Link fleet inserted html object.

Similar Questions

• Can I insert html objects 5 in muse?

  I'm trying to insert an html object in a muse doc, something I've done many times. This object is a video w/skin, but after I paste in the code, instead of seeing the little spinning wheel treatment, there is nothing. Not even an error message. Any ideas as to what could cause this problem? Any help would be greatly appreciated.

  Thank you!

  Paula

  The problem is probably that you have not downloaded the video on the server. When you embed the HTML code using the Insert HTML code it does not actually download the video - just the code. A gift that what is happening is that your src in code the links in a media folder. If you had downloaded through Muse, it would be in an active case. If download you through muse can change the part of the code that says media and change in assets.

• Cc of the Muse, object > insert html problem

  Select object > inserer insert HTML, paste the code and I get a box with an 'x' in the upper left corner.  It was working fine a few days before, what was wrong?

  

  Please try to get a glimpse in the browser, then check.

  Thank you

  Sanjit

• accordion opens automatically active when an html object is inserted

  I really want to use the widget accordion to hide/show a user input form I made by Caspio. Caspio creates a deployment script that you can embed in a Web page using the html object. Works very well in a regular neighborhood of a web page, but when I put an html with the data page code Caspio object in an accordion it opens / activates automatically when the page is loaded. I tried to "closing" the accordion before downloading the page in Design view, and he always does.

  When I use an html object in a tab container it works fine-just the accordion.

  Does anyone know how to deal with this? I really want to show/hide the user input form and not find a better way. I prefer not to do a popup if possible. Any suggestion would be appreciated.

  Yes, just relaxing on your own button overlay and make transparent trigger.

• Muse cc insert HTML

  OLA tenho uma put em ao Supreme muse cc e a seguinte

  na parte superior em object e preview HTML

  Pode - to preview HTML only or also other linguagens

  of progamacao por exemplo ASP.NET/JQUERY/PHP.

  POR FAVOR ME HELP

  GRATO

  Hello I have a doubt in question to muse cc which is as follows

  on the top object and embed HTML

  You can insert HTML only or also other languages

  sometimes of these ASP.NET/JQUERY/PHP program.

  PLEASE HELP ME

  GRATEFUL

  Please visit these links:

  http://www.thejohnnyoshow.com/coding-corner.html

  https://forums.Adobe.com/thread/1302382

  Help! Add Jquery to Muse!

  https://forums.Adobe.com/thread/995208

  Thank you

  Sanjit

• You can insert HTML on the stage

  We are obtaining a video content management system that uses an iframe and a link to a JavaScript file to play video. We use tools like Captivate and Adobe Presenter to create e-learning for our learning management system. Captivate has a Web object that allows me to insert in the HTML code but the presenter doesn't seem to have the same capacity. I thought that I might be able to create a player using their code in Flash Pro, then insert the swf file in Presenter. Is anyone aware of a widget or other method to insert HTML code in a Flash file?

  Thank you

  Jeff

  You can use the htmlloader class if you create an air application.

  a swf file that is embedded in an html file or stand-alone, you can use navigateToURL.

• Windows Mail - insert HTML signature?

  Greetings,
  Using Windows Mail (Vista), I tried to follow the instructions: http://www.timeatlas.com/mos/Email/General/Create_Image_Signatures_in_Windows_Mail_or_Live_Mail/
  When insert > file htm or html Signature, email image won't display, only a red X. So I kept Live Mail tips, with the same result.
  Bed Notepad the HTML code and maintains the path information.
  the same file to be opned in widows Mail REMOVES the path information.

  Basically, it seems once I saved the HTML it adds or removes information, which makes the image is no longer visible.

  Windows Mail - insert HTML signature?
  (1) path Info IS recorded and visible in Notepad.
  (2) Windows Mail is to REMOVE the path information
  [url = http://img19.imageshack.us/i/widowsmailhtml.jpg/] [img = http://img19.imageshack.us/img19/4718/widowsmailhtml.th.jpg] [url]

  Hey sadicus,

  Welcome to the Microsoft Answers Forum!

  1. this problem may occur if the Windows Mail is unable to locate the source of the image to be included in the e-mail message.

  2. to resolve this problem, use a text editor (such as Notepad) to edit the custom signature HTML file to add the full path of the location of the graphics file information before sending the e-mail message.  Here is an example of the code without the path:

  

  3. This example of HTML refers to the Test.gif file. Only the source of the image (img src) information, lists the file name, but does not list the path to the files. In this example, you would change the HTML code:

  

  4 take a look on the link below for more information on changing the settings of Signature:

  http://windowshelp.Microsoft.com/Windows/en-us/help/16a3d6df-C247-4168-A576-c29d07c746ef1033.mspx#EYB

  I hope that the information above helps you.

  Kind regards

  Manasa P-Microsoft Support

• Help with a script that converts the HTML object text box

  I don't know anything about programming scripts and unfortunately inDesign isn't any panel actions as Photoshop..

  I need a script to convert a text box with HTML code inside a HTML object... I think not, it should be very difficult

  How could be the following:

  (1) select the text box
  (2) cut all text inside
  (3) remove the empty box
  (4) select selection tool
  (5) go to OBJECT/INSERT HTML
  6) paste it into the code before you cut the text box
  (7) OK and close the menu INSERT HTML code

  If the Script works, we could change with HTML code inside a text box to an object HTML (video, card, animations,...)

  The first step could be manually selecting each text box or by selecting all of the boxes that start automatically by "< iFRAME '

  1000 thanks

  Remember that you can not get an answer it if you don't show any attempt of your choice.

  FWIW

  Loïc

• How to insert HTML custom in tabbed panels Widget

  I need to insert HTML in a tab panel Widget.

  I have an HTML table with the data that I have to put in a tab panel Widget.

  I tried to create the custom HTML and dragging it in the area of the tabs Panel that did not work.
  I tried the content area of the Panel tabs, then click to insert custom HTML that has not worked.

  And now, I'm of ideas on how to achieve this.

  Thanks in advance

  Ho!

  So I thought about it for me.

  If you are wanting to insert HTML custom in a tab panel, make sure that you have selected an object in the content area of the Panel tabs. Then select Insert HTML code.

  I have just placed a text box in the tabs Panel, selected the text box so that it is highlighted and then chose to insert custom HTML.

  This put my HTML custom code in the content area of Panel tabs.

• You can link two dynamic text objects?

  This is a question about dynamic text objects.  Is it possible to link two dynamic text objects so that they flow together into an email or a landing page?

  For example, say you have two dynamic text objects, DTO1 and DTO2.  Also assume that DTO1 can vary in length, for example, two lines of five lines.  Is it possible to establish that DTO2 runs immediately after DTO1 to say, a single line of space empty between them?  I see no way to do it in email or the landing page editor, but perhaps that there's a way to do it with html or another approach.

  Thank you

  Andy

  Hi Andy,.

  Yes, to do this with html raw. Once you have the code, you can either put in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.

  First of all, you need get the HTML for your dynamic elements. It's kind of awkward to get this code but not too difficult.

  • Open a downloaded landing page or sent e-mail. You can not access the landing pages or emails that have been built using the Eloqua editor code.
  • Display dynamic content browser and search for your dynamic elements
  • Drag them into the section code of your destination or by e-mail page
  • Copy the code that gets placed there then the output of the page destination or email without saving changes
  • The code should look like this:
    • It is a piece of sample code for an element of dynamic content

  Now, when you build your email or a landing page which will contain both of these two elements of dynamic content just sticking two snippets in there and separate with a line break)
  
  ) to get the bit of empty space. As I've mentioned above, you can place code in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.

  In fact, if your final product should be a page external destination loaded or email you could save yourself the time and code just in a place-holder when you generate your html code. Then when you're done uploading, please drag the dynamic elements in the code of the dynamic browser and add your line breaks.

  The final code should look like this:

  It is a piece of sample code for an element of dynamic content

  
  
  

  This is another sample of code for an element of dynamic content

• Linking with many display objects, then 2

  Hello

  Is it possible to create a link with several display objects then 2. There are two objects in view I want to put a link with a common master view object. is this possible? If Yes please tell me how to do it.

  -Thank you

  Hello, Uthman.

  As suggested by Ibtisam Zafar and 1000723 user, you can do with two links associated with the same master VO.

  I think that what's missing to make adds master and two details in the page (steps 5 and 6).

  For example, if we have a MasterVO as a master, the FirstDetailVO and the SecondDetailVO as a detail:

  1. create a link to display based on MasterVO and associated with FirstDetailVO via the idMaster field, named FirstDetailMasterVL.

  2. create a link to display based on MasterVO and associated with SecondDetailVO via the idMaster field, named SecondDetailMasterVL.

  3. in "Module-> Application data model", adds MasterVO (MasterVO1). Then, add FirstDetailMasterVL (FirstDetailVO1) and SecondDetailMasterVL inside MasterVO1.

  4. in the control of data, you can see MasterVO and inside, you will see FirstDetailVO1 and SecondDetailVO1.

  5. in the ViewController project, you can insert in the page "FirstDetailVO1" as a master-detail.

  6. to insert SecondDetailVO detail, you can add it as a table or a form. You insert SecondDetailVO as a master detail.

  You can see how the two details are updated as you navigate through the lines of MasterVO1.

  RFH.

• Background color "Insert HTML"

  When I use the object > insert HTML code...

  the inserted HTML background is white. However, I need a transparent background, because it is a form to put on a gray background.

  How can I make the background transparent?

  Thanks for anyone who can help you.

  In the code of your form, you have the background value #fff which is white. Your code has this:

  #mc_embed_signup {background: #fff; clear: left; font: 14px Helvetica, Arial, without serif ;}}

  Remove this part:

  Background: #fff;

• insert html in a composition in muse

  Hi, I am trying to insert html into a publication in Muse.  I would like to have a clickable button trigger, and then a sort of superposition opens with an interactive calculator inside.  I have the HTML for the calculator, the problem is no matter how I try to insert into the Muse, the calculator either disappears for some reason (as well as the trigger), or the calculator stays on the page all the time, losing all clickable effect.

  Can someone tell me the best way to do it?

  Hello

  The Composition of which you are trying to use? White, Star News, Lightbox display, presentation or Tooltip?

  Also make sure to drag and drop the HTML window inserted above the target (border of the target is enabled once you move on), I hope that it will work.

  I even created using the composition of the balloon and its working very well. Please take a look at the link.

  Home

  If it does not work please share the calculator code HTML that you insert so that I can do some testing at my end.

  Concerning

  Vivek

• Integrate an exported Muse Page using "insert HTML"?

  Hi all

  I would like to export a Muse page in HTML format, and then incorporate the entire page into another page to Muse using Insert HTML code. I did some experiments and have yet to get to work.

  I am familiar with integration html in Muse, including external linking of libraries of js and css style sheets, and I am also reasonably warned post-editing my Muse pages in Dreamweaver. But it left me speechless.

  Does anyone have an experience to share? Thank you!

  Bart

  Hi Bart,.

  I don't know why you want to start by exporting the page and then embed it in HTML in another page of Muse. However, you can copy all the content of a page and use the option "Paste in place" from the Edit menu and all the content will be placed on the source page.

  Kind regards

  Aish

• By aligning several HTML objects on a page?

  I have a page that requires several HTML objects - I have inserted the code in the object > insert HTML, but they are all out of alignment in both the preview within the Muse and preview this page in a browser, even thought that they are perfectly aligned on the creation page. I tried to group the items, but it does not work. Does anyone know how to make sure they all stay in alignment?

  Hello

  This kind of problem occurs generally if the rectangle of the object is greater than the size of the object. He pushes the adjacent object, resulting in misalignment. Please check and make sure the rectangle of the objects is not bigger than the real object.

  Kind regards

  Aish