
  Thank you.

  What version are you on?

  We faced a similar problem in 10g. The project does not compile after that jspx exceeds a certain size.

  It is due to the restriction of code_length java class file, it cannot be greater than 64 k.

  Check this thread for detailed explanation and workaround {: identifier of the thread = 361086}

  We have been working around the issue by breaking large page in multi-page and that refer to using the home page:

  
  
  

  Mitesh.

• What is the maximum number of supported in a PDF document hyperlinks?

  What is the maximum number of supported in a PDF document hyperlinks?

  How will I know how many hyperlinks, there is in a PDF document?

  There is no limit per document. Links (with hyperlinks to URLS) are not stored all together, but stored for each page. There is no limit per page either but I would begin to worry about performance if there is more than 100 per page.

  Just for fun, I checked how many links there are in the PDF file, I use most often (of about 6000 pages). ; There are 52 000 links inside.

• Count the number of comments in a PDF automatically?

  Hello O Experts,

  My documentation team members use Acrobat and Reader 8 and often need to count the number of comments in a PDF file. Is it possible to count the number of comments automatically? We cannot find this feature anywhere and resorting to the manual count. Because PDF documents can contain thousands of comments, it's very tedious. I tried to search the Web and these forums, but the words 'count' and 'comments' are too frequent in other contexts to find something useful...

  Thank you and best regards,

  -M.T.

  Just thought of another potential idea, that you can try if you use Sticky Notes.

  Do a search for Adobe on the generated summary of comments PDF to Word reminder and you will quickly see the number of instances in the document.

  sypark

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• Does anyone know if you are limited in the number of characters in the text field?

  I have the scrolling text of the distant rear side right up to the edge on the left front. I only get to halfway through the message of full text and letters are mixed at the any end. is there a limit on the number of characters I can use? Is there a setting a limitation I can increase?

  It seems to be. I figured it at approximately 16000 characters more or less (or even lower). (Estimated from the original character TextEdit limit as it seems to be this type of core service text text handling in movement and FCPX.)  I drew this conclusion during the development of a method to create a movement subtitles. It finally turned out that I had to cut the scripts into pieces 'chapter of size' to keep the character countdown. I never got to finish this tutorial and it has been quite some time now (and I can't not find my notes on the subject). It could be that the number of characters estimated is actually lower.

  There is no way to reset the limit.

• Limitation with the number of entries in a Tunnel of Split ACL

  Hey Cisco community!

  I am facing a problem with a Cisco hub and spoke to the solution.

  We have 2 Hubs (Cisco 7200-2 for redudancy). All clients have a RADIUS (Cisco 881). The rays are 24/24 reported the 2 hubs (2 dmvpn tunnel) to give us access to our monitoring and support equipment.

  Each talk have a NAT table with a specific NAT range for each talk. That way, we can reach every devices with a single IP address within the VPN.

  For example:

  -Spoke_001 have a range of IP NAT 10.80.0.0 255.255.254.0

  -Spoke_002 have a range of IP NAT 10.80.2.0 255.255.254.0

  ...

  To connect to hubs with our mobile phones, we use the Cisco VPN client. We have different profiles created in the regional centres:

  -Profile Admin with an ACL that allow connectivity with each talk

  -Integrator profiles: which allow connectivity to an integrator to some defined rays.

  So the integrating profile looks like this in the hub

  Configuration group customer crypto isakmp [NAME]

  Touch [password]

  [domain]

  pool [NAME]

  ACL [NAME_VPN_Split]

  !

  Profile of crypto isakmp [NAME]

  Profile of clients VPN Description Group [NAME]

  identity group match [NAME]

  list of authentication of client VPN_Client_AUTHEN

  VPN_Client_AUTHOR of ISAKMP authorization list.

  client configuration address respond

  IP local pool [NAME]...

  And the relationship of this group access list:

  [NAME_VPN_Split] extended IP access list

  IP 10.82.20.0 allow 0.0.1.255 all

  IP 10.82.24.0 allow 0.0.1.255 all

  IP 10.81.238.0 allow 0.0.1.255 all

  IP 10.82.4.0 allow 0.0.1.255 all

  IP 10.82.44.0 allow 0.0.1.255 all

  IP 10.81.242.0 allow 0.0.1.255 all

  ...

  In the access list, we can modify the subnets to reduce the number of entries, but some groups should have access to a spoke with the NAT IP range that we can summarize in 1 line (see example)

  The question we have is: when we have more than 50 entries in the ACL, 51st entry does not work:

  -Customer VPN does not receive the road to this network, the road is not added on the connected PC

  -Even if the road is added manually on the PC, the 51st network ACL is not accessible.

  Do you know why there is a limit of 50 entries in a tunnel "Split ACL?

  Do you know if there is a solution to avoid this problem?

  The problem is that if we can summarize an ACL in less than 50 lines, we will have to create a second profile and know wich one to use for the network that... Not really a good solution.

  Thanks in advance!

  Version:

  ROM: System Bootstrap, T3 Version 12.3 (4r), RELEASE SOFTWARE (fc1)

  BOOTLDR: 7200 (C7200-KBOOT-M), Version 12.3 software (15), VERSION of the SOFTWARE (fc3)

  System image file is "disk2:c7200 - advsecurityk9 - mz.151 - 4.M2.bin.

  Yes, there is a strict limit of 50 split tunnel ACL entries when you set it by using the old-fashioned way of VPN configuration (ie: card crypto).

  If you use dynamic TIV to configure, then you have no limitation for ACL split tunnel.

  Here is an example configuration for dynamic configuration of VTI:

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_vpnips/configuration/15-Mt/sec-IPSec-virt-tunnl.html#GUID-E9EB4518-6269-42E8-908C-57BA5D6334A5

  Hope that answers your question.

• No limitation on the number of subfolders under shared folders?

  Hi all
  
  We receive requests for groups of users who want to group records and wanted to check to see if anyone has come across limits number subfolders under shared folders?
  
  Thank you.

  His is more on the limitation of the operating system.
  Visit this link
  http://docs.Oracle.com/CD/E21764_01/bi.1111/e10541/prescatadmin.htm#BAJBJIGA

  If brand pls help

• What is the limitation of the number of replicas that need a provider?

  Hello

  What is the maximum number of replication agreements that we can configure a provider Multi master topology?

  Thank you.

  Bhadra,

  The number of replicas by impact shows/latency of the replication hub.

  In your case, each replica is probably related to both poles (to avoid the single point of failure), so each concentrator must manage 20 replicas. It is quite

  an important number and can introduce delays into reruns of Scripture. You can monitor replication delays using insync - 11 g Release 1 (11.1.1.7.0)

  If possible, it would be better to add more 2 hubs and connect each replica to 2 hubs, so that each hub has only 10 lines to manage.

  -Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• If I download files using Adobe Acrobat Pro DC, what are the limits on the number of downloads? I publish a set of PDF files every 3 months to about 1600 people. Is that allowed with this product, or should I register for something else?

  I need an affordable way to deliver a 20-20 MB of files PDF zip file every three months to about 1600 people. What program to do this? Load on the storage of Adobe site and then use an e-mail program to send the link to the recipients?

  Hello

  There is no limit to the number of downloads of a file shared on Adobe Document cloud. Please don't forget to create an anonymous link using 'Send & Track' app, and which can be shared with the participants as much as you want.

  Thank you!

• Y at - it no limitation for the number of end users

  Hi guys,.
  
  Is there a limit to the number the end users?
  
  Which is only based on the specifications of the server and editing of Oracle. Is this true?
  
  Kind regards
  Fateh

  Fateh says:
  Thanks, Justin.

  I use only 11g xe. I have no idea about licensing of users.

  Oracle Database Express Edition licenses information® 11 g Release 2 (11.2), see especially the section "license fees". Oracle 11g Express Edition has no restrictions based on the number of users.

  See also Oracle Technology Network Developer for Oracle Database Express Edition license terms.

  However, as I have received from you:
  Suppose I have a license for 25 users:
  Then I will use three of them for:
  APEX_PUBLIC_USER
  FLOWS_FILES
  APEX_040100
  For my application, I can create unlimited number of users.
  Is this true?

  No 'Users' in the conditions of licence does not refer to database schemas (alias database users ). You can create as many databases of patterns you want.

  'Users' in the conditions of licence refer to real human users. For editions other than XE Oracle database, you can have named user licenses or processor of licenses. Username licenses require that you know exactly who is using the software, for example a user named for 5 users license allows Alice, Bob, Carlos, Dave and Fateh to use the database and applications based on it. Of course, for most practical purposes with internet/intranet applications developed using APEX you don't know who is using them. (For some applications internet you want as many people as possible to use). In these cases based processor licenses based on the specifications of the hardware used to run the application is the norm. As the material capacity should increase the load on the system, it is supposed to scale with the number of users (anonymous). Processor licenses are so much more expensive than the username.

• How to determine the number of characters in a PDF file?

  Acrobat.com, how to determine the number of characters or words in a PDF file?

  Hi unk2,

  There is no feature in Acrobat.com online services to a number of characters. But, you could use ExportPDF to convert your PDF files to Word format and then create your character count in Word.

  Please let us know if you need help.

  Best,

  Sara

• determine the number of pages of a pdf prior to any operation on it

  Any of you know how to determine the number of pages in the pdf file (selected with the Open for example)?

  Somehow, I can't understand how to do that any way short of actually opening/pixelation all pages without prior knowledge of the actual number.

  I would like to use this information to determine the number of items to a contact-sheet-like procedure beforehand.

  MultiPageImporter2.0.jsx, which is an Indesign Script by Scott Zanelli, obviously the fact, but so far I have failed to properly use its functions.

  Anyway, have a good weekend

  pfaffenbichler

  OK, now it works...

  Install x script changing the CSx version

  Then run this script by changing the location of pdf and the version of CS... (NB: does not work with CS2.) CS, CS3, and CS4 should be ok)

  /////////////////////////////////////////////////////////////

  var pdffile = file ("~/Desktop/56 pages.pdf") .fsName;

  ////////////////////////////////////////////////////////////

  var file = new File ("/ Applications/Adobe Photoshop CS3/Presets/Scripts/macexec.app/contents/macexec");

  var pdfcnt = File ("~/pdfcnt");

  If (pdfcnt. Exists) pdfcnt.remove ();

  {if (file. Exists)}

  leader. Open ("e");

  leader. Encoding = "BINARY";

  leader. Write ("/ usr/bin/LDM - name kMDItemNumberOfPages");

  leader. Write ("\""+pdffile+"\"|/usr/bin/grep o [0-9]------+ $ > pdfcnt \n");

  The following line closes all Windows Terminal.

  file.writeln ("/ usr/bin/osascript - e ' tell \"Terminal\ request "to quit" ");

  leader. Close();

  }

  leader. Execute();

  var test = false;

  {while (test)}

  if test (pdfcnt.exist) = true;

  $.sleep (50);

  }

  for (var t = 0; t)<>

  If (pdfcnt. Length > 0) break;

  $.sleep (50);

  }

  pdfcnt. Open ("r");

  var number = parseInt (pdfcnt.readln ());

  pdfcnt. Close();

  Alert ("number of pages in" pdffile + "=" + count);