Limits the user submitted Web Apps

Similar Questions

• How can I turn off the answering machine on the editing forms web app?

  I was able to easily find information on deactivation of autoresponders of web form, but it does not work on web applications.  Can someone tell me how I would do the same thing with the editing forms web app?

  Thank you
  Brian

  HI Brian,.

  Email notification cannot be removed the creation of point form web app. Only standard web forms.

  See you soon,.

  -mario

• Internal error during the installation of DirectX for the user final web runtime install

  Hi all

  I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
  I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
  I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
  "An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
  I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
  I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
  Thanks for your help.

  While Win7 installed DX 9, 10 and 11 it does not install with all files.
  d3dx9_43.dll is the latest DX 9 files.
  The best method when you have not already updated DX is to use the DX Web Installer,.
  then you can try using them.
  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
  and try to run the installation program from there Web DX.

  -L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
  is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
  DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
  DX files.
  -Similarly, you can use Safe Mode (networking not required that you have all files) may
  be used when there is a problem installing DX with the complete installation program.

  -When there is a corrupted file of DX and you get the name of this file, an error, as with
  your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
  Windows) and when you run the Web Installer will replace the now "missing" with a new file
  copy.

  Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
  install the DX.
  This could be due to UAC settings too high, does not not as administrator or another
  restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
  Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
  next to the race... as an administrator.
  .

  .

• Passage of thanks VM SATA drives? (update: a bug in the user interface web host)

  I use ESXi 6.0 for private home use and am currently building a NAS with him (on top of ESXi OpenMediaVault). However, as I am using only material quality consumer, my SATA controller does normally not for raw device mapping. I added the raw device manually in accordance with VMware KB: Raw Device Mapping for the local storage but when I try to join the top device (via the file on the local data store) a virtual machine, the user interface gives me an error message indicating that the capacity is too large for the given data store (of course, the system disk is much smaller than the data disks).

  Is there a way I can still add raw devices to virtual machines?

  Another update: upgrading the client to the web user interface host to 3731936 seems to fix this problem. I can now add virtual disks as RDMs in the web client.

• In - App purchase Extension Native - how can I check if the user purchased in-app already?

  Hello!

  I have an application with In - app purchase. I use ProductStore - native extension of Adobe to connect to iTunes (summary com.adobe.ane.productStore). I can make the purchase at the ENA, but I have not found a way to check if the application was already purchased: I need for the case when the user wants to install the application to an additional device, or if the user has delete the app and install it again.

  And if there is no way, maybe someone knows another Native extension that can provide the corresponding functionality.

  Thank you in advance,

  Olga

  One you use has a restore function: http://www.adobe.com/devnet-docs/gamingsdk/anedocs/com/adobe/ane/productStore/ProductStore .html #restoreTransactions)

• How to create the ability to zoom in on the user of Web site documents in Dreamweaver?

  Hello

  I don't know if this question has been posted yet or not, but my boss wants me to include documents scanned in old in Dreamweaver files and allow the user to zoom in on documents... What is the best way to do it? I thought that maybe having the download as PDF documents, but he wants them to be able to zoom in on the documents on the site itself, so that the user doesn't have to download lots of PDF documents. I'm sure there's an easy way, I do not know...

  Thanks for any help!

  Neva

  It is already integrated in browsers.  Just click on view > text size > increase or Ctrl +++

  You can use a script to switch to style sheet with 3 or 4 style sheets to achieve a similar effect.  I have a demo of this work below. (see the page source to see the code)

  http://ALT-Web.com/templates/variable_width.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Y at - it all means limiting the number of WebApps supports a user?

  Support said it is not an option to limit the memory WebApp. Does anyone know of a way around this?

  I wish that my users have a maximum of 5 presentations of webapp. I want also to another web application to allow only one presentation per account.

  Can someone help me?

  Evan

  You can do it with javascript and cookies.

  OR

  The best method is using liquid to check and hide/show based on this info.

  See this discussion: limit user submitted Web Apps

• Presentation Web App notifications

  I would like to than system administrators (or user specific admin) to receive an email notification every time that a user submitted web app element is executed. I don't want to require the approval of the content well. Is it possible to assign a workflow or send a notification by email once a user has completed a form of web application?

  Thank you!

  Josiah

  Assign a lead role.

  I don't know if the notification will be requires an approval is not checked so. You will need to test this.

• Allow the user to change the items in web application that they have not submitted

  Is there a way to allow a user to change/remove the elements of web app that they have not submitted?

  I did more than 400 pieces for the user via a .csv spreadsheet. I want the user to be able to change or remove these via an editing page of web app, I'll set up, but because I downloaded the .csv file, apparently, that another user cannot do this.

  At present, the only way that I know that this is so by the user submitting each element individually.

  Anyone know of a way to attribute everything to this user as if what he presented to them? Perhaps via the .csv file?

  Yes. In admin, you can change each element of WebApp to be attributed to a customer with the "presented by" in the section 'other Options '.

  You can also import/export this value, but in the CSV file, it is labeled as 'EntityId' - and you must use the system ID/ID of the entity of the client here.

  Otherwise, to allow anyone (who is connected) to change any element of WebApp, you must change the setting in the configuration of this WebApp by checking the option "anyone can edit items.

• Submitted clients Web App with profiles of customers with categories

  How would everyone on the creation of a Web site where customers could submit web app where the customers have a public profile that shows all of their memories, web app?

  My first thought would be to create web applications 2: a customer introduced web app points and the second for customers to create their own profile. The trick would be limiting only the profile web app for communication by the customer and list all their bids to point web app in their profile. For the client the web profile app it's because (as I'm sure most of you know) that the CRM information is not visible publicly.

  It seems that the only way to do it is to create a category for every single customer and then assign the category to each individual web app submitted by the client. It seems that there is a lot of work of the Chief Executive and perhaps some confusion.

  Is there a way to capture client web app profile ID and possibly use the item form in a hidden field on the present client web app to enable them to classify it themselves? I think the best way would be for them to do, but without being able to classify their submission under another customer accidentally.

  Is there a best way anyone has found to do this?

  Actually, on second look this Kiyuco.com tutorial only covers that allow members to change their elements of web application in a secure area, not not to view them as part of a public profile.  You should find what you are after in this forum thread I posted - Nicole de BCGurus described a good solution.

• The use of tags in the web app page point thanks to a model

  Hey guys, I'm having a problem here. I have the list on my list of web app so that a user can click to go to the landing page the selected items. I created a template for the landing page web app. The problem is that in my template I {tag_whatever} on the page and all relevant tags for that particular item. For some reason, the BC does not render the tag. Oddly enough, it is not also make a {module_loggedIn} tag that is on this page. I don't know what to do here. I need people to click on the name of the item web app and then land on a page that shows the rest of the web content of the app element. How should I proceed? Thank you all!

  Damien

  P. S.

  Web Apps landing page, I mean the URL that is generated for each individual part of web app. Thank you!

  Tags render only part of British Colombia he is part of. Tags of web app only make layouts of web app.

  If you choose a model for a web application element which will not include these tags.

  You need to apply labels and manage layouts of the web application itself. You have the list, the list view backup and detail and can also create your own layouts extra list as well.

  In regard to the tag module that you listed there. This isn't the right module and why it won't be rendered. It's - {module_isloggedin}

  For a web app list view that you do not create a page for this, you use its great layout. You use the tags associated with this layout, and then you create the HTML for this page layout and add the tags in there.

• Let the classification of customers submit Web App point

  Hello

  I know it is probably not a standard thing but is there a work around to let the customers to classify the elements of web app they submit. I am aware of the ability to clasify the console administration for users.

  Thank you

  Hi Gavin

  You can use this:

  lines = "4" multiple = "multiple">

  {module_categorylist}

  Gregory

• Restart the process from another App Engine user

  I am a DBA and I want to restart and engine of the user process final app whose execution is unsuccessful. I have the process scheduler administrator and PeopleSoft administrator roles, however I still cannot restart AE.

  What other guarantees is needed for this?

  Based on your response, I'll assume that you also have some knowledge of the application (which may not be not DBA).  Since you ask, I'll also assume that the reboot option button is not available in the process monitor.

  You should not have other roles.

  What happens if you try to restart it from the command line?

• search form Web apps: how to retrieve the value of the data-source type field

  Hello

  My question is:

  How can I retrieve the value of the source field of a web - app data-types when you insert the "form web search apps" on a web page.

  I have a web application that contains fields from the data source of the type. These fields to recover the (data) value of the 'web app' - 'elements of the field' field of another web application.

  When I insert the form

  Web apps

  Web apps-search form

  Name of the Web application

  It displays the fields with the field (ie. string, number) types other than type of field 'data source '.

  (Note: in the mode 'model of list' module of data tags, the fields of the data source are visible).

  What other (alternative) possibilities are there to create a search form?

  Thanks for your help.

  Kind regards

  Carla

  By chance, I came up with this workaround. Of course there are other methods to get your data from a web - app, but if you want to use the 'Web apps search form', it would be a workaround.

  I noticed that the "Web apps entry form" contains all the fields of web applications for your web application (including the fields of the data source).

  It is possible to add the fields to the form of the "Web apps entry form" in the «Web apps search form»

  If you insert the "Web apps entry form" on a blank page, you will see all the fields in your web App including the "data source fields. The names of form fields contain something like.

  "

  If you copy the form field desired (containing the "CAT_Custom_number"), you can paste it on the page in the form where the "web app search form" is inserted.

  In short:

  1. Add the "Web apps entry form" form on the blank page

  2. Select & copy the form fields that contains the 'web app data source field' and its value

  3. Add the "apps Web search form" on page (empty)

  4 paste the items copied from step 3 in the "Web apps search form»

  5. structure of the form with the fields you want, including the SEND/SUBMIT button

  6 structure and style of the search with your own HTML and CSS form

  7. test the form

  Krgds, Carla

• List of activities related to the category of items web app

  OK, I have a web application with a list of stores and into the details of these web app components im trying to get a list of events for the individual store.

  What I came up with is this code in my store web app in detail

  <! - store events - >

  {module_booking = 'class' itemId =' filter58777"'StoresEvents' =' model collection =" "}

  < section class = "page-section-3 bg-faded" >

  < div class = "container" >

  < h2 class = "title of section m-b-1" > next events store < / h2 >

  < div class = "row" >

  < div class = "col-xs-12" >

  < h5 class'm-t-2' = > Sunday, January 24, 2016 < / h5 >

  < div class = "list-group" > {% for article on StoresEvents.items-%} < a href = "#" class = "list-group-item-bg-faded" >

  < div class = "row" >

  < div class = "col-md-2" >

  < h6 class = "list-group-point-topic" > < strong > 13:00-14:00 < facilities > < / h6 >

  < / div >

  < div class = "col-md-8" >

  < h5 class 'list-group-point-topic' = > {{item.name}} < / h5 >

  < div class = "list-group-point-text" > {{item.body | truncate: 200}} < / div >

  < / div >

  < div class = "text-xs-right col-md-2 p-t-1" > {% if percentfull == '100'-%}

  < button type = "button" class = "btn, btn-default off" > Full < / button >

  {%-%}

  < button type = "button" class = 'btn, btn - sm btn-primary' > reserve < / button >

  {% endif} < / div >

  < / div >

  < /a > {endfor %} < / div >}

  < / div >

  < / div >

  < / div >

  < / section >

  This modules itemid is a category that I created which is the name of the store (albany Cove).

  My attempt at this was that I created categories of store names.

  Created a few events for each store and categorize the event to their store name.

  Then, I created this module over a list of events by category...

  and now im stuck... I tried to classify the item the store web app in the same category in the hope that it would give me the link itemid I need to load that stores the events.

  {module_booking filter = 'class' itemId ="{{categoryID}}" "StoresEvents" =' model collection = ""}

  Not sure if im going in the right direction with this one, any help would be greatly appreciated.

  Thank you

  Luke

  IDs do not match like that for different articles.

  ItemId is not the itemid as your assumption, it is for the id of ranking.

  ItemId = "/ classification/subclassifation ' is also valid.

  If you have a web application and a class event the same then display Details of the event or web app you will have its ID classification BUT for the classification of the views list isn't out by BC so you can not do what you're trying to do in the list view page layouts.

  If you have more then one element classified at the same, this also does not work as the classification output returns multiple ID (123892,124413,234234)