Line numbers in the table in a calculated text field

How calculated script works incrementally number a field calculated and return the number of lines in the field of the extreme left of a table?

What I need, is that each row in the table is numbered consecutively in the area of the far left and that the new created lines are numbered correctly at the end of the user.

Hello

You have to move the script to the layout event: loan. This isn't the most effective event, because it triggers every time changes. For this reason however your needs well, because whenever a row is added or deleted, the index numbers will be updated.

Here is an example letter (for a maximum of four lines). The same approach should apply to numbers. The script is located in the layout event: loan of the first cell.

There is an example here: https://acrobat.com/#d=Zk2XWWDUWNfG * VuRTNy5QQ

Good luck

Niall

Tags: Adobe LiveCycle

Similar Questions

  • Line numbers in the text

    Hello world

    I am building a Web site for former analysis University poems and letters. I need to add the line numbers in the text of the poems/letters I display - it works fine in Word, but I do not know how to apply line numbers in Dreamweaver. I'd be keen to set up as a CSS style, but I'm not really sure where to start. Any tips?

    Thank you
    Ness

    Not wide. Close actually.

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    ==================

    "Joe Makowiec" wrote in message
    News:[email protected]...
    > October 23, 2008 in macromedia.dreamweaver, Murray * ACE * has written:
    >
    > Do you know if it is possible to use CSS to design?
    >>
    > Is not what CSS.
    >
    > Actually:
    >
    > http://www.w3.org/TR/CSS21/generate.html
    >
    > I'm not sure how wide browser support is still, though.
    >
    > --
    > Joe Makowiec
    > http://makowiec.net/
    > Email: http://makowiec.net/contact.php

  • line selected in the table in jdev11

    I have listener custom selection for table to do things according to the selected line, but when the table has a single row of this line is automatically selected my interlocutor of choice is not triggered, so my question is how to accomplish that, initially, no row is selected in the table?

    Depends on the use case, but you can do this by deleting the attribute selectedRowKeys of the table.

    Pedja

  • How I set the value of a dynamic text field row

    I have a repeated line form that contains a button and several text fields.  There is a text field (input field) above with some information I want to place in the table and several buttons that I want to read the value of and defined on the table.  Excuse me there are several questions I have and I use pseudocode to describe.

    Top shape resembles

    InputField

    | ButtonX1 | ButtonY1 | DescriptionX1 (read the text only field)

    ...

    | ButtonXn | ButtonY1 | DescriptionXn

    OutputRow looks like

    | ButtonOutput | OutputField1 | OutputField2 | OutputField3 |

    So, I want to do

    ButtonX1.click

    {

    OutputTable.OutputRow.addInstance (true) //this works - everything I have questions on

    OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue

    /*

    Question 1

    How should I address the location of each table to set a value

    Question 2

    How can I get the value of the description field in the same row as button and table

    I would like to say something to the effect of the OutputTable.OutputRow [?]. OutputField1.rawValue = this.parent.DescriptionX

    */

    OutputTable.OutputRow.OutputField2 = InputField.rawValue

    /*

    Same question as above - how can I specify a dynamic line - it's the syntax appropriate for obtaining the value of the input field?

    */

    OutputTable.OutputRow.OutputField3 is this. ButtonLabel

    /*

    Question 3

    How can I get the value of the label of the button to set the field

    There should be a lot of these buttons and buttons will be added - I'd rather set the value based on the label of the button to facilitate value - not requiring only not to change the code

    */

    Issue 4--unrelated to those at the top.

    Is it possible to build the first table

    | ButtonX | ButtonY | Description |

    from a XML file.  I've seen examples showing how to build if it's just data, but XML can be pushed into a form with the code to perform the above actions?

    Glad you figured it out... nothing wrong with doing it this way.

    Normally XML contains data and no default legends these xml files are bouond to the rawValue property. You can enable the dynamic linking and other properties of the object will be bindable (they appear as links) in the user interface. If you click on the link to legend an Assistant appears allowing you to bind the node in the XML file.

    Paul

  • Is there a way to allow the end user to change the font color in a text field?

    I didn't know that LiveCycle existed yesterday so I was using the Google a lot.

    I'm building an application form and asked if there was a way to change the font color in a text field. (EXAMPLE: content Original is black.) The notes are in red)

    I have 2 ideas on that, we should type out and highlight, and then click a button to turn red. The other way. I'm more part. Have a radial affecting when turned off, black types. When on, red types. What is the best way to do it or is it still possible?

    Figured it out. Replace 'plain text' 'rich text' and have user support on ctr + e. seems strange to me, but it works.

  • How to convert the string with numbers in the table of Boolean 2D

    Hello

    I have input a string with comma separated numbers 1,192 (starting at 1).

    This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

    The 2D table consists of 4 times of 0.47 Boolean values.

    1.48--> [0.47] numbers [0]
    49.96--> [0.47] numbers [1]
    Numbers 97.144--> [0.47] [2]
    145.192--> [0.47] numbers [3]

    If a '1, 49, 97 145' input string put all [0] [0.3] true.

    How can it be easy/fast resolved?

    Thanks for help

    Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

    In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

    Repeat this step for each number in your table.

    (What is a class assignment?)

  • New line disappears in the table

    I add the new line at my table:

    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("PrfItemImageTempVO1Iterator");
         RowSetIterator rsi = dciter.getRowSetIterator()
         Row newRow = rsi.createRow();
         newRow.setNewRowState(Row.STATUS_INITIALIZED);
         rsi.insertRowAtRangeIndex(0, newRow);
         rsi.setCurrentRow(newRow);

    then add information on the same line, but the line "disappears." However if I commit it is recorded in the database.

    In other words, for each line of the table I can download files. When I download fill the line with the name, the address, the ID of the article to which has been added and its action (insert, update, delete).

    The point is that the line is added but quanho that you enter this information disappears. Although in my impressions, print the correct information.

    If you commit information is also stored in the database.

    I try to update the table, run the query, partial trigger and nothing works.

    2780557 wrote:

    After I clicked on the button DOWNLOAD and add a file on my server and add line information.

    I guess some of these activities is the "walk away" (refresh the table in the database where your changes are not validated)

    As attilas79 suggested, why not try the standard buttons/operations instead of creating the new line by programming?

  • Possible to turn off the legacy of line break in the table of contents?

    Hello

    Say I got a long title stupidly, that I need to address (and subtitle is not an option in this case):

    Lorem ipsum dolor sit amet, adipiscing elit computer. Integer nec odio.

    Due to wide-ish the font size of the header in the document, I want to break this header in two lines.

    However my OCD uses a smaller font size, and so he could sit happily on a single line.

    The problem is that the inDesign TOC seems to be ineriting the soft breakdown and therefore the line break appears in the table of contents too.

    Is it possible to disable / prevent this?

    Thank you!

    Try to use nonbreaking spaces, or without breaks (spaces are less problematic) the part of the topic that you want to wrap instead of the line break is forced.

  • Page numbering and the Table of contents

    I have a book containing 23 document files. Document files contain the page numbers in the footer.

    One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

    the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

    • The title page, in a file by itself, is not numbered
    • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
    • The body of the text in the remaining 17 files is digital (1-243)
    • The generated TOC uses cardinal numbers of the book as a whole. For example,.
      Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
      as starting on page 19, because this is the file real 19th in the book. I put the document numbering
      This file from 1 properties and properties of Page numbering for the book as a whole to
      be "continue."
    • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
      chapters use Numeric

    I tried to regenerate the table of contents, but this did not help.

    Does anyone have suggestions on what is the way prescribed to do?

    OK, I continued to read and this is what I found:

    Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

    Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

    Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.

  • Lines left in the table LT after removal of the direct workspace and the removal of all workspaces

    I had a lot of data in a table enabled version that has been modified in some workspaces.  The LIVE workspace, I deleted all the rows in the table and I then drove back the workspaces (yes I probably should have done differently).  Once workspaces have been cancelled table LT empty, I would have expected, but it wasn't.

    I can reproduce this in the example below.  I insert two lines in the test table and allow it to version.  In a workspace I update a row in the table, which leads to 3 ranks in LT as expected.  Live, I delete the two lines of the table that translates into 5 lines of LT which is fine.  So I restore and delete the workspace I created for the update.  At this point, nothing should versioned LT lines, so I expect to go, but two lines remain.  In my real-world scenario, it is initially questions as the table LT is now much more it must be and requests on the versioned table are slow.

    Is this expected behavior?  Can I do anything to clean?

    Thank you

    John

    scott@JOHNOT> select * from v$version;


BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
PL/SQL Release 11.2.0.4.0 - Production
CORE    11.2.0.4.0      Production
TNS for 64-bit Windows: Version 11.2.0.4.0 - Production
NLSRTL Version 11.2.0.4.0 - Production


scott@JOHNOT> create table test_wm_table (
  2    id number primary key,
  3    name varchar2(20));


Table created.


scott@JOHNOT> execute dbms_wm.enableVersioning('test_wm_table');


PL/SQL procedure successfully completed.


scott@JOHNOT> insert into test_wm_table (id, name) values (1, 'first value');


1 row created.


scott@JOHNOT> insert into test_wm_table (id, name) values (2, 'second value');


1 row created.


scott@JOHNOT> commit;


Commit complete.


scott@JOHNOT> select * from test_wm_table_lt;


        ID NAME                    VERSION NEXTVER     DELSTATUS LTLOCK
---------- -------------------- ---------- ---------- ---------- ------------------------
         1 first value                   0 -1                 10 *-1,-9,-1*$#SCOTT$#
         2 second value                  0 -1                 10 *-1,-9,-1*$#SCOTT$#


scott@JOHNOT> execute dbms_wm.createWorkspace('test_workspace');


PL/SQL procedure successfully completed.


scott@JOHNOT> execute dbms_wm.goToWorkspace('test_workspace');


PL/SQL procedure successfully completed.


scott@JOHNOT> update test_wm_table set name = 'something else' where id = 1;


1 row updated.


scott@JOHNOT> commit;


Commit complete.


scott@JOHNOT> select * from test_wm_table_lt;


        ID NAME                    VERSION NEXTVER     DELSTATUS LTLOCK
---------- -------------------- ---------- ---------- ---------- ------------------------
         1 first value                   0 ,45,               10 *-1,-9,-1*$#SCOTT$#
         2 second value                  0 -1                 10 *-1,-9,-1*$#SCOTT$#
         1 something else               45 -1                 11 *0,10,0*$#SCOTT$#


scott@JOHNOT> execute dbms_wm.gotoworkspace('LIVE');


PL/SQL procedure successfully completed.


scott@JOHNOT> delete test_wm_table;


2 rows deleted.


scott@JOHNOT> commit;


Commit complete.


scott@JOHNOT> select * from test_wm_table order by id;


no rows selected


scott@JOHNOT> select * from test_wm_table_lt order by id;


        ID NAME                    VERSION NEXTVER     DELSTATUS LTLOCK
---------- -------------------- ---------- ---------- ---------- ------------------------
         1 first value                   0 ,44,45,            10 *-1,-9,-1*$#SCOTT$#
         1 something else               45 -1                 11 *0,10,0*$#SCOTT$#
         1 first value                  44 -1                -11 *-1,-9,0*$#SCOTT$#
         2 second value                 44 -1                -11 *-1,-9,0*$#SCOTT$#
         2 second value                  0 ,44,               10 *-1,-9,-1*$#SCOTT$#


scott@JOHNOT> execute dbms_wm.rollbackWorkspace('test_workspace');


PL/SQL procedure successfully completed.


scott@JOHNOT> execute dbms_wm.removeWorkspace('test_workspace');


PL/SQL procedure successfully completed.


scott@JOHNOT> select * from test_wm_table order by id;


no rows selected


scott@JOHNOT> select * from test_wm_table_lt order by id;


        ID NAME                    VERSION NEXTVER     DELSTATUS LTLOCK
---------- -------------------- ---------- ---------- ---------- ------------------------
         1 first value                   0 -1                -11 *-1,-9,0*$#SCOTT$#
         2 second value                  0 -1                -11 *-1,-9,0*$#SCOTT$#

    Post edited by: John OToole

    OK, I see.

    Options (depending on the structure of your current workspace if it is not as simple as in the example) are rollback, purgetable or compressworkspace.

    More information on when and how to use them can be found in this thread: https://community.oracle.com/message/4027735#4027735

    Rollback works in your example, certainly, but might not be applicable in a real scenario.

    Hope that helps.

    Kind regards

    Andreas

  • Orthographic inDesign - ignoring the reference numbers in the tables

    I have a document of 100 pages with several tables.  Each table contains many numbers of different parts, some letters including and others do not.  We do not have any specific format.  Is it possible that I can get the spell check to ignore any word that contains a number in my entire document?  I want to still come out check to check the tables because there are other things other than the numbers of room inside.  I tried using GREP styles to achieve this, but I can't make it work.  Help, please!

    Create a character style that affects the Language of No attribute and apply it to part numbers (use a find/replace query to find them). Does not take into account no. language spell check words.

  • How to avoid to display a line blank in the table component

    Hello

    I create button and a table like in a read-only form.

    Whenever I click on Create Insert button, a pop-up window showing were the person enter the corresponding values and clicking on the "submit" button it should show changes in the table and clicking the Cancel button to return to the page.

    But even when I click on cancel there is always an empty line is indicated in the table. Is it possible to avoid it?

    Thanks in advance.

    In this case, you will need to delete the new created line. Link the button Cancel to a bean method of directly to the delete of the VO method, you used to create the line.

    Timo

  • Progress of blank lines to delete the Table

    Hello
    I added the logic to add 10 empty lines and remove empty lines when the form is submitted. But somehow it only deletes the lines in the current screen of the advanced table. If there are 15 lines and I click next to spend the last 5 years and submit the form he removes only 5 blank lines but not the other 10 lines in the previous section.

    where I am doing wrong?

    Thank you
        Row [] row = null;
    ExpAttendeesVORowImpl rowi = null;
    
    if( expattendeesvoimpl1 != null ) 
      {
        row = expattendeesvoimpl1.getAllRowsInRange(); 
       }
        System.out.println("No of items "+row.length);
    for (int i=0;i<row.length;i++)
      {
         pageContext.writeDiagnostics(this, "in loop ", 2); 
         rowi = (ExpAttendeesVORowImpl)row;
    
pageContext.writeDiagnostics(this, " in loop row "+ rowi.getName(), 2);
    
if((rowi.getName() == null))
    
{
    
pageContext.writeDiagnostics(this, "deleting row"+ rowi.getName(), 2) ; 
    
rowi.remove(); 
    
}
    
}
    

    

    
Thanks

    You can try instead to use:

    expattendeesvoimpl1.getFilteredRows ("name", null);

  • How to validate at least one line selected on the table?

    Hello world

    I have a requirement here to display a list of customers at a table "select unique" and a button to send the page. When the user clicks this button, I need to validate if there is a selected line in the table. What is the best approach tho do?
    I tried to validate it on actionListener in the click of a button, but even if I put adfFaces messages running, it does not appear on the screen and the page is still subject.

    Is the BPM 11 g context of the project, so I have to do this validation and 'Cancel' the submit, otherwise the data passes through the flow until the next activity.

    Maybe the real question is: how to undo a page submit during an actionListener?

    Thank you

    Hello

    Small correction to Vinod, tableBinidng.getSeelctedRowKeys () always returns non-null (returns empty set when nothing is selected), then use the tableBinidng.getSeelctedRowKeys () .getSize () to check if a line is selected or not (0-nothing selected).

    If you do not want to treat the action up to save if an option is selected, why don't you try disable the button until something is selected in the table?

    To disable a button when no rows selected, simply add after the disabled property of a button value update it based on the table (add partialTriggers to the table)

    Jean Lou

  • Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

    I'm creating a template using FrameMaker 7.2.

    MIL - STD dictates works package (such as chapters) page numbers in the format: 0001-1, 2-0001, 0002-1 and 2-0002, etc.

    The problem I encounter draws in this format of the page number in the table of contents generated.

    I used a variable on the Master Page, and generate page numbers in each package to work properly.

    I know that in point 7.2 of the FM, you cannot include a variable in a table of contents generated.

    So I tried changing the variable on the Master Page to text using a paragraph tag (WPnumber), but have not gotten it either works.

    Tried all the other stuff I could think of, too.

    In my view, a part of the problem is that FM cannot have leading zeros when you set the page number or chapter (understandable 99.9% of the time).

    If anyone has suggestions or solutions, I am very interested to hear.

    Thank you.

    1Editor - and puzzled

    I already manually put the zeros.

    I just want to be clear that strikes the zeros directly on the master page does NOT have to include in the table of contents. You then type in the context of the reference to the table of contents also. In addition, you must have separate template and reference pages for chapters 10, 11, etc., in order to obtain the number of zeros correctly.

    With my method, the zeros are introduced as part of the chapternumber itself, in the chapter number of the TEXT. You still have to type but only once for each file.

Maybe you are looking for