Line up on the grid and keyboard increments

Similar Questions

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Want 7640: HP Envy 7640 dropped off the grid and cannot reconnect

  Envy 7640 dropped off the grid and cannot reconnect. I followed the instructions on the previous thread without result - restoring network, cycling settings, router, modem, etc... printer indicates "failure" for the "no filtering". All other wireless devices work fine. Please notify

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system on the computer (including service pack revision) - done

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Is it possible to center the text between any set of verticle lines displayed by the grid?

  I try to be attached to the specific tasks on this background that I use, I turned the grid text. I put the text at specific locations a lot. So it would be a lot easier and faster if I could just automatically center the text between the lines of the grid, rather that manually fiddling with it.

  well commented in this case might get you where you want to go.

  But if you either point frame type or text, it is quite easy to do.

  Turn on snap them to grid from the view menu

  Draw a rectangle to one of the lines of the grid to another (with no fill and no optionsl race)

  then place the text on the rectangle, turn off align it on the grid.

  in the attribute align select on align by object key select the text and the rectangle, click on (with selection) on the rectangle to make the object key (do not hold down the SHIFT key).

  Then in the Align Panel choose horizontal or vertical alignment icon.

  Vertically align the text means that a block of text has close text and even at that it is often subjective if you may need to reposition for a Visual
  accepted balance and sometimes it's true Center horizontal alignment according to the size and utilization of the text.

  Oh Yes after you Center the text you can delete the rectangle.

• macOS Sierra will not be closed if the trackpad and keyboard wireless is connected

  Hi, after switching to macOS Sierra, the first time that I stop my MacBook Pro, it is stuck on the dark screen with the spinning ball. I had to force him to stop by the power button. The next same thing occurs. After looking in the console log, I noticed something related to bluetooth and I discovered that my wireless keyboard and trackpad are both connected (usually, I work with my MacBook Pro on a stand and I use the wireless keyboard and the trackpad). I unplugged the bluetooth and Mac went off smoothly. Did someone else experienced this problem? And does anyone have and idea about it? With El Capitan I could turn off the mac no matter what was connected...

  Thank you.

  GIO

  I try to remove the two devices in preferences Bluetooth, then re - match.

  I use them with a MacBook Pro, but I use Trackpad and keyboard with a Mini and not have not had any problems.

• Questions from the screen and keyboard on Satellite R830-181

  Hello

  I had exactly the same problem with it;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=280934

  I also explained what is it and how it over time in this topic.

  To sum up; my screen and keyboard do not work in my Toshiba Satellite R830-181, 13.3 '' laptop.

  My questions;
  1. is it a motherboard problem?

  2. as it runs on an external monitor, I guess that the graphics card or processor is fine.
  There is no damage on the screen, so I guess there is a problem with the connection of the power supply to the screen.

  If I buy a new screen I have my doubts it will work.

  I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.

  What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  Same question applies to the keyboard.

  3. If I repair or fix myself, you think it will happen again? Because I think that this could be a faulty laptop computer of a certain series of production since someone else has experienced the same thing with this model.

  can 4 - there be a relationship between the non-functional keyboard and screen?

  5. If this can be resolved with a replacement of the screen, that I need to find a laptop screen Toshiba R830 or I can buy any 13.3-inch screen?

  As far as I know this model is not supported by the company more, so it is quite difficult to find a screen R830.
  It is difficult to find a 13.3-inch screen, anyway, but still, if I can use the screen of another model which would ease my problems.

  I need an idea on that.
  Thanks :)

  Post edited by: Cagri87

  > 1 - is it a motherboard problem?
  Not easy to say: If the external monitor works correctly then this isn't problem chart/motherboard.
  The external USB keyboard works properly, if not motherboard problem too.

  > 2 - because it works on a monitor external I guess graphics card or processor is fine.
  Yes, that's correct.

  > If I buy a new screen I have my doubts it will work.
  I do not recommend to buy the new parts before the defective parts has not been verified.

  > I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.
  Good idea to send it to Toshiba service partner since the guys would be able to control parts and fix it.

  > What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  > Same question goes for the keyboard.

  Don t think someone can tell exactly what's causing this according to me its just a bad luck material can start malfunction happens in every possible branch of industries (TV, computer, smartphone, cars)

  can > 4 - there be a relationship between the non-functional keyboard and screen?
  No, the keyboard is only connected to the motherboard, display is also connected to the motherboard, but there is no connection between the keyboard and the display.

• Satellite X 200-line appear on the screen and the computer to stop responding W7

  Hello

  I installed windows 7 a few days ago. I have download all the drivers, but:

  After starting the computer and connecting to windows, if I run an application too quickly (perhaps outlook, google chrome, internet explore explore...), it seems that the pilot does not display (and windows try to restore), and lines appear horizontally on the screen (only have 3/4 left of the screen, the right 1/4 is normal: S). after 30 seconds the screen goes black, and 15 seconds later, a beep comes from the laptop. After that, the only solution is to stop via pressing 5 sec the power :(button

  My graphics card is a nvidia geforce 8700 M GT. I have trid the drivers on the toshiba site (but this is for vista, W7 those not released... for this laptop). It changed nothing, so I download them from the nvidia site (one graduate and Beta 1), same result, it has not changed anyting... (I precise that I uninstall all drivers before reinstalling the new)
  So, I have updated the bios, nothing better.

  I read a solution on the microsoft Web site (for example to remove 5 keys register HKEY_USER /.) DEFAUT/control panel/Desktop and HKEY_CURENT_USER/control panel/Desktop), but these keys did not exist on my system, it couldn't be that.

  So, I'm in the wall.
  Someone has an idea?

  Thank you

  Post edited by: noescape69

  After many internet research, I found an interesting answer, and it was my solution!

  On the nvidia site, you can go the archived drivers.
  For mine (geforce 8700M GT), there are 179, 185, 186 and 195 immediate release. I have download the 179 (oldest), and... everything works great!

  My problem is solved.

  Hope this will help other people!

• M30X in Germany/Austria-question on the language of the OS and keyboard

  Hello!
  I buy Toshiba M30 X (probably-124) in Germany or Austria and I have 2 question:

  -on Windows XP language version - there will be German? English? Is it possible to get the English version? (or maybe I can choose it at the first start of the laptop?)

  -about keyboard version - it will be qwerty or qwertz German specific letters?

  Thank you

  Hello

  The language of the OS is depending on the country, and if you buy a laptop in Germany the OS will be on German. If you want to have the OS on another language (English), you can install the OS of Microsoft Windows XP edition family CD (full version) and all the necessary drivers and tools, you can find on Toshiba download page http://eu.computers.toshiba-europe.com under Support & downloads.

  I don't know, but if you buy a laptop is Switzerland, there's the cell phone comes with recovery DVD including the three languages (French, English and Italian).

  If you buy the laptop in Germany or Austria, it will be German qwertz specific letters.

• Pavilion 550-153NA: allow me to interact with the mouse and keyboard when Windows 7 starts at startup

  Hello

  I am trying to downgrade from Windows 10 in Windows 7. I tried to install Windows 7 but it keeps telling me that "Windows Setup experienced an unexpected error. To install windows, restart the installation. "I rebooted several times, but I still have the error. Then, I tried to install it by starting the drive at startup. All charge very well and the configuration screen appears. But I went to move the mouse, but it should not move. I tried several different mice and keyboards, but there was no hope, both USB 3.0 and 2.0. I did some research and found that you have to enable 'Legacy Support' in the BIOS. I did this, but there was still no movement.

  If someone could apply their knowledge via a comment, it would be very appreciated that I constantly tried since end of December 2015!

  Thank you very much

  I would try this new link.

  __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  Let me know if it works

• NVIDIA Display 6200 I have lines all over the screen and I can barely read what writing

  I have lines on the screen and I reading wrong with everyone writing have the same problem

   

  This is usually a sign that the video card is failing or the monitor is going bad. Have you tried another monitor or tried the card in another computer?