Link jumps to slide then stops

Similar Questions

• Just slide slows, then stops

  I published an exe to see my film to make sure it looks right and on a slide, I see just slow progress bar and then stops. I have to hit the button "Next" so that he can go to the next slide. I looked and can't seem to understand why he did this. Any suggestions?
  
  Thanks in advance.
  
  Thom

  Hi Thom

  Have you looked at the slide in question to see if she may be one of the following objects?

  * Click the box
  * Button
  * Text input area

  Look at the timeline and make sure you watch all the objects.

  See you soon... Rick

• Jump to Slide Audio Incorrect reading

  I am using Captivate Version 8.

  I have a button on the slide #7. This button actions are defined to access the slide #5. When I saw the project and click on this button, it jumps to the #5 slide, but it plays audio from slide #4. From the audio of a minute, he plays the audio OK slide #5.

  I tried to create an advanced action which would jump to slide #5 and audio triggered stop. This has not fixed my problem.

  Any suggestion would be appreciated.

  Thank you!

  Make sure that the clips audio on slides 4 and 5 do not touch the beginning or end of the timeline on the slides.  If the audio is difficult against the ends of the timeline, then Captivate sometimes "assemble" audio clips.  You want them to be separated.

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• jpg files visible, then stopped but works on Internet Explorer.

  The source code of the page has the jpg files but does not show, but it works on Internet Explore. On Firefox, I can still use the zip file to get the jpg files, but it is more convenient to see to see which ones I want. It worked, but then stopped. Here is the link for the page - http://www.wpanorama.com/panoramas.php
  Thank you.

  The preview is made via a Java applet.

  Your list of details more system does not display the Java plugin, you need to install it.

  • https://support.Mozilla.com/kb/using+the+Java+plugin+with+Firefox
  • http://KB.mozillazine.org/Java
  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html (Java platform: download JRE)

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• I'm taking classes online and since the new UPGRADE to 4, I can't download PDFs from the site unless they are less than 2 MB. It downloads for a few seconds then stops and no message appears.

  I connect to online courses. I click on the link to a PDF on the site. It gives the message it is downloading, then stops. With less than 2.0 MB PDF files load, but nothing more.

  No chance that your school uses Blackboard / WebCT?
  
  If so, Firefox 4.0 has not been certified as being compatible with this software.

  See this page in Blackboard KB to see which version of Firefox is certified for the version of Blackboard Learning System Vista or THIS used in your school.
  
  http://KB.Blackboard.com/pages/ViewPage.action?PageID=45581177

• After that switch on my PC works for a minute then stops, this happens 3 times then starts with the last good Configuration

  It started only four days ago, I spend on the PC runs for a minute then stops. This can happen in 3 or 4 times. can Ichoose last good known Configuration and running a CHKDSK and usually begins.

  Hello

  1. Since when are you facing this problem?
  2. Did you make any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  If the computer works fine in safe mode, then I suggest you perform the check and clean boot if this can help:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  For more information, see this link:
  http://support.Microsoft.com/kb/320299

  It will be useful.

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• HP 4480 printer prints only first three lines, then stops

  Dear community,

  problems with my printer recently.

  Page begins printing, 3-5-7 lines, then stops, the printer says busy and the work never ends.

  Initially, there was a mistake with compatible OHCI 1394 host controller. I have upated the driver to that with the extension of the LEGACY software. He printed for a day and returned the nastiest non-printing again.

  Sometimes, the printer selects the fax mode and when I go into the properties to correct for PRINTER, it still doesn't work in the unual 3-5 lines of the page.

  I hate to throw my machine to landfill, be eco-friendly.

  Can someone tell me WHAT IS the reason for my problem?

  Need help URGENT.

  Laura

  Hi @multitasking,

  Welcome to the HP Forums!

  I noticed that your HP 4480 printer prints only the first three lines, then stops. I'm happy to help you with this printing problem!

  To get help, I'll need to know:

  1. The number of product/model of your printer. Follow the instructions in this link. Find your model number of the HP product.
  2. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  3. If the printer is connected, wireless, or USB.
  4. If the printer is able to make copies.
  5. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Please see this post, want good answers? Ask good Questions, by @Bob_Headrick, then you can get the most out of these forums.

  If you are using Windows, please try the HP print and Scan Doctorand let me know what happens!

  Thanks for posting, and I hope to hear from you soon!

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• My HP Officejet J3680 all-in-One printer prints sometimes and then stops.

  original title: my HP Officejet J3680 all-in-One printer prints sometimes and then stops.  What should I do?

  My printer was out of paper before I have had already sent a message to print.  Bllinked, meaning light that he was in the paper.  However, when I added the paper it has stopped printing all together.  This has happened on various acassions.  My printer, HP Officejet J3680 all-in-One, has only six months.  In addition, it only prints a copy at once, although I ask several copies.  What should I do?

  You can see in the Forum of Support HP

  HP printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Also have a look at these tutorials:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.