File owner permision problem after formatting my system

Similar Questions

• Unable to connect to wireless internet after formatting the system.

  Original title: Mr

  Hi, please my dell Inspiron gives me a serious problem to connect to any wireless router, I can only use moderm to brose, I can't connect to any wireless network, this happened to me after that I have format the system but all other things work.

  Hello

  Thanks for posting your query on Microsoft Community forum.

  As you mentioned after formatting the system, you cannot connect to a wireless router, I recommend updating the firmware on your router and updates your wireless network adapter drivers, as there might be a chance that the wireless drivers are deleted.

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.

  You can refer to the link provided below to update the drivers from the manufacturer's website.

  DELL drivers.

  If the problem persists, I suggest you try the below mentioned methods and see if it helps you to solve the problem.

  Method 1:

  First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

  See the article below to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2

  
  

  Method 2:

  This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

  Follow the steps in the following article to troubleshoot network adapter.

  How can I troubleshoot network adapter?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See also: Wired and wireless network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Can I delete system files from Windows.old after format?

  I reformatted my computer recently and I usually remove the Windows.old folder. What I never understood are system files that it contains. Can I remove them?

  Whenever I've upgraded to Windows 7 I reformatted and delete the windows.old folder and files system for Vista and had no problem, but he never did with the same program. So is it safe or should they be not deleted?

  Hello

  Remember there is nothing in the Windows.old folder or its subfolders you need before
  you remove.

  How to remove the Windows.old folder in Windows 7
  http://www.SevenForums.com/tutorials/19151-Windows-old-folder-delete.html

  How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  How to remove the Windows.old folder that is generated when you perform a custom
  Windows Vista Setup (also Windows 7)
  http://support.Microsoft.com/kb/933212/en-us

  How to remove and delete the folder Windows.old on Vista or Windows 7
  http://www.kodyaz.com/articles/delete-Windows-old-removal.aspx

  I hope this helps.

• Problem after formatting flash wlc 2504

  Hi people! I have had problems with the update of the WLC 7,0 to 7,2 image and made a BIG mistake... I had formatted the flash. So now, I have not installed on my WLC RTOS. The only thing I have is the bootloader 1.0.16. Of course, I can not install the code file (*.aes). I think I need a RTOS install first? but where can I get one for this unit? Or maybe I can install one of the RTOS of openwrt (for example) simply enter a line of normal control or web GUI, after I install (upgrade) the image normal .aes. Please give some suggestions what to do. Thank you!

  You will need to open a folder of TAC and the engineer can guide you through to the image on the WLC.

  Sent by Cisco Support technique iPhone App

• ProBook 6470b: problems after format the laptop and load the W7

  Hi all

  Here are my problems:

  After 2 years using the laptop, I decided to format it and reboot with the disk W7 of professional origin.

  At the same time, I exchanged the original SATA HDD with a new SSD in Kingston.

  After you have installed all the drivers, it seems to work very well and much more quickly, but has two problems:

  1 - the automatic update of Windows does not work. Only is looking for available updates, but it ends, even > 24 h research.

  2. before reinstalling, my battery lasts for 5 hours. Now only 2 to 2.5 hours.

  Does anyone have any ideas on how to solve my problems?

  Thanks in advance.

  Ernest

  Good, glad it worked

  Have you had any success with the BIOS settings? Contact HP support directly for this may be a good idea here.

  Captain_WD.

• Not able to burn the files to the disk after formatting CD

  Format a CD.

  I formatted my CD, but I'm wondering if I can cancel that somehow because I can't burn audio CD files when it is formatted. I'm not saying that it is not possible, butIdon't know how. When it is not formatted, so I know how to burn CDs.

  Hello

  Close all programs, put in a blank CD and select the music files.

  These should help you:

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem after restarting the system

  Hello

  a few days after that restart the computer began to appearan error, I tried to find a solution somewhere but has failed

  p.s

  is connected with the domain name.

  This is the screen with the show window,

  Please help me!

  

  Your network administrator can help you solve this problem.

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• Partition problem after the recovery of the system with a single key 6.0

  I need your help!

  My Lenova Ideapad Y430 not more start and I had to restore the system with the recovery CD I burned with a recovery key 6.0. The restore process showed no defects and no error has occurred.

  Now, after restaring the system I only 0 with a C: partition (all program files, vista, drivers etc.) 104 GB and the 'part of recovery for a key' 14.75 working. D: partition where all my documents, pictures etc. are stored are listed, but idle and not accessible nor editable with the tool Vista Diskmanagement.

  No idea what I can do?

  You can download EASEUS partition manager. It will help you to reformat the D drive.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• Is it safe to delete Windows.old files after doing a system restore?

  I would like to know if it is safe to delete Windows.old files after doing a system restore. I did two restorations system in a year or two, and I have two files labeled "Windows.old" and "Windows.old.000" which are just take a lot of space on my computer. I heard that it is safe to remove them, but only if some files are copied correctly. How do you know if those files are copied on?

  Thank you!

  Hello

  It is safe to delete

  but get your data off it 1 if necessary

  you are the one who has to decide if you have recovered your data from the windows.old folder, until you remove

  Here's how to recover data from it

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  She remains totally unchanged, regardless of how many times it is loaded in the computer.

• How to recover the Windows operating system to factory settings after formatting the hard drive?

  * Original title: lost the original os pack

  I formatted my hard drive due to virus attack. so my original os is also lost in formatting.now im using, with windows 8 form, a service on the local computer, it is possible to recover my system to the scene when I bought it.

  Monday, December 21, 2015 11:13:36 + 0000, vishwanathragunath [Insider]
  wrote:

  I formatted my hard drive due to virus attack.

  Why? It is almost never necessary. A good anti-virus program can almost
  always remove the infection. And often leads to problems with formatting
  as you have discovered. Even if you have no problems, it creates a lot
  work for you.

  so my original os is also lost in formatting.now im using, with windows 8 form, a service on the local computer, it is possible to recover my system to the scene when I bought it.

  If you have or can get a DVD installation or a recovery partition,
  Yes. Otherwise, no.